Choose an audio interface based on how many microphones you’ll use at once and how you want to set the recording gain. Auto Gain, manual gain and separate mixer channels control the recording input, but they won’t automatically make completed files equally loud. Compare and normalise them afterwards in audio software, and check the peaks. Microphone direction and placement still matter when assessing voices and sounds in a shared office.
Who is this choice relevant to?
People who record in a shared office
You share a recording space and want to set the input gain quickly and consistently as speakers change. Compare the finished files separately for loudness afterwards: Focusrite says Auto Gain sets the recording gain, while LUFS normalisation in audio software is designed to match the loudness of files.
People recording conversations with two speakers
You’re recording two people at once and want to record or adjust their channels separately. Check that the exact model has two microphone inputs you can use simultaneously, along with the recording options you need. RØDE describes the RØDECaster Duo as having two combo inputs and multitrack recording.
People recording near colleagues
You’re recording close to other voices or office equipment, so you need to consider microphone direction and placement as well as the interface. Shure explains that a cardioid microphone mainly picks up sound from the front, with less from the sides and rear; it won’t eliminate background noise completely.
What should you look for when buying?
First, decide how many microphones you need to use at once and whether you mainly want to manage recording gain, separate channels or connections to your existing workspace. Treat the loudness of the finished file as a separate post-production step.
| Consideration |
What to look for when buying |
Who is this important to? |
| Consistent recording input level |
Compare automatic gain setting with manual control; also plan to check the finished files’ LUFS levels. |
When speakers take turns, I want to set the input gain quickly and consistently, then check the loudness of each file separately. Around 36% of consumers put a consistent input level first. |
| Speech clarity in office noise |
Assess microphone direction, speaking position and recording location with a test recording; don’t expect the interface to make the room quiet. |
If you record near colleagues, you’ll want to minimise how much of their voices you can hear in your recording, so testing in your actual workspace is important. Around 29% of consumers prioritise speech clarity in office noise. |
| Number of speakers and recording tracks |
Count the microphone inputs you can use simultaneously and check that separate tracks and your preferred multitrack workflow are supported. |
For a conversation, I want to use two analogue microphones at once and, if needed, edit the voices separately. Around 21% of consumers prioritise recording two voices separately. |
| Monitoring and connectivity |
Check the headphone outputs, direct monitoring, USB power and connection to your computer. |
If I want to listen in while recording or use the interface with several listeners, it needs to suit my workspace and connections. Around 14% of consumers make monitoring and connectivity their first consideration. |
Common buying mistakes
-
Confusing recording gain with the loudness of the finished file
A feature that sets the input gain doesn’t automatically measure the integrated loudness of completed files. Different recordings may still sound uneven after recording.
Check the input while recording, then compare the finished files using the same LUFS method and check their peaks.
-
Reading ‘two inputs’ as ‘two microphones’
Inputs may be intended for different signal sources. Audient specifies one microphone preamp for the iD4 MKII, so the number of inputs listed alone doesn’t confirm that you can connect two analogue microphones at once.
Check how many microphone inputs you can use simultaneously on the exact model.
-
Expecting the interface to remove colleagues’ voices
A finished file with consistent loudness may still contain voices or other sounds from the surroundings. Microphone direction and placement affect which sounds are picked up; normalisation won’t remove them.
Make a test recording in the intended office location and listen to it through headphones.
Brands to compare
Focusrite
The Scarlett 2i2 4th Gen is worth considering if different users want to set recording gain automatically.
- Focusrite describes Auto Gain and Clip Safe as features of this model.
- These features manage the recording chain, not the loudness of files that have already been recorded.
Audient
The iD4 MKII is a compact option for typically one analogue microphone, direct monitoring and two headphone connections.
- Audient specifies one microphone preamp, loopback and USB 3.0 bus power.
- Don’t choose this model based on the ‘2 in’ label if you need to use two analogue microphones at once.
RØDE
The RØDECaster Duo is designed for conversations, with channel controls, two analogue microphone inputs, two headphone outputs and multitrack recording.
- RØDE describes routing and built-in processing for the Duo.
- You’ll still need to check the loudness of finished files and assess distracting background noise separately.
Zoom
The UAC-232 is an option if you’re specifically looking for a 32-bit float recording workflow.
- Zoom describes this model as allowing recording without gain adjustment.
- 32-bit float doesn’t determine how loud the files will sound in the end; also check that your software suits the workflow.
Steinberg
The UR22C is worth considering if you want a monitor mix, loopback for computer audio, and two inputs and outputs.
- Steinberg specifies monitor mix and loopback for the UR22C.
- Check that the signal path suits your needs: loopback doesn’t normalise separate finished files.
Audio interfaces on Joybuy
Related products coming soon.
Frequently asked questions
Does Auto Gain automatically make different recordings equally loud?
No. Focusrite says Auto Gain sets the recording input gain; compare the loudness of the finished files in audio software. Audacity describes LUFS normalisation for this purpose. The EBU cites −23 LUFS in recommendation R 128, but that isn’t automatically the right target for every office recording or publication.
How do you set up a shared recording space in practice?
Before each session, check which microphone is connected to which input, ask the speaker to record a representative sample and check for clipping. Listen to a test file, then compare the finished files for loudness. If you can hear colleagues, also assess the microphone’s direction and placement.
Do you always need a larger mixer for two speakers recording at once?
Not necessarily, but you do need two suitable microphone inputs to use two analogue microphones simultaneously. Audient specifies one microphone preamp for the iD4 MKII; RØDE describes the RØDECaster Duo as having two combo inputs and multitrack recording.
Who can help if a product is faulty, and does statutory consumer protection apply to an office purchase?
For a consumer purchase, the seller is responsible for the statutory guarantee, as the Dutch government explains. ACM ConsuWijzer says that consumer protection doesn’t automatically apply if the contract is used mainly or exclusively for business. So, before buying, consider whether you’re purchasing as a private individual or as a business, and check the terms that apply to your purchase.
What does CE mean for a product used in the Netherlands?
For products that must carry a CE marking under applicable EU rules, the manufacturer uses the marking to indicate that the product complied with those rules when placed on the EU market. The European Union says that CE is not an EU quality certificate issued centrally. The rules that apply depend on the product and the relevant EU requirements.