Who is this choice relevant for?

Comparing existing recordings

You mainly listen back to recordings and want to assess differences in perceived loudness before buying extra hardware. The European Broadcasting Union describes loudness measurement as an alternative to relying on peak meters alone; Youlean describes how to analyse audio files.

Recording at home too

You record new sources and want to monitor the input level before comparing the recordings. Focusrite and MOTU describe features for setting or reading levels while recording.

Using multiple listening routes

As well as comparing recordings, you need different connections or routing options for your setup. Audient and MOTU’s specifications provide examples of interfaces with additional connection options.

What should you look for when choosing?

Existing listening output with loudness software

Choose this if: you’re only comparing existing files and your current listening output is sufficient.

Bear in mind: this won’t add microphone or line inputs for new recordings.

Compact recording interface

Choose this if: you also want to record one or two sources and control the input gain.

Bear in mind: automatic input setup doesn’t replace measuring the loudness of finished files.

Interface with extra metering or routing

Choose this if: you want to read input and output levels while recording, or need extra line connections.

Bear in mind: extra channels and routing don’t replace measuring the loudness of complete files.

What to consider What to look for Who is this important for?
Loudness of existing files Measure complete files using the same loudness method; adjust them in software if needed. When I compare existing recordings, I want to know whether they sound equally loud without buying new hardware. Around 36% of consumers say that judging file loudness consistently is their top priority.
Listening route and volume Check the headphone and monitor outputs, and how you set the volume for your listening route. When listening back at a comfortable level, I want to assess both recordings using the same route and volume setting. Around 29% of consumers say this is their most important selection criterion.
Level while recording Count how many microphone and line inputs you need to use at the same time, and check how you set or read the input level. If I also record new sources, I want to be able to monitor the input level before comparing files. Around 21% of consumers say recording gain is their top priority.
Connections and computer List the inputs and outputs you need, then check with the manufacturer that your computer and operating system are currently supported. I want to know in advance whether the connections and support will work with my existing equipment and computer. Around 14% of consumers prioritise connections and compatibility.

Common mistakes

  • Confusing peak meters with equal loudness

    Recordings with similar peaks can still sound different in loudness.

    Measure complete files with a loudness meter. Use interface meters to monitor signals while recording.

  • Confusing Auto Gain with post-recording normalisation

    Focusrite describes Auto Gain as a feature for setting the recording input, not for matching the loudness of existing files.

    Use file analysis and software adjustments for finished recordings; choose automatic input gain only if you want that assistance while recording.

  • Assuming two headphone sockets mean two independent mixes

    According to the manual, the SSL 2 MKII’s headphone sockets are parallel.

    Check whether the outputs can be controlled independently if different listeners need their own level or mix.

Brands to consider

Focusrite

The Scarlett 2i2 4th Generation is a compact option if you want to record up to two sources as well as compare recordings.

  • Focusrite describes Auto Gain and Clip Safe as features for setting or adjusting the recording input. The model has two inputs and two outputs.
  • These features won’t automatically make finished files equally loud.

MOTU

The M4 is worth considering if you need visible meters and extra line connections.

  • MOTU specifies an LCD with input and output meters, two combo inputs and two additional line inputs.
  • The meters show levels while the interface is in use; they don’t automatically measure the integrated loudness of complete files.

Audient

The iD14 MKII is an option if you need line outputs or optical expansion.

  • Audient lists four line outputs, two microphone preamps and an ADAT input.
  • Extra connections add little if you’re only listening back to existing files.

Solid State Logic

The SSL 2 MKII is a two-channel option with monitor outputs and stereo loopback.

  • Solid State Logic specifies two recording inputs and balanced monitor outputs.
  • According to the manual, the two headphone sockets are parallel, so they don’t provide two independently controlled listening mixes.

RME

The Babyface Pro FS is designed for setups that need extensive routing and an adjustable analogue output level.

  • RME describes TotalMix FX routing and a switchable output level.
  • These features aren’t needed to compare the loudness of existing files in software.

Audio interfaces at Joybuy

Related products will be available soon.

Frequently asked questions

Will an audio interface automatically make my existing recordings equally loud?

No. Measure the loudness of complete files using suitable software, and adjust them there if needed. An input meter and recording gain serve a different purpose.

How can I make a fair comparison when listening back?

Use the same listening route and volume setting for both recordings, and measure complete files using the same loudness method. The European Broadcasting Union explains why peak levels alone aren’t a substitute for loudness measurement; its specific broadcasting application isn’t automatically a target for every home recording.

What should I check when connecting and setting it up?

Count microphone, line, monitor and headphone connections separately. Then check with the manufacturer whether your computer and operating system are supported; connections and system requirements vary by model.

Should I buy an extended warranty when purchasing an interface in the Netherlands?

No, you don’t need an extended warranty to have statutory consumer protection. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands, and the seller is your point of contact if a product is faulty. If you’re considering a paid extended warranty, check what additional rights it actually offers.

What product regulations apply to an audio interface in the Netherlands?

The EU requirements and any CE marking obligations that apply depend on the product category and the relevant regulations. The Netherlands Enterprise Agency points out that some products may be covered by multiple regulations; according to Dutch government guidance, CE is not a quality mark for sound. Check the conformity information for the specific model.