Producer recording a cast in one room
You want to record several actors at once and edit their voices separately later.
Choose based on how many voices you want to record at the same time, and on separate tracks: count the physical mic preamps or XLR microphone inputs, not just the total number of inputs. Then check how many headphones can be connected directly, and whether you’ll record to a computer or a memory card. Manufacturers such as Focusrite, Audient and Zoom describe these features in their product specifications; these are not independent comparisons of recording performance.
You want to record several actors at once and edit their voices separately later.
You record roles one after another, or with no more than two voices at once, and don’t want to buy microphone channels you won’t use.
You want to trigger sound effects during a performance or include a remote voice. In that case, routing and monitoring are important when choosing your setup.
Choose this option: if you record roles one after another or want to record no more than two actors at once. The Focusrite Scarlett 2i2 4th Gen has two XLR microphone inputs and loopback for computer audio.
Bear in mind: two microphone inputs aren’t enough to record four actors directly at the same time; loopback doesn’t add a physical microphone input.
Choose this option: if you want to record three or four actors at once on separate tracks. The Audient EVO 8 has four mic preamps, while the Focusrite Scarlett 18i16 4th Gen has four XLR microphone inputs.
Bear in mind: plan for headphones separately: the EVO 8 has two independent headphone outputs. Audient also states that phantom power is available on two channels when using a USB-A host computer.
Choose this option: if four performers each need their own microphone and headphones, and you want to record to a card without a computer. The Zoom PodTrak P4 has four microphone inputs, four headphone outputs and separate tracks on the card.
Bear in mind: Zoom specifies a 2-in/2-out USB interface and 16-bit/44.1 kHz WAV card recording. So four separate card tracks don’t mean four separate USB inputs for recording software.
Choose this option: if you want to combine four microphones, four headphones, sound pads and multitrack recording in one device. RØDE lists these features for the RØDECaster Pro II.
Bear in mind: consider whether you need the built-in mixing and playback features; their inclusion doesn’t prove they’ll improve every radio drama recording.
As well as counting the microphones, count the people who need to monitor the recording. Then choose how to record based on which separate signals you want to keep on your computer or memory card.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Separate voices recorded simultaneously | Count the microphones you’ll connect at once, and check whether your recorder or software captures each voice separately. | If several actors perform at once, I want to be able to edit their voices separately afterwards. Around 33% of consumers say separate voices recorded simultaneously are their main purchasing concern. |
| Multiple headphones | Count the listeners and check the number of headphone outputs and the volume controls. | If performers need to monitor the same recording, I want to know in advance how many connections are available. Around 27% of consumers prioritise monitoring together. |
| Separate takes | Decide whether you’ll record scenes simultaneously; if you’re using a computer interface, also check the connection and any software installation requirements. | If I usually record roles one after another, I don’t want to pay for channels I won’t use. Around 20% of consumers prioritise a simple setup for recording separate takes. |
| Remote voices and sound cues | Distinguish between routing computer audio back in, including a caller and triggering sounds during a performance. Check which signals are saved by USB or card recording. | If I need a remote guest to take part or want to trigger effects live, the controls need to suit my recording setup. Around 20% of consumers prioritise remote voices or live cues. |
An interface may have connections for different sources. The Focusrite Scarlett 18i16 4th Gen has four XLR microphone inputs, even though the model range lists a higher total number of inputs.
Count the physical microphone inputs you can use for your cast at the same time.
If you need more microphone channels than the device offers, you may need a different interface or additional suitable preamps.
Zoom specifies separate card tracks and a 2-in/2-out USB interface for the PodTrak P4. These recording options don’t provide the same number of separate channels.
Check separately what the card recording and USB connection can capture on your computer.
If you want to edit the voices separately on your computer, you may need a different recording setup.
Four microphone inputs don’t guarantee four headphone connections. The Audient EVO 8 has two independent outputs; the Zoom PodTrak P4 has four.
Remember to include the director or sound technician if they also need their own headphones during recording.
If there aren’t enough connections, you may need additional headphone distribution and cabling.
Audient states that the EVO 8 provides phantom power for two channels when used with a USB-A host computer.
Check the microphone type, host port and available power together.
The host connection or power setup you choose may therefore affect how you configure your recording.
The Scarlett 2i2 4th Gen is designed for up to two directly connected vocal microphones; the Scarlett 18i16 4th Gen has four XLR microphone inputs.
The EVO 8 is a computer interface with four mic preamps.
The PodTrak P4 combines card recording for four microphones with a USB audio interface.
RØDE positions the RØDECaster Pro II as an integrated solution for recording, mixing and cues.
The Studio 1824c is worth comparing if you need more than four microphone channels at once.
Only if those inputs are suitable physical microphone inputs and the chosen recording method captures each voice separately. Zoom specifies four microphone inputs and separate card tracks for the PodTrak P4, but its USB interface is 2-in/2-out.
Check whether the microphone needs phantom power and whether it’s available on the input you’re using. Focusrite specifies 48 V on the XLR microphone inputs of the Scarlett 2i2 4th Gen; Audient states that the EVO 8 is limited to two phantom-powered channels when used with a USB-A host computer.
Follow the installation instructions for your exact model and operating system. For the Scarlett 2i2 4th Gen, Focusrite recommends checking Focusrite Control 2, using the correct USB port and checking the cable or port.
Not without permission: according to the Dutch government, you need the creator’s permission to use copyright-protected music. A private copy for personal use must not be distributed or made public; check the rights before publishing the work in question.
That depends on who processes the data and how the recording is used or published. The Dutch Data Protection Authority explains that organisations need a GDPR lawful basis to process personal data, and that the exception for purely personal or household use is limited. Consent is one possible lawful basis, but it isn’t automatically the only one.