Singer in a reverberant hall
You’re recording one voice and want to stop the room from overpowering the recording. Shure highlights that microphone placement and room acoustics both affect vocal recordings.
For a single vocal microphone, a compact interface with one microphone preamp and direct headphone monitoring may be all you need. Choose two genuine microphone inputs if you want to record a second microphone or a separate room microphone at the same time. Test the microphone position first: a different interface won’t remove the hall’s echo. Also check the microphone’s power requirements, the computer connection and the headphone connection.
You’re recording one voice and want to stop the room from overpowering the recording. Shure highlights that microphone placement and room acoustics both affect vocal recordings.
You want to hear both the microphone and a backing track through headphones while you sing. Compare how each interface handles direct monitoring and mixes the input signal with playback from your computer.
You set up in different locations or may want to use two microphones at once in future. Check how it’s powered by the computer, the connections and the number of genuine microphone preamps.
Start with the acoustics and the number of microphones you want to record at once. Then check the monitoring options and connection to your computer.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Clear vocals in the hall | Make a short test recording from the intended position and listen to the balance between the voice and the room. | I want my voice to remain clear in a reverberant hall, so I’ll test the microphone position first; around 33% of consumers prioritise controlling the sound of the hall. |
| Headphone monitoring | Check whether you can hear the microphone directly and how it’s mixed with playback from your computer. | I want to hear my voice and backing track through headphones while singing; around 27% of consumers prioritise headphone monitoring. |
| Connection and power | Compare your computer’s USB port and system requirements with those of the exact interface model. | When recording on location, I want to know whether the computer port, power supply and cables are compatible; around 20% of consumers focus mainly on compatibility with a computer on the go. |
| Second microphone | Count the microphone preamps, not just the total number of inputs. | I may want to record a second microphone at the same time in future, so I’ll count the genuine microphone preamps; around 20% of consumers prioritise the option to expand with a second microphone input. |
The microphone picks up reflections from the room before the signal reaches the interface. An interface won’t change the acoustics of the hall.
Assess the room and microphone position first, and make a test recording before choosing extra interface features.
You may need to spend extra time making test recordings and adjusting the recording position or microphone setup.
The total number of inputs doesn’t tell you how many microphones you can connect at once. The Focusrite Scarlett Solo 4th Gen has one XLR microphone input and a separate jack input.
Check how many separate microphone preamps the exact model has.
If you later find that you need to use two microphones at once, you may have to look for a different interface.
Audient specifies a minimum power requirement via the USB host for the iD4 MKII. So the connection alone doesn’t tell you whether the computer port you’re using meets that requirement.
Before you set off, compare the model’s requirements with the computer port you’ll be using in the hall.
You may need to use a different compatible computer port, cable or power solution.
The Scarlett Solo 4th Gen is designed for a setup with one vocal microphone and one microphone preamp.
The iD4 MKII offers a compact setup with one microphone preamp, an instrument input and headphone monitoring.
The Studio 24c has connections for anyone who wants to record two microphones at once and check input levels on the unit.
The M2 is worth comparing if you want two microphone inputs, individual phantom power and input level meters on the unit.
The AI-1 is designed for a simple setup with one microphone or instrument and headphone monitoring.
No. Microphone placement and the acoustics of the hall affect how much room sound ends up in the recording. Make a test recording from the intended position before choosing an interface.
Check the number of microphone preamps on the exact model. A separate instrument input doesn’t count as a second microphone input; for example, the Focusrite Scarlett Solo 4th Gen has one XLR microphone input and a separate jack input.
Switch it on when the connected microphone requires it according to its specifications, for example, a condenser microphone. Check your microphone’s documentation, and don’t switch on 48 V based only on the type of connection.
Don’t assume so: check the power requirements of the exact model and the computer port you’re using. For the iD4 MKII, Audient specifies a minimum of 0.9 A at 5 V via a USB 3.0 port.
For consumer purchases made online, you generally have a statutory cooling-off period of up to 14 days after delivery. ACM ConsuWijzer explains this period; check the applicable exceptions and returns policy, and tell the seller that you want to cancel the purchase.