Voice editor who isn’t recording anything new
You edit existing introductions and mainly need a suitable headphone connection; extra recording inputs aren’t automatically necessary.
You don’t necessarily need a separate audio interface to edit existing voice recordings: first, check whether your computer’s headphone output is suitable. If you also record voices, choose an interface based on how many microphones you use at once, and check that the USB port, cable, power supply and software are compatible with the exact model. USB-powered doesn’t mean every computer port can supply enough power.
You edit existing introductions and mainly need a suitable headphone connection; extra recording inputs aren’t automatically necessary.
You edit and record one microphone at a time, with headphone monitoring and possibly power from your computer. Focusrite, PreSonus and Audient describe models with one microphone input.
You may want to record two voices at once or capture audio from your computer. MOTU, Behringer and Steinberg describe models with two microphone preamps; loopback is a separate feature mentioned by MOTU and Steinberg, among others.
First, decide whether you’ll only be listening to existing recordings. Then check USB power requirements, and only then choose the number of microphone inputs and whether you need loopback for your recording work.
| What to consider | What to look for when buying | Who should pay particular attention? |
|---|---|---|
| Power without an extra mains socket | Compare the power requirements of the exact model with the USB port and cable. Focusrite specifies 900 mA for the Scarlett Solo 4th Gen; Audient states that the iD4 MKII requires at least 0.9 A at 5 V via a USB 3.0 port. | If you have few spare mains sockets, you’ll want to know whether your computer can power the interface. Around 36% of consumers say that avoiding the need for an extra mains socket is their main buying concern. |
| Listening to existing voice recordings | Try your current computer output first. If you’re considering an interface, check that its headphone socket, volume control and software compatibility suit your setup. | If you mainly edit existing introductions, you’ll want a suitable way to listen back without paying for recording features you won’t use. Around 29% of consumers prioritise listening. |
| Recording one voice | Check for an XLR microphone input and direct monitoring. An instrument or line input isn’t automatically a second microphone input; only check for 48 V if your microphone needs it. | If you record one voice yourself, you’ll want to be able to connect your microphone and hear yourself while speaking. Around 21% of consumers say recording one voice is their main need. |
| Two voices or computer audio | You’ll need two usable microphone preamps for two XLR microphones. If you want to record computer audio, check for loopback and the relevant driver separately; this is different from direct monitoring. | If you work with two speakers or want to capture computer audio, you’ll need access to the necessary inputs or signal routing. Around 14% of consumers prioritise these additional sources. |
A matching connector doesn’t, by itself, tell you whether the port can supply the required power. Audient states that the iD4 MKII requires at least 0.9 A at 5 V via USB 3.0; Steinberg specifies requirements for USB-C cables for the UR-C series.
Before buying, compare the port, available power and cable specification with the requirements of the exact model.
On models such as the Focusrite Scarlett Solo 4th Gen and PreSonus AudioBox GO, an instrument or line input is different from a second XLR microphone preamp.
Count how many XLR microphones you want to connect at once, then check the number of microphone inputs separately.
Direct monitoring lets you hear an input signal while recording. Loopback can make computer audio available to your recording software, so the two features serve different needs.
Choose direct monitoring if you want to hear yourself while speaking, and check the driver and signal routing separately if you want to capture computer audio.
Focusrite describes the Scarlett Solo 4th Gen as suitable for recording one voice via XLR, with a separate instrument/line input and headphone playback.
PreSonus describes the AudioBox GO as a compact interface with one microphone/line input, an instrument input and USB-C power.
Audient describes the iD4 MKII as a USB-powered interface with one microphone preamp and a headphone function.
According to MOTU, the MOTU M2 combines two XLR/TRS inputs with USB bus power.
Behringer describes the UMC202HD as having two combination XLR/TRS inputs and USB power.
Steinberg describes the UR22C as a 2-in/2-out model with two microphone preamps, monitoring and loopback.
Not necessarily: first, try your computer’s existing output and check whether your headphones are suitable for listening. Only choose recording inputs if you also want to connect new sources; this doesn’t mean that built-in and external outputs perform identically.
The connection needs to provide both the required data link and enough power. Audient states that the iD4 MKII requires at least 0.9 A at 5 V via USB 3.0, while Steinberg sets specific requirements for USB-C cables for the UR-C series. Check the requirements of your model and computer.
Set the input gain while speaking at your loudest normal level. Focusrite warns that setting the level too high can cause clipping, while setting it too low may make noise audible when you increase the volume later. Follow your model’s manual.
No. The Netherlands Enterprise Agency describes CE marking as a manufacturer’s declaration of conformity, not a quality mark or a guarantee of safety. The EU rules that apply to a particular product must be established for that product; don’t rely on a logo alone.
If you want to connect two XLR microphones at once, check that the interface has two usable microphone preamps. An instrument or line input doesn’t automatically count as a second microphone input.