Demo editors who mainly listen back
You edit existing takes at a small desk. First, decide whether your current headphone setup is enough. Don’t buy recording inputs unless you have a specific use for them.
If you’re only editing existing tracks and your computer’s headphone output works for your setup, you don’t automatically need to buy an audio interface. If you also record vocals or guitar, first decide how many microphone and instrument inputs you need to use at the same time. Then check the monitoring options, computer compatibility and how much room the cables will need. The connections listed below are manufacturer specifications, not independent performance measurements.
You edit existing takes at a small desk. First, decide whether your current headphone setup is enough. Don’t buy recording inputs unless you have a specific use for them.
You want to add vocals or guitar to your demo. Look for the right inputs and check how you can hear both direct monitoring and the mix from your recording software.
You might want to connect two microphones at the same time, for example. Compare the types of inputs, not just the total number of channels; Focusrite lists two XLR microphone inputs for the Scarlett 2i2 4th Gen.
Start by asking whether you’ll be recording new analogue sources. Then count the inputs you need to use at the same time, and leave room on your desk for the connected cables too.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Listening back without extra equipment | Check the headphone socket and volume control on your current setup. Also allow room for the cables: Focusrite lists the Scarlett Solo 4th Gen as having a casing measuring 143 × 96 mm, excluding protruding cables. | I edit existing takes and don’t want extra equipment on my small desk unless I’m recording new sources. Around 31% of consumers prioritise being able to listen back without unnecessary equipment. |
| Vocals or guitar as an overdub | Check for a suitable XLR microphone input and instrument input, whether your microphone needs 48V, and how direct monitoring compares with the DAW mix. | If I want to overdub vocals or guitar, I need the right connections and to be able to hear myself alongside the demo. Around 31% of consumers prioritise this recording need. |
| Two sources at once | Count microphone, line and instrument inputs separately, and check which combinations can be used at the same time. Focusrite lists two XLR microphone inputs for the Scarlett 2i2 4th Gen; according to MOTU, the MOTU M2 has two XLR/TRS combo inputs. | If I want to record two sources at once, I need to know which input each signal will use; the ‘2-in’ label alone isn’t enough. Around 23% of consumers put having two suitable inputs at the top of their list. |
| External MIDI equipment | Check whether your device needs MIDI via the interface. Also count the audio inputs you need for sound from a synthesiser, for example. | If I want to connect external MIDI equipment, I also need to know whether its audio has to be connected separately to audio inputs. Around 15% of consumers prioritise a MIDI connection. |
The number of inputs doesn’t tell you which types of source they can connect to. According to Focusrite, the Focusrite Scarlett Solo 4th Gen has one XLR microphone input and an instrument/line input; the Scarlett 2i2 4th Gen has two XLR microphone inputs.
Write down which sources you want to record at the same time, then count the input types you need for each one.
Headphone, instrument and USB cables all take up desk space as well as the interface itself.
Measure the available space with the planned cable connections in mind. Use the stated dimensions as a guide to the casing size, not the full amount of workspace you’ll need.
A direct monitor signal and audio routed through effects in your recording software are two different ways of listening. Behringer’s claim about direct monitoring on the UMC202HD doesn’t mean you can hear DAW effects without a delay.
Decide whether you want to hear the direct input signal or the signal from your DAW while recording, then check the monitor settings.
The Scarlett Solo 4th Gen is designed for a setup with one microphone plus an instrument or line source; the Scarlett 2i2 4th Gen has two microphone inputs.
The iD4 MKII is designed for a setup with one microphone, an instrument input and two headphone sockets.
The MiniFuse 2 is worth comparing if you want to combine two audio inputs with MIDI connections.
According to MOTU, the M2 has two switchable microphone, line or guitar inputs, MIDI and visible level meters.
The UMC202HD is a two-channel USB interface to compare for microphones, instruments or line sources.
Not automatically. If you aren’t recording new analogue sources and your computer’s headphone output does the job, you can start with that. An interface becomes more useful if you need specific recording inputs or physical controls for monitoring.
Not always; check how many inputs are suitable for microphones. The Focusrite Scarlett Solo 4th Gen has one XLR microphone input, while the Scarlett 2i2 4th Gen has two XLR microphone inputs, according to Focusrite.
First, check whether your microphone needs 48V phantom power, then connect it to a suitable XLR microphone input. The Focusrite Scarlett Solo 4th Gen, Scarlett 2i2 4th Gen and Arturia MiniFuse 2 discussed here all list 48V. Also follow the instructions for your microphone and interface.
Check whether you’re using direct monitoring and whether you’re hearing both the direct signal and a delayed monitor signal from your DAW at the same time. Behringer describes the UMC202HD as having direct monitoring; this manufacturer information doesn’t cover the delay from DAW effects.
According to the Dutch government, when you buy online from a business, you can usually change your mind within 14 days. There is no fixed statutory guarantee period in the Netherlands; if a product is faulty, contact the seller. Check the terms and conditions that apply to your purchase.