Which setup is right for you?

Creator in a noisy flat

You want to record clear dialogue, even if you can hear traffic, housemates or room reflections. Start with microphone placement and test recordings, rather than expecting a feature to remove room noise automatically. Shure explains the limitations of microphones when separating direct speech from reflections.

Director working with several actors

You want to be able to edit each voice separately when actors speak at the same time, and check that everyone has their own listening point. Zoom and Focusrite specify different numbers of microphone and headphone connections for each model. Tracks recorded to a card and USB channels are not automatically the same thing.

Creator using live sound cues

You want to bring in effects, computer audio or a guest during a scene, and decide in advance whether you need to edit each source separately later. Focusrite and RØDE model specifications describe different options for loopback, sound pads and recording.

What should you look for when choosing?

Computer interface for audio software

A good fit if: you usually record one or two actors at a time to separate tracks on a computer and edit them later.

Bear in mind: the Scarlett 2i2 4th Gen has one headphone output, so two actors cannot automatically listen through their own separate outputs.

Standalone recorder with an SD card

A good fit if: up to four actors need an XLR microphone and headphones at the same time, and recording to an SD card suits your editing workflow.

Bear in mind: Zoom specifies the PodTrak P4 as a 2-in/2-out interface over USB, so four separate tracks on the card do not mean four separate USB microphone tracks.

Production console for live cues

A good fit if: you use up to two wired XLR microphones and want to trigger sound effects during a performance or record without a computer. The RØDECaster Duo has two headphone outputs and sound pads.

Bear in mind: extra mixer features will not make a noisy recording space quieter. A noise gate is no guarantee that room noise will disappear during dialogue.

Interface designed for conversations

A good fit if: two speakers each need a microphone and headphones, and phone audio is important. Focusrite lists two microphone and two headphone connections, as well as Bluetooth phone audio, for the Vocaster Two.

Bear in mind: check how guest audio and separate tracks are routed in your recording software. The connections will not solve background noise in the room.

What to consider What should you check? Who is this important for?
Clear voices Make test recordings in the actual space and check microphone position and levels with both quiet and loud dialogue. If traffic, housemates or reflections could be picked up in your flat, first find out what a different microphone position can do. Around 36% of consumers prioritise clear voices despite background noise.
Separate tracks for the cast Count the voices speaking at once, then check the microphone inputs, computer channels and any tracks recorded to a card separately. If several actors speak at the same time, you will want to work with their voices separately during editing. Around 29% of consumers prioritise separate recordings of voices captured simultaneously.
Monitoring and live sources Count the headphone outputs and check how effects, computer audio or a guest are routed. If actors want to listen in at the same time, or you use cues and guest audio during a scene, the routing needs to suit your workflow. Around 21% of consumers prioritise monitoring and live sources.
Computer workflow Check the connection to your computer and software, level controls and how many headphone connections you need. If you build scenes mainly in audio software, you will want a straightforward computer setup without live features you do not use. Around 14% of consumers prioritise a simple computer workflow.

Common buying mistakes

  • Assuming noise reduction will solve problems in your flat

    Noise and reflections that reach the microphone along with the voice will not disappear just because you choose a different interface. Shure points out that a microphone cannot effectively separate direct speech from reflected sound.

    Test the room and different microphone positions with trial recordings before making extra processing features a deciding factor.

    An unsuitable recording space can mean more time spent on retakes or adjusting your setup.

  • Assuming inputs, tracks recorded to a card and USB channels are interchangeable

    Zoom says the PodTrak P4 has four XLR inputs and records separately to an SD card, but works as a 2-in/2-out interface over USB.

    For the exact model, check separately how many microphones, tracks recorded to a card and computer tracks you can use.

  • Counting microphones but forgetting listening points

    An interface may have enough microphone inputs, but fewer headphone outputs than there are actors who want to listen separately during the same take. Focusrite says the Scarlett 2i2 4th Gen has one headphone output.

    Count how many listening points you need and compare that number with the headphone outputs on the exact model.

    You may need extra equipment or a different interface for separate monitoring.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for recording two wired voices on a computer, while the Vocaster Two is more specifically geared towards conversations, with two headphone connections and phone audio.

  • According to the model specifications, the Scarlett 2i2 4th Gen has two microphone connections and loopback; the Vocaster Two has two microphone and two headphone connections.
  • The Scarlett 2i2 4th Gen has one headphone output. These features apply to the models mentioned, not automatically to every Focusrite device.

Zoom

The PodTrak P4 suits recordings with up to four wired voices and four listening points, if recording to an SD card works for your workflow.

  • Zoom specifies four XLR microphone inputs, four headphone outputs with individual volume controls, and separate tracks recorded to a card.
  • The PodTrak P4 is a 2-in/2-out interface over USB. The P4next is a separate model, so its features are not automatically available on the P4.

RØDE

The RØDECaster Duo is designed for scenes with live control and standalone recording using up to two wired microphones.

  • According to RØDE's product specifications, the model has two microphone inputs, two headphone outputs, sound pads and standalone recording.
  • A noise gate opens and closes at set levels; that does not mean it removes background noise during dialogue.

Audient

The EVO 4 is a compact computer interface for up to two wired microphones, with Smartgain for setting levels.

  • Audient lists two microphone preamps, Smartgain and loopback.
  • The EVO 4 has one headphone output, so bear this in mind if both actors want to monitor separately.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Will an audio interface make a noisy room quiet?

No, an interface will not make the room quiet. First, find a suitable microphone position and make a test recording in your flat: Shure explains that a microphone cannot effectively separate direct speech from reflected sound. A noise gate on the RØDECaster Duo opens and closes at set levels; that is no proof that noise will disappear during dialogue.

How do I connect and test the setup for a scene?

Connect each XLR microphone to a suitable microphone input, then select the interface as the input and output device in your recording software settings. Set the levels and listen back to a test recording with both quiet and loud dialogue. If you use loopback, also check that you are not routing the returned channel back to itself.

Do four tracks recorded to the Zoom PodTrak P4's card also mean four separate USB inputs?

No. Zoom specifies separate recording tracks on an SD card, but the PodTrak P4 is a 2-in/2-out USB audio interface. So plan to transfer the files from the card separately from recording directly into computer software.

What warranty and cancellation rights apply to an online purchase in the Netherlands?

When you buy as a consumer, you are entitled to a product that conforms to the contract. According to the Dutch government, the Netherlands has no fixed statutory warranty period, and the seller is your point of contact if something is wrong. Online purchases generally come with a statutory 14-day cooling-off period after delivery, subject to legal exceptions. Also check any terms set by the seller or manufacturer.

What does CE marking mean on an electronic audio interface?

If a product is covered by EU rules that require CE marking, the manufacturer uses the mark to indicate that it meets the applicable requirements. The rules depend on the product; a model being mentioned in this buying guide does not confirm that a specific listing complies.