Who is this buying guide for?

Recording series creator

You record speech or music at different times and want to deliver files at a similar loudness. As well as an audio interface, you’ll need a workflow for comparing the loudness of your files. The European Broadcasting Union explains this distinction in EBU R 128.

Recording beside a bright window

You want to check your input settings without relying solely on a computer screen that may be difficult to see. Check how easy the interface is to read from your usual recording position, taking your actual viewing angle and the light into account.

Solo recorder using different sources

You switch between a microphone and an instrument, or record both at once, and want to check in advance how many inputs and what kind of gain controls you’ll need. MOTU, Focusrite and Audient describe different metering and control options for the models featured here.

What should you look for when choosing?

First, distinguish between monitoring the input level while recording and comparing the loudness of finished files. Then decide whether clear meter readings beside the window, control over loud passages or the number of connections matters most for your setup.

What to consider What to look for when buying Who is this important for?
Consistent loudness across finished recordings Check whether your recording software can measure and adjust file loudness, and assess the maximum peaks too. The European Broadcasting Union makes this distinction in EBU R 128. If I want to deliver recordings at a similar loudness, I need to be able to compare the files themselves. Around 31% of consumers put consistent final loudness first.
Easy-to-read level meters Assess the interface’s position, your viewing angle and reflections in your own workspace. Don’t assume a particular meter type will be easy to read in bright light. If I record beside a bright window, I want to be able to read the levels from my recording position. Around 31% of consumers prioritise readability in their workspace.
Monitoring recording peaks Before recording, play the loudest passage you reasonably expect and check the recording afterwards. Audient recommends using a loud, representative section with Smartgain. When passages vary in volume or get loud, I want to check the input level before recording further. Around 25% of consumers put avoiding unexpected clipping first.
Connections and computer requirements Count the sources and headphones you need to use at the same time. Also check the input types and any driver or power requirements for the exact model. If I want to connect several sources or separate headphones, the number of connections needs to suit my setup. Around 13% of consumers prioritise having the right connections.

Common buying mistakes

  • Matching input peaks and assuming the files will sound equally loud

    The European Broadcasting Union distinguishes average programme loudness from maximum peak levels. So, similar peaks during recording don’t automatically mean that finished files will sound equally loud.

    Use the meters to monitor your recording, then compare the loudness and peaks of the files.

    Files with different loudness levels may need extra post-production.

  • Assuming a colour display or Gain Halo will automatically be easy to read in sunlight

    A display, Gain Halo or LED ring offers a different type of feedback, but the meter type alone can’t tell you whether reflections will be distracting in your workspace.

    Check your viewing angle, reflections and the interface’s position beside your window before making meter visibility your deciding factor.

  • Setting automatic gain using only a quiet test passage

    The setting depends on the passage you play. For the EVO 4, Audient recommends using a loud section; a louder passage later on could otherwise affect the recording.

    Test with a representative loud section and check the result again if the source or setup changes.

    A louder passage later on could mean having to record again.

Brands to consider for this type of setup

MOTU

The MOTU M2 is worth considering if you want to view meters for two inputs directly on the interface.

  • MOTU specifies that the M2 has a colour display with input and output meters, plus separate gain controls for each input.
  • Check how easy the meters are to read beside your window. They don’t replace comparing the loudness of finished files.

Focusrite

The Scarlett 2i2 4th Gen is designed for those who want to combine automatic features with physical feedback when setting up two recording channels.

  • Focusrite documents Auto Gain, Clip Safe and Gain Halos for this model.
  • According to the manual, the 48V switch controls both microphone inputs, so check that this power supply is suitable for your connected equipment. Gain Halos don’t measure the loudness of finished files.

Audient

The EVO 4 is a good option for a compact two-channel setup with Smartgain and single-knob control.

  • Audient describes Smartgain as a feature that can set the levels of the two selected inputs.
  • Audient recommends using a loud, representative passage. Smartgain doesn’t guarantee that finished files will be equally loud.

Solid State Logic

The SSL 2+ MKII is worth considering if two people need their own headphone output.

  • Solid State Logic documents two independent headphone outputs with separate volume controls for this model.
  • Solid State Logic notes that the corresponding audio driver is required on Windows. The extra outputs won’t resolve differences in final loudness.

Joybuy products

Related products coming soon.

Frequently asked questions

Can an audio interface automatically make different recordings equally loud?

No. Matching input peaks won’t automatically make finished files equally loud. Measure and compare the loudness of the files, and check their maximum peaks too. The European Broadcasting Union’s EBU R 128 explains this distinction for broadcast programmes; the broadcast target level it specifies isn’t automatically a requirement for your recordings.

How do I set automatic gain if some passages are much louder?

When setting the level, include the loudest passage you expect and check the recording afterwards. Audient recommends this approach for the EVO 4; Focusrite documents Auto Gain and Clip Safe for the Scarlett 2i2 4th Gen.

Do I need to install software on Windows?

That depends on the model you choose. Solid State Logic requires the corresponding USB audio driver to be installed on Windows for the SSL 2+ MKII. Check the requirements for the exact model and your computer before buying.

What are my rights if an audio interface I buy online is faulty?

For a distance sale from a business, the Dutch government generally allows a 14-day cooling-off period; this arrangement doesn’t apply to purchases from private sellers. You’re also entitled to a statutory guarantee if a product is faulty. There’s no fixed statutory guarantee period in the Netherlands; report the problem to the seller.

Is CE marking compulsory on every audio interface, and does it prove the device records well?

CE marking applies only to products covered by specific EU rules. The European Commission lists electrical and electronic equipment as a product category that may be covered by such rules; the applicable rules depend on the specific product. CE marking isn’t a test result for recording levels or readability beside a window.