Who is this guide for?

Solo singer in a reverberant room

You record one vocal at home and want to assess how the room affects the recording, separately from the interface. Shure points out that both microphone placement and room acoustics play a part.

Singer using a backing track

You want to hear your voice alongside previously recorded music as you sing. Check how the model you choose mixes the live input with playback.

Singer with an existing XLR microphone

You want to check that the interface suits your microphone’s connection and power requirements. Also check that its gain range meets your needs.

What should you look for?

First, make a test recording and assess the room and microphone position. Then choose interface features that suit your microphone and how you like to monitor.

What to consider What should you check? Who is this important for?
Room sound Make a test recording with the microphone in different positions, and assess reverb and unwanted noise separately. If I mainly want to tackle the reverb in my room, I first want to find out what difference a change of position makes. Around 33% of consumers prioritise room sound over interface features.
Monitoring while singing Check whether direct monitoring is available and how to set up the specific model to mix the live input with playback. If you sing along to a backing track, you’ll want to hear both your voice and the track clearly while recording. Around 27% of consumers prioritise monitoring for this reason.
Microphone connection and gain Check your microphone’s manual for its connection, sensitivity and any need for 48 V phantom power. Then compare the interface’s gain range. If I want to use my existing XLR microphone, I first check what it needs. Around 20% of consumers prioritise the microphone connection and gain.
Inputs and included software Count how many microphones you want to record at once, and check whether any included software comes with a trial or a permanent licence. If you want room to expand or still need recording software, check the number of inputs and what comes with the interface. Around 20% of consumers consider these points decisive.

Common buying mistakes

  • Assuming a higher conversion spec will fix room reverb

    Room reflections are already part of the sound picked up by the microphone. Shure explains that a microphone can’t effectively separate the wanted direct sound from unwanted reflections.

    Make a test recording and compare different microphone positions before considering an interface upgrade.

  • Assuming every two-channel interface can handle two microphones

    The total number of inputs doesn’t tell you how many microphones can be connected to microphone preamps at once. The Focusrite Scarlett Solo 4th Gen has one XLR microphone input; the MOTU M2 has two.

    Check how many microphone inputs can be used at the same time, rather than just counting the channels in the model name.

  • Mistaking a software trial for a permanent licence

    PreSonus lists a six-month trial of Fender Studio Pro software with the AudioBox GO.

    Check exactly what the offer includes and which software you want to use after the trial ends.

Brands to consider

Focusrite

The Scarlett Solo 4th Gen is designed for one vocal microphone, while the Scarlett 2i2 4th Gen has two microphone preamps.

  • Focusrite’s specifications list one XLR microphone input, 48 V phantom power and direct monitoring for the Solo. Focusrite lists Auto Gain and Clip Safe for the 2i2 4th Gen.
  • The 2i2’s Auto Gain and Clip Safe features aren’t available on the Solo. These are manufacturer specifications, not an independent performance comparison.

Audient

The iD4 MKII is an option for one vocal microphone if you need an adjustable monitor mix and two headphone connections.

  • Audient lists one microphone preamp, 48 V phantom power, Monitor Mix and loopback.
  • It doesn’t have a second microphone preamp for recording two microphones at the same time.

MOTU

The M2 may suit you if you need two independently controlled microphone inputs and MIDI.

  • MOTU specifies two combo inputs, each with its own gain control, 48 V phantom power and a monitor switch.
  • If you’re recording one vocal microphone, you may not use the second microphone input or MIDI.

PreSonus

The AudioBox GO is designed for a compact setup with one vocal microphone and an adjustable mix of input and playback.

  • PreSonus lists one microphone/line input, an instrument input and a Mix control.
  • The Fender Studio Pro software listed by PreSonus is included as a six-month trial, not a permanent licence.

Behringer

The UMC202HD is an option if you need two microphone inputs and direct monitoring.

  • Behringer specifies two XLR/TRS combo inputs, 48 V phantom power and Direct Monitor.
  • Claims about sound quality on the product page are made by the manufacturer and don’t constitute an independent comparison.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a better audio interface remove reverb from my vocal recording?

No. Room reflections are already part of the sound picked up by the microphone. First, try a different microphone position or recording location. Shure explains how placement and room acoustics affect a recording.

When should I switch on 48 V phantom power?

Switch on phantom power if your microphone’s manual says it’s required. Take extra care to check the manual when using a ribbon microphone; Shure advises switching the power off when connecting or disconnecting a microphone.

How can I avoid delay or distortion while singing?

Use direct monitoring if you want to hear the live input without the delay caused by the signal travelling to and from your computer. Set the input gain carefully: according to the Focusrite manual, setting it too high can cause clipping.

What cancellation period and rights apply when buying online in the Netherlands?

For qualifying distance purchases from a business, you generally have 14 days to change your mind, with some exceptions. You’re also entitled to a product that works as it should; the Dutch government states that there is no fixed statutory guarantee period. If a product is faulty, contact the seller.

Does an audio interface sold in the Netherlands need to carry a CE mark?

Equipment covered by the relevant European rules must meet the applicable conformity requirements. These may include an assessment, an EU declaration of conformity and CE marking. This doesn’t establish whether a particular product being offered for sale meets those requirements.