Who is this guide for?

Editing existing rehearsal recordings

Your recordings are already on your computer, and you mainly want to listen comfortably through headphones or speakers and adjust the volume. Extra recording inputs aren’t automatically an advantage in this case.

Band member who also records new rehearsals

You want to edit individual parts later. Count how many microphone and line-level sources you want to connect at the same time, rather than looking only at the total number of channels.

Editor with several listening setups

You switch between headphones, monitors or an external audio chain, and may need different output mixes.

What should you look for when choosing?

First decide whether you want to record new sources or just edit existing files. Then choose the connections, controls and listening options that suit your workspace.

No new interface

When: You’re working with existing files and your computer’s current output works well with your headphones or speakers.

Trade-off: You won’t get extra physical microphone or monitor outputs; an interface can’t change signals that have already been recorded.

Compact interface

When: You want to connect wired headphones and possibly monitors, and record up to two suitable sources at the same time.

Trade-off: Two inputs don’t automatically mean two microphone inputs. Also check whether you can set up the listening mixes you need separately.

Extra line outputs or separate mixes

When: You need another output route or mix in addition to your own listening setup.

Trade-off: Extra outputs aren’t the same as extra microphone preamps or a second headphone socket.

Multiple microphone preamps

When: At your next rehearsal, you want to connect several microphones individually and record them at the same time.

Trade-off: This extra recording capacity adds little if you only listen to and edit previously recorded files.

What to consider What to check before buying Who is this important for?
Easy access while listening Check the headphone connection, monitor outputs, position of the volume controls and cable length at every desk height. When I’m listening to existing recordings, I want my headphones and volume control within easy reach, without the cables being pulled tight. Around 40% of consumers prioritise listening.
Inputs for new recordings Count microphones, instruments and line-level sources separately, and check how many of each type of input are available at the same time. If I also record rehearsals, I want to be able to connect each source I need at the same time individually. Around 30% of consumers prioritise multitrack recording.
Separate listening routes Check whether the headphones and line outputs can each receive the separate mix you want, and how many physical headphone sockets there are. When I switch between different listening destinations, I want to know whether each can have its own mix. Around 20% of consumers prioritise separate listening routes.
Connection and desk setup Check computer compatibility, the USB port and power requirements. Arrange cables so they don’t get pulled when you adjust the desk. When my desk moves, I want the connections and cables to work in both the highest and lowest positions. Around 10% of consumers prioritise computer and desk compatibility.

Common buying mistakes

  • Buying more inputs to improve existing recordings

    Existing files are imported into editing software; extra recording inputs are for connecting new sources.

    First check whether your current listening setup meets your needs, then decide whether you need new inputs.

  • Assuming four inputs in total means four microphone inputs

    Inputs can be different types. Focusrite’s Scarlett 4i4 4th Generation has two microphone preamps and two extra line inputs; Steinberg specifies four microphone preamps for the UR44C.

    Check the specifications and count microphone preamps and line inputs separately.

  • Assuming any USB port will power the interface without problems

    Power requirements vary by model and computer. Audient specifies a minimum USB power requirement for the iD4 MKII; Focusrite describes additional power as an option for the Scarlett 2i2 4th Gen if the computer’s USB port can’t provide enough power.

    Compare the exact model’s power requirements with your computer before choosing an interface.

    Depending on the model and computer, suitable additional power may be needed.

  • Confusing extra outputs with a second headphone socket

    According to MOTU, the M4 has four balanced line outputs and one headphone socket. Focusrite says the Scarlett 4i4 4th Generation can provide separate mixes for the headphones and line outputs.

    Check the physical connections and software routing separately.

    You may need extra equipment or a different interface for the listening setup you want.

Brands and models to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for a compact setup with two inputs. The Scarlett 4i4 4th Generation adds line inputs and separate mixes for the headphones and line outputs.

  • Focusrite lists two microphone preamps for the Scarlett 4i4 4th Generation, along with separate mixes for the headphones and line outputs.
  • The Scarlett 2i2 4th Gen may need additional USB power if the computer’s port doesn’t supply enough.

Audient

The iD4 MKII suits a setup with one microphone source, an instrument input and two physical headphone sockets.

  • Audient lists Monitor Mix and ScrollControl as features of the iD4 MKII.
  • Audient specifies one microphone preamp and requires a suitable USB 3.0 port providing at least 0.9 A at 5 V for bus power.

MOTU

The M4 is designed for a setup that can make use of two combination microphone/instrument inputs, extra line inputs and four line outputs.

  • MOTU specifies four balanced line outputs and level meters for the M4.
  • The four inputs in total aren’t four microphone preamps; the M4 has one headphone socket.

Steinberg

The UR44C is worth considering if you also want to record rehearsals using up to four separately connected microphones.

  • Steinberg specifies four D-PRE microphone preamps and two headphone sockets for the UR44C.
  • You don’t need this extra recording capacity if you only edit files that have already been recorded.

Arturia

The MiniFuse 2 is a compact two-channel option for anyone looking for MIDI, a USB hub and physical monitoring controls.

  • Arturia specifies two inputs, two outputs, one headphone socket, MIDI I/O and a USB hub.
  • A built-in hub doesn’t guarantee that your computer’s port or all connected devices will get enough power.

Joybuy products

Related products coming soon.

Frequently asked questions

Can you edit existing rehearsal recordings without a new audio interface?

Yes, if you can open the files in your editing software and your current playback connection meets your needs. The Audacity Manual explains how to import existing audio files into a project; you don’t need a new interface just for this.

What should you check before connecting an interface to a sit-stand desk?

Check the USB and power requirements for the exact model, and make sure the cables can move freely when the desk is at both its highest and lowest settings. Audient specifies a minimum of 0.9 A at 5 V via USB 3.0 for the iD4 MKII; Focusrite lists an optional power connection for the Scarlett 2i2 4th Gen if the computer can’t supply enough power.

How can you reduce the risks of listening back for long periods?

Start with your headphone volume low, and keep an eye on how long you listen for. According to the World Health Organization, safe listening time falls quickly as sound levels rise.

What cooling-off period and warranty apply when buying online in the Netherlands?

For online consumer purchases, you generally have a statutory cooling-off period of up to 14 days after delivery, with some exceptions. You’re also entitled to a product that lasts as long as you could reasonably expect; ACM ConsuWijzer explains that there is no fixed Dutch warranty period that applies to all products.

Is a CE logo an independent safety mark?

No. The Netherlands Enterprise Agency describes CE marking as the manufacturer’s declaration that a product meets the relevant EU requirements, not as an independent quality mark or safety guarantee. Electrical and electronic devices must also meet requirements relating to an EU declaration of conformity.