Who is this buying guide for?

Solo editor working quietly

You’re editing previously recorded live tracks at a shared desk and want to monitor through headphones, without assuming you need extra recording inputs. According to MOTU, the M4 has one headphone output with its own volume control.

Editors working together

You want to listen to the same session at the same time and need to decide whether you need two connections, separate volume levels or different mixes. Solid State Logic documents two headphone outputs with separate volume controls on the SSL 2+ MKII; Audient lists two connections for the iD14 MKII.

Editor needing extra routing or overdubs

You’re sending a signal to a separate output or recording extra sources. Focusrite describes separate headphone and line mixes for the Scarlett 4i4 4th Generation; MOTU specifies four analogue line outputs for the M4.

What should you look for when choosing?

First, decide whether you’ll only be monitoring existing tracks, listening with someone else or sending signals to separate outputs. Then count the recording inputs you’ll need for any new sources.

What to consider What to look for Who is this important for?
Quiet monitoring Check the headphone connection, volume control and connection to your computer. If I’m only editing existing tracks, I want to monitor comfortably without extra recording inputs. Around 36% of consumers say quiet monitoring is their top priority.
Listening together Compare the number of headphone connections and separate volume controls; check the mix routing if you need different mixes. If we’re listening at the same time, I want to know whether each of us can adjust the volume independently and whether we’ll hear the same or different mixes. Around 29% of consumers prioritise listening together.
Sending signals to separate outputs Check the number of line outputs and whether the interface and software support the routing you need. If I want to send a reference or another signal to a separate output, I need outputs that support that routing. Around 21% of consumers say separate signal routing is their top priority.
Recording new tracks Count microphone, instrument and line inputs separately, and check how many you can use at the same time. If I’m also recording new sources while editing, I want the inputs to suit those sources and recordings. Around 14% of consumers put new simultaneous recordings first.

Common buying mistakes

  • Assuming four inputs means four microphone inputs

    For the Focusrite Scarlett 4i4 4th Generation and MOTU M4, the documented input configuration includes two combo inputs and two additional line inputs. So the total number of inputs doesn’t tell you how many microphone preamps are available.

    Count the input types you need separately and check how many sources you want to record at the same time.

    If you want to record more microphones simultaneously later, you may need extra equipment or a different interface.

  • Assuming two headphone connections mean two different mixes

    The number of physical connections alone doesn’t tell you whether both listeners can have their own mix or separate volume controls.

    Check the controls and mix routing in the documentation for the exact model. If you really need different mixes, make sure that routing is supported.

    You may need extra routing or equipment to provide a different listening mix.

  • Assuming a USB-C plug guarantees sufficient power

    For USB bus power on the iD14 MKII, Audient specifies a USB 3.0 port providing at least 0.9 A at 5 V. This model-specific requirement doesn’t automatically apply to other interfaces.

    Compare the power requirements for this model with the port on your computer.

Brands to compare

Solid State Logic

The SSL 2+ MKII may be worth considering if two people want to listen at the same time and separate volume control matters.

  • Solid State Logic documents two headphone outputs with separate volume controls and two recording channels.
  • Separate volume controls don’t prove that each listener gets a different mix, so check the routing.

Audient

According to Audient, the iD14 MKII combines two headphone connections with four line outputs and an optical ADAT input.

  • Audient lists direct monitoring and expansion via ADAT.
  • The feature description consulted doesn’t confirm independent volume control for the two headphones. For USB bus power, Audient specifies a USB 3.0 port providing at least 0.9 A at 5 V; check the port on your computer.

Focusrite

The Scarlett 4i4 4th Generation may suit editing setups that need extra line connections or separate headphone and line mixes.

  • According to Focusrite, this model has two mic/line/instrument preamps and two additional line inputs. Focusrite describes separate mixes for the headphone and line outputs.
  • The two additional line inputs aren’t extra microphone preamps.

MOTU

According to MOTU, the M4 is equipped with four analogue line outputs and one headphone output.

  • MOTU specifies a separate volume control for the headphone output, plus two combo inputs and two additional line inputs.
  • One documented headphone output isn’t enough to connect two pairs of headphones directly.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need four microphone inputs to edit existing live tracks?

No. Editing existing tracks doesn’t in itself require extra microphone inputs. You’ll need to count those inputs if you also want to record new microphone signals simultaneously. According to Focusrite, two of the Scarlett 4i4 4th Generation’s four analogue inputs are additional line inputs, not extra microphone preamps.

Can two headphone connections automatically play two different mixes?

No, you can’t tell from the number of connections alone. Solid State Logic documents separate volume controls for the SSL 2+ MKII; check the mix routing you need separately. Audient confirms that the iD14 MKII has two headphone connections, but the feature description consulted doesn’t confirm independent volume control.

What should I check when connecting the Audient iD14 MKII?

Check that your computer’s port meets Audient’s USB bus power specification: a USB 3.0 port providing at least 0.9 A at 5 V. This is a manufacturer requirement for this model, not a general requirement for all audio interfaces.

What legal rights apply when buying online in the Netherlands?

According to the Dutch government, when you buy online from a business, you’re often entitled to a 14-day cooling-off period; check the terms that apply to your purchase. If a product is faulty, the seller is responsible for dealing with your statutory guarantee rights. There is no single fixed statutory guarantee period for all products in the Netherlands.

What should I check about product safety for an electronic device?

The Dutch government states that electronic devices placed on the EU market must have a CE marking. Check the product and seller information for the specific item you’re considering; a brand name or general product specification alone doesn’t confirm that the item being offered carries the marking.