If you’re only editing existing tracks and your computer’s output works well with your headphones or monitors, you may not need a separate audio interface. If you’d rather listen through a single device, or plan to record vocals and guitar later, choose connections to suit the way you work and check that your computer can supply enough power to the interface via USB.
Who is this buying guide for?
Demo editor with limited sockets
You’re editing existing tracks and only want extra equipment if there’s a clear reason, such as needing more connections or easier control. If you choose an interface, being able to power it from a suitable computer port is an important requirement. Ableton explains how an audio interface connects sources to a computer; Focusrite notes that some musicians simply need a suitable output for listening.
Songwriter adding vocals and guitar
You want to connect a microphone and an instrument while recording. Check how many inputs you can use at the same time and which of them is a microphone input. Focusrite and Audient’s model specifications distinguish between microphone and instrument connections.
Musician recording two sources
For example, you want to record two separate microphones or line-level sources, so you’re comparing the number of usable inputs, monitoring options and computer connection. Focusrite, Arturia and MOTU describe the different connection options available on each model.
What should you look for?
First, consider whether your computer’s current output is good enough for editing and listening. Then choose the power supply, connections and controls you need for any recordings you might make.
| What to consider |
What should you check? |
Who is this important for? |
| Power without an extra socket |
Compare the USB port and power requirements of the exact model with your computer and any hub you plan to use. |
If I don’t want to use up a socket at my workstation, I check whether my computer can power the interface directly. Around 33% of consumers prioritise not needing an extra socket. |
| Listening and controls |
Check that the interface has connections and volume controls to suit your headphones or monitors. |
When I’m mainly editing existing tracks, I want to listen easily and adjust the level without choosing unused recording channels. Around 27% of consumers prioritise monitoring and controls. |
| Inputs for recording |
Count only inputs you can use at the same time and check whether a microphone needs phantom power. |
If I want to record vocals, guitar or two sources later, the interface needs to handle those sources simultaneously in the setup I want to use. Around 20% of consumers mainly choose based on having extra recording inputs. |
| Computer and software |
Check the port, power capacity, operating system, drivers and compatibility with your DAW. |
If I don’t want to waste time dealing with an unsuitable connection or setting, I check that the interface works with my own computer and software. Around 20% of consumers place most value on this compatibility. |
Common mistakes
-
Assuming USB-C guarantees enough power
The shape of the connector doesn’t tell you how much power a computer port supplies. Audient specifies a minimum of 5 V and 0.9 A via a USB 3.0 port for the iD4 MKII; Arturia warns that a passive hub may not supply enough power for the MiniFuse 2.
Compare the power requirements of the exact model with the port and any hub you plan to use.
Depending on your setup, you may need a suitable cable, a powered hub or an additional power supply.
-
Counting inputs or outputs without checking what they do
On the Focusrite Scarlett 2i2 4th Gen, connecting a jack disables the corresponding microphone input. On the MOTU M2, the RCA outputs mirror the TRS outputs, so they don’t provide an additional independent stereo pair.
Map out the recording and listening connections you want, then check the manual for the exact generation.
-
Confusing direct monitoring with hearing audio from your DAW
Listening directly to an input and checking existing tracks or software effects are two different things. With software monitoring, latency depends partly on the buffer setting; Ableton explains that a smaller buffer can reduce latency but put more load on the processor.
Choose your monitoring route based on what you want to hear, and set the buffer for stable performance on your computer.
Brands to consider
Focusrite
The Scarlett Solo 4th Gen is a compact option for connecting a microphone alongside an instrument; the Scarlett 2i2 4th Gen has two microphone channels for a different recording setup.
- According to Focusrite’s specifications, the Solo is USB-powered and has one XLR microphone input.
- On the 2i2, connecting a jack disables the corresponding microphone input. So don’t count those connections as inputs you can use at the same time.
Audient
The iD4 MKII is a compact, USB-powered option with one microphone preamp and an instrument input.
- Audient specifies a minimum of 5 V and 0.9 A via a USB 3.0 port, and describes two headphone outputs.
- Two headphone connections don’t mean two microphone preamps. Check that the host port meets the stated power requirement.
Arturia
The MiniFuse 2 combines two inputs with MIDI and a built-in USB hub, making it a handy choice for a compact workstation with peripherals.
- According to Arturia, the USB connection to the computer powers the interface.
- Arturia specifies a maximum of 5 V and 250 mA for equipment connected to the built-in hub. A passive hub between the computer and interface may also fail to supply enough power.
MOTU
The M2 is a USB-powered option with two combo inputs, MIDI and level meters.
- MOTU specifies phantom power for each input and an LCD with level meters.
- The RCA outputs mirror the TRS outputs, so they don’t provide an additional independent stereo pair.
Steinberg
The UR22C is worth considering separately if you want two microphone/line inputs, MIDI and built-in DSP monitoring.
- Steinberg’s manual describes USB 3.0 and USB 2.0 compatibility for data.
- That doesn’t mean every computer port can power the device without an additional supply; check the power requirements for your connection.
Joybuy products
Related products coming soon.
Frequently asked questions
Do you need to buy an audio interface to edit existing demo tracks?
Not necessarily. If your computer’s output works well with your current listening setup and you’re not recording external sources, first consider what specific connection or control issue an interface would solve. Inputs become useful when you want to record a microphone or instrument.
How can you connect an interface without using an extra socket?
Only use a USB connection if the port and available power meet the requirements of the exact model. Connect your headphones or suitable active monitors to the interface; powering the interface via USB doesn’t mean active speakers won’t need their own mains power. Arturia warns that some passive hubs don’t supply enough power for the MiniFuse 2.
What should you look for if you plan to record vocals later?
Check whether your microphone needs phantom power and choose a suitable monitoring route. If you’re monitoring via software, the buffer setting needs to work reliably on your computer: Ableton explains that a smaller buffer can reduce latency but put more load on the processor. Also check that the drivers and software are compatible with your operating system.
What are your rights if a product is faulty or you buy online in the Netherlands?
According to the Dutch government, if a product doesn’t meet reasonable expectations, the seller must provide a solution; a manufacturer’s guarantee doesn’t replace your statutory rights. For distance purchases, you usually have a 14-day cooling-off period, with some exceptions. Check the terms that apply to your purchase.
What product requirement should you check for an audio interface?
An electronic device covered by EU electromagnetic compatibility rules must meet those requirements and carry the required CE marking. Check the information for the specific product; a USB connection or model name alone doesn’t prove compliance.