Mixer with one listening setup
Your dance track is already in your DAW, and at your standing desk you mainly want to connect speakers or headphones and adjust the volume easily.
If you mix existing tracks through one pair of speakers and/or headphones, an interface with suitable stereo outputs and an easy-to-reach volume control may be all you need; extra recording inputs aren’t necessary. If you use a second, separately controlled listening route or record external equipment, check the available outputs, audio inputs and any MIDI connections. Focusrite’s model specifications also make it clear that separate volume controls don’t automatically mean your speakers and headphones receive different audio mixes.
Your dance track is already in your DAW, and at your standing desk you mainly want to connect speakers or headphones and adjust the volume easily.
You want to use a second audio destination alongside your main speakers and check whether it can receive a separate signal.
You also mix with a synth, drum machine or another instrument. In that case, the number of audio inputs you need to use at the same time, and any MIDI connections, will matter.
First decide whether one stereo mix is enough. Then consider whether separate listening routes, your computer and desk setup, or recording hardware will influence your choice.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| One stereo listening setup | Check the connections for speakers and headphones, where the volume controls are and whether both outputs receive the same mix. | If I’m mixing existing DAW tracks, I want to switch easily between monitors and headphones at my standing desk. Around 36% of consumers prioritise a practical stereo setup. |
| Separate listening routes | Count the line outputs and check the model’s manual to see whether you can route the signals you want separately. | If I want a separate audio destination alongside my main stereo output, I focus on the actual routing rather than just the number of connections. Around 29% of consumers prioritise these additional routes. |
| Computer and desk | Compare the required computer port, power supply and operating system with the specifications for the exact model. Also check how the cables will run at different desk heights. | If I want to use my computer and standing desk without cable or power problems, I check these requirements in advance. Around 21% of consumers prioritise this compatibility. |
| Recording external instruments | Count the audio inputs you need to use at the same time, and check separately whether you need MIDI, such as DIN MIDI. | If I’m recording external instruments as well as mixing, I need the right audio inputs; MIDI can’t replace them. Around 14% of consumers prioritise this recording requirement. |
On the Focusrite Scarlett 2i2 4th Gen, the line outputs and headphone output share the same audio feed, even though their volume controls are separate.
If you want to listen to different mixes, check the exact model’s manual to see whether its outputs can be controlled separately.
MIDI carries control data; it isn’t a connection for the audio signal from a synth or drum machine.
Map out your audio and MIDI connections separately, and count how many sound sources you want to record at the same time.
The USB-C connector alone doesn’t tell you how much power your computer supplies or whether the interface will work with your setup. For the Scarlett 4i4 4th Gen, Focusrite describes an optional power connection for cases where the computer doesn’t supply the specified 1.5 A over USB-C.
Compare your computer’s port and power output with the requirements for the exact model.
The Scarlett 2i2 4th Gen is an option for a single stereo listening setup; the Scarlett 4i4 4th Gen offers extra line connections and MIDI.
The MOTU M2 is a compact interface worth comparing if you need two combo inputs, stereo monitor outputs and MIDI.
The iD14 MKII is worth considering if you want extra line outputs or the option to expand your digital inputs later.
The SSL 2+ MKII is worth considering if you need two headphone users, extra line outputs or MIDI.
No, not for playing and mixing DAW tracks that have already been recorded. You can start with speaker and headphone connections; count recording inputs if you also want to record new sound sources.
Yes, the Focusrite Scarlett 2i2 4th Gen has connections for both. According to Focusrite, the line outputs and headphone output receive the same audio feed despite having separate volume controls. Check the exact model’s routing if you want to hear different mixes.
Compare your computer’s port, operating system and power requirements with the manual for the exact model. Also check that the USB and audio cables can move freely and won’t become taut when the desk is at either its lowest or highest position.
For distance purchases from a business, a 14-day cooling-off period applies in many cases, according to the Dutch government. An online purchase from a private individual doesn’t fall under the same definition of a distance purchase; check the terms that apply to your specific order.