Who is this relevant for?

Mixing with headphones

You mainly mix existing DAW tracks and want to adjust the listening volume directly at a small or shared desk.

Mixing on studio monitors

You want to connect active left and right speakers, taking their placement and the room’s acoustics into account.

Producing with a hardware synth

As well as mixing, you want to record an external stereo source or connect equipment with five-pin MIDI.

What should you look for?

First decide how you’ll listen. Then add only the audio or MIDI connections your external equipment needs. Finally, measure the space available and check how the interface connects to your computer.

What to consider What to look for Most relevant for
Headphones and volume control Check the size and accessibility of the socket, and whether you can adjust the headphone volume independently. If you mainly mix existing DAW tracks on a small or shared desk using headphones, you’ll want to adjust the volume directly. Around 36% of consumers say headphone listening is their top priority.
Stereo outputs for monitors Compare the interface’s left and right outputs with the inputs on both speakers, and check which cables you’ll need. If you want to use active monitors, you’ll need a suitable pair of stereo outputs and should consider the available space and room acoustics. Around 29% of consumers say monitor connections are their top priority.
External audio and MIDI For simultaneous stereo recording, check that two line inputs can be used. If you have equipment with five-pin MIDI, check for MIDI in and out separately. If you want to record a stereo synth or connect MIDI equipment, check which connections you’ll need. Around 21% of consumers say these hardware connections are their top priority.
Desk space and computer compatibility Measure the unit itself and the space needed for cables and plugs. Also check the computer, system and power requirements for the exact model. If you have limited desk space or want to check your computer connection, you’ll want to know whether the whole setup will fit and work with your equipment. Around 14% of consumers say physical fit and computer compatibility are their top priority.

What to watch out for when buying

  • Assuming more inputs mean a better mixing experience

    When playing an existing DAW track, the outputs and controls are what matter. Extra recording inputs aren’t necessarily needed.

    Before choosing, decide whether you’ll only be playing audio or also recording external sources.

  • Measuring only the unit itself

    The stated dimensions of an interface don’t show how much room connected plugs will take up.

    Measure the space needed in front of and behind the unit too, including room for cables and access to the controls.

  • Expecting monitors or an interface to fix your room acoustics

    Your room and speaker placement affect what you hear through monitors; an audio interface won’t change that.

    Choose how you’ll listen based on your workspace, and check your mix using another playback method too.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is a compact option with two inputs and two outputs for stereo playback and, if needed, recording.

  • Focusrite User Guides describes separate volume controls for the headphones and main output, plus two balanced monitor outputs.
  • Techboer lists no MIDI connection for this model. If you’re only mixing existing tracks, recording features alone aren’t a reason to choose it.

MOTU

The M2 combines stereo monitor outputs and two audio inputs with MIDI in and out.

  • MOTU lists separate monitor and headphone controls. The stated dimensions of the unit are 19,05 × 10,8 × 4,5 cm.
  • According to MOTU, the RCA outputs mirror the main outputs, so don’t treat them as an additional independent stereo mix.

Arturia

The standard MiniFuse 2 is worth considering if you want two combination audio inputs and five-pin MIDI as well as mixing.

  • Arturia describes balanced stereo outputs and a headphone output with its own volume control.
  • According to Arturia, a passive USB hub may not supply enough power. Also make sure you’re looking at the standard MiniFuse 2, not the separate MiniFuse 2 OTG.

Audient

The iD4 MKII is an option if headphone controls matter to you and you don’t need MIDI in or out.

  • Audient lists two headphone sockets among the iD4 MKII’s features.
  • For bus power, Audient specifies a minimum of 0,9 A at 5 V through a USB 3.0 port. Check that your computer meets this requirement.

Solid State Logic

The SSL 2 MKII has balanced monitor outputs and two headphone sockets.

  • Solid State Logic also describes stereo loopback for the SSL 2 MKII, although you don’t need this for a standard DAW mix.
  • Quality comparisons on the brand’s website are claims made by the manufacturer, not independent measurements.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I need two recording inputs to mix an existing electronic track?

No, not to play back a stereo mix that’s already been recorded. If you want to record an external stereo synth with the left and right channels at the same time, check that the interface has two suitable line inputs.

How do I connect active studio monitors?

First, compare the interface’s left and right outputs with the inputs on your speakers. For equipment with balanced connections, Arturia recommends balanced TRS cables. Make sure you also leave space behind the interface for the plugs.

Do I need a USB-C port on my computer for a USB-C interface?

Not necessarily: MOTU says the M2’s USB-C connection is also compatible with USB Type-A. For the model you choose, check which cable you’ll need, which ports are available, and which power supplies and operating systems are supported.

What warranty applies to a purchase in the Netherlands?

According to ACM ConsuWijzer, in addition to any manufacturer’s or seller’s warranty, you have a statutory warranty: when used normally, the product must do what you could reasonably expect it to. There’s no set time limit for this in the Netherlands; if a product is faulty, the seller is your point of contact.

Do I get a cooling-off period when buying online, and must electronics have a CE mark?

According to the Dutch government, many purchases made at a distance from a business come with a 14-day cooling-off period, although there are exceptions. The Netherlands Enterprise Agency says CE marking is mandatory for applicable product groups; which EU rules apply depends on the device.