If you’re only editing existing tracks and your computer’s headphone output does the job, you don’t necessarily need a separate audio interface. An interface is most useful if you want to connect a microphone or instrument, need separate headphone controls or want to use more sources at once. Check the inputs you need and compatibility with your computer before buying.
Who is this buying guide for?
Demo editor who mainly uses headphones
If you mainly work with existing tracks alongside colleagues, first check whether your computer’s headphone output does the job. If you choose an interface, an easily accessible headphone output and its own volume control may be more important than extra recording inputs.
Songwriter adding new parts
If you occasionally want to add vocals or guitar to your demo, check that the model has the right microphone and instrument inputs. Also find out how you’ll hear the live input alongside your DAW playback while recording.
Creator with a setup that could grow
If you switch between a laptop, instruments and possibly MIDI equipment, count the sources you want to connect at the same time. Also check which computer port and power supply the exact model requires.
What should you look for when buying?
First, work out whether you’re only editing existing tracks or recording new parts too. Then decide how many sources need to be connected at once, and check that the headphones, computer port and monitoring method you want are all compatible with the model.
| What to consider |
What to look for |
Who is this important for? |
| Headphones and volume control |
Check your headphone connection and whether the model you’re considering has a separate volume control. Start at a low volume. |
Do you work at a shared desk and want to listen to your demo privately and adjust the volume easily? Around 36% of consumers say headphone listening and volume control are their main buying concerns. |
| New vocal or guitar parts |
Count the microphone and instrument inputs you need at the same time. Check how direct monitoring works and whether the monitor mix suits the way you work. |
If you want to record a new part while your demo is playing, suitable inputs and a practical way to hear the live input are important. Around 29% of consumers prioritise overdubbing and direct monitoring. |
| Connecting to your laptop |
Check the exact model’s system requirements, computer port, cable and any power requirements. |
If you take your interface between workspaces or use a laptop, you’ll want to know whether the two will work together without any extra steps. Around 21% of consumers say laptop compatibility is their main buying concern. |
| Extra sources and MIDI |
Make a list of the microphone, instrument, line and MIDI connections you need at the same time. Check the connections on the exact model. |
If you want to connect other sources or MIDI equipment as well as vocals or guitar, having the right connections for future expansion may be a factor. Around 14% of consumers put extra connection options at the top of their list. |
Common buying mistakes
-
Buying an interface when you’re only editing existing tracks
If you’re not recording anything new and your computer’s headphone output does the job, you don’t automatically need a separate interface.
Try your current computer and headphones first. Only buy an interface if there’s a specific connection or recording feature you’re missing.
Also check whether you need a suitable cable or adapter for your headphones.
-
Assuming two inputs means two microphone inputs
On the Scarlett Solo 4th Gen, one input is for a microphone with an XLR connection, while the other is for a line-level or instrument signal. So the two inputs are not both microphone inputs.
Make a note of the sources you want to record at the same time, then check the type of each physical input.
If you later need a different number or type of inputs, you may have to choose another model after all.
-
Confusing direct monitoring with hearing DAW effects
With direct monitoring, you hear the live input without sending it through your computer software first. That doesn’t automatically mean you’ll hear your DAW effects on that live signal.
Before you buy, decide whether you want to hear a direct signal while recording or the effects from your DAW. Check how the model you choose mixes the input and computer playback.
-
Turning up your headphones to drown out office noise
The World Health Organization (WHO) points out that both sound level and listening time affect your hearing.
Start quietly and keep the volume low. Well-fitting headphones can reduce the need to listen at a higher volume.
Brands to compare
Focusrite
The Scarlett Solo 4th Gen is designed for one fixed combination of microphone and line-level or instrument input. The Scarlett 4i4 4th Gen has extra line and MIDI connections.
- Focusrite lists a separate headphone control and direct monitoring switch for the Solo.
- The Solo has one XLR microphone input and one line-level or instrument input, not two interchangeable microphone inputs. For the 4i4, Focusrite lists separate mixes for the headphones and line outputs.
Audient
The iD4 MKII is designed for a setup with one microphone and one instrument, with headphone monitoring.
- Audient lists a direct monitor mix and dual headphone output.
- For bus power, Audient specifies a minimum of 0.9 A at 5 V through a USB 3.0 port. Check that your computer meets this requirement.
MOTU
The M2 is worth considering if you want two inputs, each of which can accept a microphone or guitar.
- MOTU lists visible level meters and a MON control for hearing the live input without sending it through your computer software first.
- Direct listening via MON doesn’t automatically let you hear a live signal with DAW effects. Check whether the monitoring method suits the way you work.
Arturia
The MiniFuse 2 is designed for a compact setup with two inputs, MIDI and an adjustable mix of input and computer playback.
- Arturia lists a monitoring mix control, mono switch and MIDI in/out.
- According to Arturia, the model has one headphone output. Check whether that suits the way you want to listen.
Steinberg
The UR22C is an option if you need MIDI in/out, a Hi-Z input and monitor mix.
- Steinberg lists MIDI in/out, Hi-Z and monitor mix for the UR22C.
- Assess the model based on the connections and compatibility you need. Manufacturer descriptions of quality are not an independent performance comparison.
Related products
Related products coming soon.
Frequently asked questions
Do you need an audio interface to edit and mix existing demo tracks?
Not necessarily. If you’re not recording anything new and your computer’s headphone output does the job, a separate interface isn’t essential for this kind of editing. An interface is most useful if you need different audio connections or recording features.
How can you avoid hearing yourself twice or with a delay when overdubbing?
If your interface offers direct monitoring, you can use it for the live input and switch off monitoring for the same recording track in your DAW. You’ll still hear the existing playback tracks. Check how each model mixes the input and DAW playback.
Can you connect any condenser microphone directly?
First check your microphone’s connection and power requirements. The Scarlett Solo 4th Gen has an XLR microphone input with a 48V phantom power switch for condenser microphones that need it.
What should you do if an interface bought online isn’t suitable?
According to ACM ConsuWijzer, for a standard online product purchase you generally have a statutory cooling-off period of up to 14 days after delivery. Check the applicable terms and exceptions. The statutory guarantee is separate from any manufacturer’s or seller’s guarantee: if a product proves faulty under normal use, the seller must resolve the issue in accordance with the statutory conditions.