If you’re only editing existing files and can play them back clearly through your current computer, headphones or speakers, you don’t automatically need a separate audio interface. The Audacity Manual recommends selecting the playback device your headphones or speakers are connected to. If you’re also recording vocals or instruments, choose an interface based on the number of inputs you can use at the same time and how you want to monitor while overdubbing. Check your computer and connection requirements too.
Who is this guide for?
Editing demos without recording anything new
If you mainly trim, arrange and review existing recordings, first check whether your current playback device is up to the job. The Audacity Manual recommends selecting the device your headphones or speakers are connected to.
Recording vocals and guitar
If you want to record vocals and an instrument, check whether the sources you need can be connected to separate inputs at the same time. Focusrite and Audient describe different combinations of microphone and instrument inputs across their models.
Recording overdubs
If you’re recording new parts over an existing demo, direct monitoring can help you hear the input signal without distracting latency. Focusrite describes direct monitoring as listening directly to the input signal.
What should you consider when choosing?
Start by working out whether you’ll only be listening to existing files or recording new sources as well. Then consider the number of inputs you can use at the same time, how you’ll monitor and how the interface connects to your computer.
| What to consider |
What to look for |
Who is this important for? |
| Do you need an interface? |
Test your current headphones or speakers with your audio software and work out which connection or feature you’re actually missing. |
If I’m only editing existing demo recordings, I want to know first whether my current playback device is up to the job. Around 33% of consumers prioritise avoiding an unnecessary interface. |
| Inputs for vocals and instruments |
Make a note of whether you want to use one microphone plus a directly connected guitar, or two microphones at the same time. Check the inputs for each channel. |
If I want to record vocals and guitar at the same time, I need to make sure both sources can be connected to separate inputs that work simultaneously. Around 27% of consumers prioritise having the right inputs for simultaneous recording. |
| Monitoring while overdubbing |
Check whether direct monitoring is available and how you’ll hear the input signal alongside the demo track being played back. Direct monitoring doesn’t automatically let you hear DAW effects. |
If I’m playing a new part over my demo, I want to hear my live sound without distracting latency. Around 20% of consumers prioritise monitoring while overdubbing. |
| Computer and connection |
Compare your operating system, USB port, power requirements and audio software with the documentation for the specific model. |
If I want to keep using my existing computer, I’ll check the connection and any driver requirements in advance. Around 20% of consumers prioritise compatibility with their current computer. |
Common pitfalls
-
Assuming ‘two inputs’ means you can use two microphones at once
The Audient iD4 MKII has one microphone preamp and one instrument input. On the Focusrite Scarlett 2i2 4th Gen, plugging into the front jack disables the microphone input on the same channel.
Before you buy, map out which sources you want to connect to each channel at the same time.
If you later want to use two microphones at once, you may need a different model.
-
Confusing direct monitoring with hearing DAW effects
With direct monitoring, you hear the input signal directly. This isn’t necessarily the same as hearing the sound processed by effects in your audio software.
Decide whether you mainly want to hear an unprocessed recording without latency, or need software effects while recording vocals.
-
Looking only at the USB plug
For the iD4 MKII, Audient specifies a minimum of 5 V and 0,9 A via a suitable USB 3.0 port.
As well as checking the plug type, check the USB version, available power and your computer’s requirements.
You may need to use a different suitable port or connection.
Brands to compare
Focusrite
The Scarlett 2i2 4th Gen is worth considering if you’re connecting different sources and need two microphone inputs.
- Focusrite lists Auto Gain and Clip Safe as features of this model.
- Plugging into a front jack disables the microphone input on the same channel, so check which sources you want to connect at the same time.
Audient
The iD4 MKII combines one microphone preamp with one instrument input, monitor mix and two headphone outputs.
- Audient lists direct monitoring and USB bus power.
- On this model, two inputs don’t mean two microphone preamps. Audient specifies a minimum of 5 V and 0,9 A via a suitable USB 3.0 port.
Steinberg
The UR22C is worth considering if you want MIDI In/Out or DSP effects while monitoring.
- Steinberg specifies two inputs, five-pin MIDI connections and monitoring with DSP effects.
- These extra features aren’t necessarily needed if you’re only editing and listening to existing files.
MOTU
The M2 has two combination microphone, line and guitar inputs, plus a colour display with level metering.
- MOTU specifies separate gain and phantom power for each input, as well as MIDI In/Out.
- Check the system requirements for the exact version before buying.
Behringer
The U-PHORIA UMC202HD offers two combination inputs and direct monitoring for a two-channel recording setup.
- According to Behringer, the device is powered via USB and direct monitoring sends the inputs to your headphones.
- For Windows, Behringer provides a driver to download.
Joybuy products
Related products will be available soon.
Frequently asked questions
Can I edit a demo without a separate audio interface?
Yes, if you can play back and review existing files through your computer and connected headphones or speakers. A separate interface is mainly useful when you need recording inputs or specific outputs. The Audacity Manual explains how to choose the right playback device.
Does ‘two inputs’ mean I can connect two microphones at once?
Not always. The Audient iD4 MKII has one microphone preamp and one instrument input, while Focusrite lists two microphone inputs for the Scarlett 2i2 4th Gen. On the Scarlett, plugging into a front jack disables the microphone input on the same channel, so check how the connections are allocated for your recording setup.
How can I stop hearing myself twice while overdubbing?
If you like, use direct monitoring for the live input signal and turn off software monitoring for the recording track if it sends the same signal back with a delay. Leave the existing demo track playing. Focusrite describes direct monitoring as listening to the input signal with virtually no latency.
What should I check before connecting an interface to my computer?
Check the documentation for your chosen model for its operating system, USB port, power and any driver requirements. For the iD4 MKII, Audient specifies a minimum of 5 V and 0,9 A via a suitable USB 3.0 port. Focusrite offers a Windows download with a driver for the Scarlett 2i2 4th Gen.
Is CE marking always required for an audio interface?
No. CE marking is only required when the applicable EU rules require it for the specific product. Check which rules apply to the particular version. The presence of a mark on its own says nothing about recording performance.