Solo performer
You record one voice at a time and want a suitable microphone input and control over the recording level. Focusrite specifies one microphone input for the Scarlett Solo 4th Gen.
If you’re recording one voice at a time with an XLR microphone, start with one suitable microphone input, a headphone socket and direct monitoring. For two performers recording simultaneously, you’ll need two microphone inputs. Also check the gain controls, level indicators, and your computer’s connection and power requirements. An audio interface won’t fix echo or poor microphone placement in the booth.
You record one voice at a time and want a suitable microphone input and control over the recording level. Focusrite specifies one microphone input for the Scarlett Solo 4th Gen.
You want to hear yourself or an existing recording through headphones while performing. Audient describes the iD4 MKII as having a direct monitor mix and two headphone outputs.
You need two microphones at the same time, or want to make sure the interface works with your computer’s ports and power supply. Focusrite and MOTU describe models with two microphone inputs; also check the requirements for the specific model against your computer.
First, choose according to how many microphones you’ll record at once. Then consider how you’ll monitor the audio while performing, and whether the interface suits your computer and the acoustics of your booth.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Clear vocals | Check the type of microphone input, the gain controls and any level indicators. Make a test recording with both quiet and loud passages, and assess the microphone placement too. | If I want to capture quiet lines and loud emphasis clearly, I look at both level control and the sound of the booth; around 36% of consumers here put vocal clarity first. |
| Monitoring | Check whether direct monitoring is available, how you control the mix of your voice and computer audio, and whether your headphones can be connected. | If I want to hear myself or an existing recording while performing, suitable headphones and a monitor mix are important; around 29% of consumers here put monitoring first. |
| Two microphones | Count the separate microphone inputs, not just the total number of inputs. Check that each microphone can be connected separately. | If two performers need to record at the same time, I need two microphone inputs; around 21% of consumers want to record two voices simultaneously. |
| Computer and power | Compare the USB port and available power with the model specifications, and check that your operating system is supported. Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 port for the iD4 MKII. | If I want to record using my existing laptop, I check the port, power supply and software support in advance; around 14% of consumers here put computer compatibility first. |
An instrument input alongside one microphone input isn’t a second microphone preamp. This distinction matters for products including the Scarlett Solo 4th Gen and AudioBox GO.
Check how many microphones you want to connect at the same time, and count the actual microphone inputs.
For a duo recording, an interface with just one microphone preamp could mean you need to buy a different model after all.
Shure explains that a microphone can’t improve the acoustics of the recording space, and that reflected speech can reduce clarity.
Make a test recording from the intended microphone position and assess the sound of the booth before basing your choice on extra interface features.
Making a test recording and adjusting your recording setup, if needed, takes time.
A plug that fits doesn’t confirm that the port supplies enough power or that the interface works with your computer and software.
Before buying, check the model-specific power requirements and operating system support. For the iD4 MKII, Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 port.
The Scarlett Solo 4th Gen is designed for one XLR microphone, while the Scarlett 2i2 4th Gen has two microphone preamps.
The iD4 MKII is an option for recording one voice when direct monitoring and two headphone outputs are useful.
The M2 is worth considering if you want to connect two microphones and need separate controls for each input.
The AudioBox GO combines one microphone/line input with a separate instrument input and an adjustable monitor mix.
No, not for one XLR microphone that you use at a time. Focusrite specifies one microphone preamp for the Scarlett Solo 4th Gen and two for the Scarlett 2i2 4th Gen.
No, an audio interface won’t improve the acoustics of the booth. Shure points out that reflected speech can reduce clarity, so check the microphone placement too and make a test recording.
Check the microphone inputs, headphone monitoring, USB power supply and operating system support. For the iD4 MKII, Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 port; Focusrite provides separate downloads for Windows and Mac for the Scarlett 2i2 4th Gen.
For online purchases by consumers, there’s usually a 14-day cooling-off period after delivery, subject to legal exceptions, according to ACM ConsuWijzer. The Netherlands Authority for Consumers and Markets says the seller is responsible for the statutory guarantee if a product doesn’t meet what you’re entitled to expect from it. This is separate from any commercial manufacturer’s warranty.
The Dutch government states that electronic devices in the EU must carry a CE marking when one is required for that product. Check the marking and product information for the specific version on offer; a general specifications page doesn’t confirm that the product being offered complies with the requirements.