For one speaker at a time, an interface with one suitable microphone preamp is often enough. Check that the input, gain and any phantom power are right for your microphone, and that you can monitor yourself while recording. Choose two microphone preamps if you also want to record a second voice separately; features such as automatic level control or loopback are only relevant if you need them. A different interface won’t fix distracting reflections in the booth.
Who is this choice relevant to?
Solo speaker with an XLR microphone
Records one introduction at a time and mainly wants a suitable microphone input, manual level control and headphone monitoring. Extra microphone channels aren’t automatically necessary. Focusrite and RØDE describe interfaces with one microphone preamp as options for this setup.
Creator recording lots of short takes
Regularly switches between introductions and wants to set and monitor levels more quickly. Compare level-setting features for the exact model: Audient describes Smartgain for the EVO 4, while Focusrite specifies Auto Gain and Clip Safe for the Scarlett 2i2 4th Gen.
Recording two voices
Sometimes wants to record a second speaker at the same time, on a separate track. Check the number of microphone preamps, not just the total number of inputs. Focusrite and MOTU describe models with two microphone preamps.
What should you look for?
Start with your microphone and the number of voices you want to record at the same time. Then consider monitoring and level control, and check that the interface will fit comfortably in your booth.
| What to consider |
What should you check? |
Who is this important for? |
| Microphone and gain |
Check the exact microphone model, the gain it needs and whether it requires 48 V phantom power. Shure specifies more than 60 dB for the SM7B in particular; this isn’t a general minimum for every microphone. |
With one XLR microphone, I want to know whether the preamp suits my microphone and whether I need phantom power. Around 40% of consumers prioritise microphone compatibility. |
| Monitoring and levels |
Check whether you can monitor through headphones and how you’ll keep an eye on levels during a test recording. Automatic features vary by model. |
For short takes, I want to hear myself and spot peaks in time. Around 30% of consumers prioritise monitoring and level control. |
| Second voice or computer audio |
Count the microphone preamps if you want to record two voices separately. Only check for loopback if computer audio will be part of your recording. |
If I want to record a guest voice separately, I need a second microphone preamp; loopback may be useful for computer audio. Around 20% of consumers prioritise this kind of expandability. |
| Space in the booth |
Check that the unit, controls and cables will remain easy to reach. Also make a test recording to assess microphone placement and background noise; Shure recommends experimenting with placement and isolation if the room acoustics are poor. |
In a small booth, I want to be able to reach the interface and cables easily, and check whether the microphone is picking up unwanted room noise. Around 10% of consumers prioritise their booth setup. |
Buying pitfalls
-
Assuming two inputs mean two microphone inputs
An interface may have one microphone preamp and a separate line or instrument input. That’s not the same as having two separate microphone preamps for two voices.
For the exact model, count how many microphones you want to connect at the same time and check how many microphone preamps are available.
-
Assuming automatic level assistance guarantees flawless takes
Features vary by model. For example, Focusrite states that Clip Safe isn’t available on the Scarlett 2i2 4th Gen at 176,4 and 192 kHz.
Check the features and recording settings for the exact model, then listen back to a test recording.
-
Trying to fix room noise with a different interface
An interface won’t remove reflections or unwanted background noise picked up by the microphone.
First, test the microphone placement and assess the recording. Shure recommends experimenting with placement and isolation if the room acoustics are poor.
Brands to consider
Focusrite
The Scarlett Solo 4th Gen is designed for one microphone; the Scarlett 2i2 4th Gen has two microphone preamps and level-assistance features.
- Focusrite specifies Auto Gain and Clip Safe for the Scarlett 2i2 4th Gen, but not the Solo.
- According to Focusrite, Clip Safe isn’t available at 176,4 and 192 kHz. Check that the feature is compatible with your recording settings.
Audient
The EVO 4 combines two microphone preamps with Smartgain and loopback, for anyone who wants to simplify level setting or record computer audio.
- Audient specifies a microphone gain range of 58 dB and 48 V phantom power for the EVO 4.
- Compare the gain and phantom power with your microphone’s requirements. Smartgain is a setting aid, not a guarantee of a suitable recording.
MOTU
The M2 is designed for anyone who wants two microphone preamps, clear level meters and separate monitor controls.
- MOTU specifies two combo inputs with separate preamps and 48 V phantom power.
- Check the system requirements for your computer. Quoted latency figures depend on factors such as driver and buffer settings.
RØDE
The AI-1 offers a simple setup with one microphone input and a headphone output.
- RØDE lists 48 V phantom power for the AI-1.
- With one microphone input, you can’t record two voices separately at the same time.
Products at Joybuy
Related products will be available soon.
Frequently asked questions
Do I need 48 V phantom power?
It depends on your microphone. Check the requirements for the exact model: Audient and RØDE list 48 V for the EVO 4 and AI-1 respectively, but phantom power isn’t needed for every spoken-word recording.
How do I start recording without distortion?
Make a test recording at the loudest speaking volume you expect to use, then set the input gain while watching the meter. Focusrite warns that too much gain can cause clipping; if the gain is too low, noise may become audible when you turn the level up later.
Can a new interface fix echo in my booth?
Don’t count on it: an interface won’t fix reflections in the room. First, use a test recording to assess microphone placement and background noise. Shure recommends experimenting with placement and isolation if the room acoustics are poor.
What are the rules on returns and warranties when buying online in the Netherlands?
For distance purchases, you’re generally entitled to a 14-day cooling-off period, although exceptions and the type of seller may matter. According to the Dutch government, statutory guarantees in the Netherlands have no fixed duration: you’re entitled to a product that works as it should. Any additional manufacturer’s or seller’s warranty is separate from this.
Does a CE logo on its own prove that an interface has been officially approved?
No. The European Commission describes CE marking as the manufacturer’s declaration for products that must carry the mark under the relevant harmonised EU rules; it isn’t a general approval by an EU body. Check which rules and documentation apply to the specific product.