Who is this guide for?

Demo editor who mainly listens on headphones

You mainly edit recorded tracks and want simple control of your headphones or speakers. Accessible controls and the right connections matter more than extra recording channels.

Singer-songwriter recording new takes

You switch between editing and recording new takes. Your choice will depend, among other things, on the combination of microphone and instrument inputs, and the monitor mix.

Songwriter with several sound sources

You might want to use two microphones or MIDI equipment, for example. Count the inputs and check which sources you can actually connect and record at the same time.

What should you look for?

Start with how you use your demo: playback calls for suitable outputs and controls, while recording new takes puts extra demands on inputs and monitoring.

What to consider What to look for when buying Who should consider this?
Listening back to demos Check the headphone connection, speaker outputs and how you control the volume. If I mainly listen to existing tracks, I want to switch easily between headphones and speakers. Around 29% of consumers prioritise playback.
Recording new vocal or instrument takes Count the microphone and instrument inputs you can use at the same time, and check whether you can mix the input signal with audio from your computer. When I add vocals or guitar to my demo, I want to connect the sources I need at the same time and hear myself clearly. Around 23% of consumers give recording new takes top priority.
Setting up at a sit-stand desk Decide where to place the interface and computer. At both the lowest and highest desk positions, check that cables are not pulled tight and controls remain within reach. If my desk moves, I want to be able to use the interface without cables getting in the way or being pulled tight. Around 18% of consumers prioritise a practical desk setup.
Connecting to a computer Check operating system support, the computer port you need and which cable is included with the exact model. Before choosing, I want to know whether the interface works with my computer and software, and which cable I need. Around 18% of consumers start by checking computer compatibility.
Adding sound sources or MIDI Count microphone preamps and inputs you can use at the same time separately; also check that the interface has the MIDI connection you need. If I want to use a second microphone or MIDI device later, I don’t want to rely on the number of visible connections alone. Around 12% of consumers prioritise expandability.

Common buying mistakes

  • Counting every visible connection as a recording channel

    On the Focusrite Scarlett 2i2 4th Gen, four physical input sockets do not mean four analogue channels can be used at the same time. Focusrite says that connecting a front-panel jack disables the corresponding XLR input.

    Make a note of which sources you want to record at the same time, then check the channel layout for the exact model generation.

  • Assuming an extra USB port is a fully powered hub

    According to Arturia, the extra USB port on the Arturia MiniFuse 2 delivers up to 250 mA at 5 V. This may matter for the device you connect to it.

    Compare the device’s power consumption with the stated limit.

    If the connected device needs more power, you may need a separately powered hub.

  • Assuming USB-C on the interface guarantees computer compatibility

    A USB-C connection on the interface does not automatically tell you which cable or computer port will suit your setup. The Focusrite Scarlett Solo 4th Gen manual lists a USB-C-to-A cable as included.

    Before buying, check the computer port, cable and operating system support for the exact model.

    Depending on your computer, you may need a different cable or a suitable port.

Brands to compare

Focusrite

The Scarlett Solo 4th Gen is a compact option for one microphone and one instrument or line-level source. The Scarlett 2i2 4th Gen is worth considering if you need two analogue channels.

  • Focusrite lists separate headphone and speaker volume controls, as well as direct monitoring, for the Solo.
  • On the 2i2 4th Gen, connecting a front-panel jack disables the corresponding XLR input. Check the channel layout for the right generation.

Audient

The iD4 MKII is worth comparing if one microphone, one instrument and two headphone connections suit your workspace.

  • Audient lists a monitor mix, two headphone outputs and USB 3.0 bus power for the iD4 MKII.
  • This model has one microphone preamp, so it is not automatically suitable for connecting two microphones at the same time.

PreSonus

The AudioBox GO is designed for a compact setup with a microphone and instrument. The Studio 24c lists two mic, instrument or line inputs.

  • PreSonus says the AudioBox GO lets you connect a microphone and instrument at the same time. It also has a Mix control and USB power.
  • Choose the Studio 24c based on the sources you really want to connect at the same time, not just the number of available inputs.

Arturia

The MiniFuse 2 is worth comparing if you want two inputs, MIDI connections and an extra USB port.

  • Arturia lists a monitor mix and headphone control.
  • According to Arturia, the extra USB port delivers up to 250 mA at 5 V. Check that this is enough for the device you want to connect.

MOTU

The M2 is a two-channel model worth comparing if you want to connect two mic, line or guitar sources.

  • MOTU’s specifications list two combo inputs and separate controls for headphones and monitors.
  • The low latency figure quoted by MOTU applies to the associated test settings and is not a comparison with other models.

Audio interfaces on Joybuy

Related products coming soon.

Frequently asked questions

Do I need two microphone inputs to edit recorded tracks?

No, not for playing back existing tracks. First, choose outputs and controls that suit your headphones and speakers; decide how many inputs you need based on the sources you want to record.

How can I avoid hearing myself with a delay when recording a new take?

Choose a model with direct monitoring or a mix control between the input and audio from your computer if you need this feature. Focusrite says direct monitoring sends the input signal straight to the headphone or line outputs. Check separately whether you want to hear software effects while recording.

What should I consider when setting up at a sit-stand desk?

Position the interface so you can reach the controls, and check the USB, headphone and speaker cables with the desk at both its lowest and highest positions. For the exact model, also check the computer port, cable and any driver support; bus power alone does not guarantee that it will work with every computer setup.

What rights do I have when buying online in the Netherlands?

For distance purchases, you generally have a 14-day cooling-off period. You are also entitled to a product that is fit for purpose; according to the Dutch government, Dutch statutory warranty has no fixed time limit. For a specific order, check the seller and the applicable terms and conditions.

Does an audio interface sold in the Netherlands need to have a CE mark?

That depends on the product category. According to Ondernemersplein, CE marking is compulsory for products covered by a designated product category; the mark cannot simply be applied to other products. Check the product information for the specific device.