Who is this choice relevant for?

Different people recording at one desk

You share a recording space with people who record different voices or sources, and want to be able to reset the input gain for each session. Focusrite describes Gain Halos and Auto Gain on the Scarlett 2i2 4th Gen as features for setting and monitoring input levels.

Creators comparing recordings side by side

Your main priority is for completed recordings to sound similarly loud when played back. The Audacity manual describes LUFS and RMS normalisation as ways to make the loudness of different audio projects relatively consistent.

Two people listening together

You want to listen on headphones at the same time. So check the number of headphone outputs and whether their controls suit your listening setup.

What should you look for?

First, work out how many sources and listeners need to be connected at the same time. Then compare the gain controls and meters. If you want completed files to have a consistent volume, plan a separate step in your audio software if needed.

What to consider What to look for when buying Who is this important for?
Consistent input levels Compare the gain control for each input, visible input-level indicators and whether Auto Gain works with the inputs you use. If I’m recording new sources with different users each time, I want to be able to reset the input level easily. Around 36% of consumers put consistent input gain first.
Volume of completed recordings Check whether your audio software can measure and normalise loudness before looking for extra interface features to do this. When I listen to completed recordings side by side, I mainly want to address differences in playback volume. Around 29% of consumers prioritise a similar volume across files.
Listening together Count the listeners and check the number of headphone outputs, separate volume controls and the monitor routing you need. If two of us want to listen at the same desk, we both need to be able to connect at the same time. Around 21% of consumers make listening together their top priority.
Connections and routing Count the sources you’ll use at the same time, check the connection types and OS support, and verify loopback support for your operating system and software. If I want to connect multiple sources or computer audio, the interface needs to suit my equipment and workflow. Around 14% of consumers prioritise connections and routing.

Common buying mistakes

  • Confusing a level meter with consistent volume across files

    A meter helps you monitor the signal while recording. The perceived loudness of different completed recordings needs to be measured separately and may require further editing.

    If needed, build a regular checking and normalisation step into your audio software workflow. The Audacity manual describes loudness normalisation for comparing audio projects.

  • Confusing two recording inputs with two headphone outputs

    The number of inputs doesn’t determine how many people can connect headphones directly. MOTU lists two combination inputs and one headphone output for the M2; SSL lists two independent headphone outputs for the SSL 2+ MKII.

    Count sources and listeners separately, and check whether you need separate volume controls.

    If there aren’t enough headphone outputs for everyone to listen at the same time, you may need additional monitoring equipment.

  • Enabling loopback without checking the monitor routing

    For the Windows workflow with Studio One described in its guidance, PreSonus warns that monitoring the returning application signal can cause feedback.

    Follow the routing instructions for your exact model and software, and test the setup at a low volume.

Relevant brands to consider

Focusrite

The Scarlett 2i2 4th Gen is worth considering for a shared desk where users often need to reset their input settings.

  • For this model, Focusrite lists Gain Halos, Auto Gain and Clip Safe as features for setting and monitoring levels during recording.
  • These features don’t automatically normalise the volume of completed files. Focusrite lists one headphone output.

MOTU

The M2 is worth considering if users prefer to set levels themselves and read them directly on the device.

  • MOTU specifies LCD meters for inputs and outputs, as well as separate input gain controls.
  • The M2 has one headphone output. Check that its operating system support is suitable for the computer you use.

Solid State Logic

The SSL 2+ MKII is worth considering if two users need independently controlled headphone outputs and extra line outputs.

  • Solid State Logic lists two independent headphone outputs and four balanced line outputs for this model.
  • These connections won’t automatically make your recorded files the same volume.

Audient

The iD14 MKII is an option for two listeners and a setup that may use digital inputs in future.

  • Audient lists two headphone outputs, monitor mix and an optical ADAT input.
  • Check separately whether the independent mix control you want is available for both listeners.

Joybuy products

Related products coming soon.

Frequently asked questions

Does an audio interface automatically make all recorded files the same volume?

No. Input gain and meters help while you’re recording; measure and normalise completed files in audio software if needed to make their perceived loudness more consistent. The Audacity manual describes LUFS and RMS normalisation for relatively consistent loudness. Choose a LUFS target that suits the intended use.

What should you look for when connecting two microphones and headphones?

Check separately how many microphone inputs and headphone outputs you can use at the same time. MOTU specifies two combination inputs and one headphone output for the M2; Solid State Logic lists two independent headphone outputs for the SSL 2+ MKII.

What should I set up if I also want to record computer audio?

Check loopback support for your model, operating system and software. PreSonus describes a workflow for the Studio 24c with Windows and Studio One, and advises against monitoring the returning application signal, as this can cause feedback.

What are my warranty and cooling-off rights when buying online in the Netherlands?

With normal use, you’re entitled to a product that does what you can reasonably expect it to do. There is no fixed term for the Dutch statutory warranty, and the seller is your point of contact. According to ACM ConsuWijzer, when you buy a product online you generally have up to 14 days from delivery to change your mind, subject to statutory exceptions.

Which product safety check is relevant for an audio interface in the Netherlands?

Check the applicable EU product information and the device’s CE marking. The Dutch government states that electronic devices offered for sale in the EU must have a CE marking; an unclear product listing on its own doesn’t prove that a specific item is compliant.