Solo poetry reader
You record one voice at a time and want to choose a suitable microphone input before paying for extra channels. Also consider your room and the connection your microphone needs.
For a solo poetry reader, one suitable microphone input is usually enough. Two microphone preamps are mainly useful if you want to record a second voice or microphone at the same time. Also check that the interface is compatible with your microphone, headphones, computer and recording software. An interface won’t remove reverb or background noise by itself: your room and microphone setup still matter.
You record one voice at a time and want to choose a suitable microphone input before paying for extra channels. Also consider your room and the connection your microphone needs.
You want to hear your voice through headphones while speaking, and possibly monitor your computer’s playback too. PreSonus describes the AudioBox GO as having a mixer control for the input signal and computer playback; check that this setup suits your recording needs.
You want to record two voices simultaneously on separate channels. You’ll need two microphone preamps for this; MOTU and Steinberg describe these on the M2 and UR22C respectively.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| One voice and microphone compatibility | Check the number of microphone preamps, the stated gain and whether your microphone needs 48V. Also make a test recording in the place where you plan to record. | I record one voice and want a suitable input as well as a quiet spot with little reverb; around 36% of consumers put this first. |
| Monitoring | Check whether direct monitoring is available, how the input and computer playback are mixed, and whether your headphones are compatible. | If I want to hear my voice through headphones while reading, monitoring is a key consideration. Around 29% of consumers give monitoring top priority. |
| Two microphones at once | Count the separate microphone preamps; an extra instrument input isn’t automatically suitable for a second microphone. | I need two microphone preamps to record two voices on separate channels. Around 21% of consumers choose an interface primarily for this reason. |
| Computer and connection | Compare the system requirements for the exact model and recording software with your computer. Also check the USB connection and power supply. | I want to use the interface with my existing computer without connection or power issues; around 14% of consumers give compatibility the highest priority. |
An instrument input can’t replace a second microphone preamp. Focusrite and PreSonus each specify one microphone input for the Scarlett Solo 4th Gen and AudioBox GO, while MOTU describes the M2 as having two mic/line combo inputs.
Count the separate microphone preamps and check the connections on the exact model before choosing.
If you later want to record a second voice at the same time, you may need an interface with more microphone preamps.
An extra input or a different interface feature won’t remove reverb and background noise by itself. Focusrite’s spoken-word guide recommends a quiet room with little reverberation, soft materials and curtains.
First, make a test recording where you plan to record and listen for reverb, background noise and plosive sounds.
Buying extra interface features won’t solve a problem with your recording space.
A compatible plug doesn’t, by itself, mean that the power supply and system requirements are right. Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 port for the iD4 MKII.
Before buying, check the requirements for the exact model and make sure your laptop or hub meets them.
You may need to use a different suitable port or arrange the connection differently.
The Scarlett Solo 4th Gen is designed for one XLR microphone.
The M2 is an option if you need two separate microphone inputs or monitoring for each input.
The iD4 MKII is designed for one microphone, with a direct monitor mix and headphone connections.
The AudioBox GO offers a way to connect one microphone, with a mixer control for monitoring.
The UR22C combines two microphone preamps with monitoring and streaming features.
No, not if you want to record one microphone at a time. Check the number of microphone preamps: on the Scarlett Solo 4th Gen and AudioBox GO, the extra instrument input isn’t a second XLR microphone input.
Only switch on 48V if your microphone’s specifications say that it needs phantom power. Check the manual for the exact model; interfaces can differ in how many inputs have 48V available.
Start with the room and setup: if possible, record in a quieter room with less reverb and check for plosive sounds. Focusrite’s spoken-word guide recommends a quiet room with little reverberation; this doesn’t mean that a particular interface model will solve room problems.
Compare the system requirements for the exact interface model and your recording software with your computer’s USB connection and available power. Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 port for the iD4 MKII; don’t assume every hub can supply the same amount.
No. According to the Dutch government, the Netherlands has no fixed legal guarantee period; if a product is faulty, the retailer is your point of contact. For ordinary online consumer purchases, you’re often entitled to a 14-day cooling-off period; check whether this applies to your contract.