If you’re only editing existing percussion tracks, choose an interface based on your headphones, monitors, computer and preferred listening setup; extra microphone preamps won’t add anything to that work on their own. For overdubs, the available inputs and your monitoring setup matter. If you’re recording with several microphones at once, count the built-in microphone preamps rather than just the total number of inputs.
Who is this choice of audio interface relevant to?
Editing existing percussion tracks
You want to assess recorded taps, dynamics and placement in your home studio. Editing lots of tracks doesn’t automatically mean you need extra recording channels. Interface.nl explains that the features you need depend on how you plan to use the interface and your setup.
Recording with several microphones
You want to record percussion or drums simultaneously onto separate microphone tracks. Count microphone preamps separately from line and digital inputs; manufacturers such as Steinberg, Audient and Focusrite list these connections separately.
Recording overdubs
You’re recording new parts while existing tracks play and want to know whether you’re hearing the direct input signal or the signal coming back from your software. The Audacity manual explains how to listen to a live recording and earlier tracks at the same time through headphones.
What should you look for when buying?
Listening to and editing existing tracks
Choose this if: your percussion has already been recorded digitally and you mainly listen through headphones or monitors. According to MOTU, the MOTU M4 has one stereo headphone output and four line outputs.
Trade-off: the M4 has two microphone preamps; extra microphone channels aren’t necessarily needed for existing audio material.
Recording the occasional overdub
Choose this if: you sometimes record a percussion source as well as editing, and want to keep hearing the earlier tracks. The Focusrite Scarlett 4i4 4th Generation has two microphone preamps and two additional line inputs.
Trade-off: not all four inputs are microphone inputs. Make a test recording to check whether you want to monitor the direct input or the signal coming back from your software.
Recording with four microphones at once
Choose this if: you want to record with four separate microphones simultaneously; Steinberg lists four microphone preamps for the UR44C.
Trade-off: the other connections aren’t extra microphone preamps. Check current availability with the retailer before relying on this model.
Extensive multichannel recording
Choose this if: you want to record several percussion or drum microphones simultaneously onto separate tracks. According to their manufacturers, the Audient EVO 16 and Focusrite Scarlett 18i20 4th Generation each have eight built-in microphone preamps.
Trade-off: optical expansion requires compatible extra equipment and settings. Check the space, power supply, connections and requirements for the number of channels you want for each model.
| What to consider |
What to look for |
Who is this important for? |
| Listening connections |
Check the headphone connection, independent volume control and monitor outputs. Also check whether your software can play the stereo mix you want. |
If you mainly assess existing tracks through headphones or monitors, you’ll want a listening setup that suits your workspace. Around 36% of consumers in this decision-making context put assessing existing tracks first. |
| Microphone inputs |
Count the microphones you want to connect at the same time and compare that number with the built-in microphone preamps. Consider optical expansion separately. |
If you want to record separate microphone tracks at the same time, having enough microphone preamps is what matters most. Around 29% of consumers make simultaneous multichannel recording their top priority. |
| Computer and workspace |
Compare the system requirements and USB connection of the exact model with your computer. Also check whether a power supply is included and whether the device and its cables will fit on your desk. |
If you want to connect the interface to your existing computer and home workspace, check these requirements before buying. Around 21% of consumers put computer and workspace compatibility at the top of their list. |
| Monitoring during overdubs |
Set the recording and playback devices in your software and make a test recording. Check whether you’re monitoring directly or hearing the signal through the software. |
When recording a new part over existing tracks, you’ll want to hear both and know which monitoring route is active. Around 14% of consumers make overdub monitoring their top priority. |
Things to watch out for when buying
-
Assuming the total number of inputs means the same number of microphone inputs
Line and digital inputs can’t automatically be used as separate microphone inputs. For example, the Scarlett 4i4 has two microphone preamps as well as two line inputs; Steinberg lists four microphone preamps for the UR44C.
Count the built-in microphone preamps, line inputs and digital channels separately for each model, then compare them with your recording plan.
If you can’t connect all the microphones you plan to use at once, you may need extra preamp equipment or a different interface.
-
Confusing direct monitoring with the processed signal from your software
The direct listening route and the signal coming back through your audio software aren’t the same. This means you may hear something different from what you expect during an overdub.
Make a short test recording before a session and check which monitoring route is active.
-
Counting optical expansion channels as direct microphone connections
For the expansion of the Scarlett 18i20 described by Focusrite, you need a compatible version of Control 2 and must use 44.1 or 48 kHz. Optical channels therefore don’t mean you can connect extra microphones without additional equipment.
Before buying, check the external preamp, optical connection, software version and sample rate you’ll need.
Digital expansion may require a compatible external preamp and optical connection.
Relevant brands to consider
MOTU
The M4 is a compact option for listening, occasional recording and extra analogue line outputs.
- According to MOTU’s specifications, the M4 has two microphone, line or instrument inputs, two additional line inputs, four balanced TRS line outputs and one stereo headphone output.
- The additional line inputs aren’t extra microphone preamps.
Focusrite
Of the Scarlett models reviewed, the 4i4 4th Generation has two microphone preamps, while the 18i20 4th Generation has eight.
- According to Focusrite, the Scarlett 18i20 can be expanded with ADAT, subject to certain conditions. The expansion described, up to sixteen ADAT inputs, requires a compatible version of Control 2 and 44.1 or 48 kHz.
- ADAT expansion isn’t the same as having that number of built-in microphone inputs; check the equipment and settings you’ll need.
Steinberg
According to Steinberg, the UR44C is a mid-range option for smaller multichannel recording setups.
- Steinberg lists four microphone preamps, as well as line, MIDI and headphone connections.
- Check current availability with the retailer; the specifications alone don’t confirm that the model is currently on sale.
Audient
The EVO 16 is designed for simultaneous recording through eight built-in microphone preamps, with the option of optical expansion.
- Audient lists features including two independent headphone outputs, optical connections and a software mixer.
- Check which optical equipment and settings you’ll need for the expansion you want to use.
PreSonus
The Studio 1824c is another option reviewed, with eight built-in microphone channels.
- PreSonus lists eight microphone preamps and optical ADAT expansion.
- The manufacturer lists four ADAT channels at 96 kHz; check whether this configuration suits your recording plan.
Joybuy products
Related products coming soon.
Frequently asked questions
Do I need eight inputs to edit existing percussion tracks?
No, not just to edit and play back existing files. Choose the number of inputs based on what you want to record at the same time; for editing, first check the listening outputs and computer connection.
How do I check the connection and monitoring for my first overdub?
Select the intended recording and playback devices in your audio software, connect headphones and make a test recording while earlier tracks play. Check whether you’re hearing the direct input signal or the signal coming back from the software. The Audacity manual explains how to listen to a live recording and earlier tracks at the same time; adjust the buffer settings to suit your computer setup.
How can I reduce strain when listening to percussion for a long time?
Keep your headphone volume at a sensible level and pay attention to both the volume and how long you listen. The World Health Organization (WHO) points out that both factors matter, along with repeated exposure to loud sounds. An audio interface on its own can’t guarantee a safe listening volume.
What warranty and cooling-off period apply to a consumer purchase in the Netherlands?
According to the Dutch government, as a consumer you’re entitled to a product that works as it should; in the Netherlands, there’s no fixed statutory warranty period. For eligible distance sales, you’ll often have a 14-day cooling-off period. Before buying, check who the seller is and which terms apply to your transaction.