Editor with few power sockets
You edit existing percussion tracks and first check whether your computer’s audio output is sufficient. If you do need an interface, reliable USB power may matter more than extra recording features.
You don’t automatically need an audio interface to edit and listen to existing percussion tracks: first check whether your computer’s connections are sufficient. If you want to connect wired headphones and active monitors, check the outputs you need and the exact model’s USB power requirements. Extra inputs or monitoring options matter most if you also record sources or work with several listeners.
You edit existing percussion tracks and first check whether your computer’s audio output is sufficient. If you do need an interface, reliable USB power may matter more than extra recording features.
When checking hits and balance, you switch between wired headphones and a pair of speakers. The connections and accessible volume controls help you decide what suits your listening setup.
You record parts live or capture new sources. In that case, the inputs you can use simultaneously, monitoring and your DAW settings all matter.
Start by checking whether your current computer output and listening setup are sufficient. Then check the power requirements. Only look at buffer settings and inputs if you’ll be recording live or adding extra recordings.
| What to consider | What to look for | Who it matters more to |
|---|---|---|
| Power without an extra socket | Compare the exact model’s USB requirements with your computer’s port. Audient specifies a minimum of 5 V and 0,9 A via USB 3.0 for the iD4 MKII; Focusrite specifies the same minimum for the Scarlett 2i2 4th Gen. Also check which alternative power supply is permitted. | I have few spare power sockets and want to know whether my computer can power the interface. That’s why around 36% of consumers put USB power at the top of their list of concerns. |
| Listening connections and volume | Check the connection for your wired headphones, the outputs for your stereo pair of monitors, and whether the volume controls suit the way you work. Focusrite specifies one headphone output and two balanced line outputs for the Scarlett 2i2 4th Gen; according to Solid State Logic, the SSL 2+ MKII has two independently controlled headphone outputs. | If I switch between headphones and monitors, I want suitable connections and accessible volume controls. For around 29% of consumers, this listening setup is the top priority. |
| Timing when recording live | Test the buffer setting and drivers with your own DAW project if you record live. Ableton explains that a smaller buffer reduces latency but puts more strain on the CPU. | When I record percussion live, I want to be able to adjust the latency without my project stuttering. Around 21% of consumers put timing when recording live first. |
| Usable recording inputs | Count the sources you want to connect at the same time. According to MOTU, the MOTU M2 has two combination analogue inputs. With the Scarlett 2i2 4th Gen, plugging a jack into the front reportedly disables the corresponding microphone input, according to Focusrite. | I sometimes record extra percussion sources and want to know how many I can connect at once. For around 14% of consumers, the number of usable recording inputs is the main reason for choosing an interface. |
A bus-powered model draws power over USB, but the available power must meet the requirements of that specific model. If there isn’t enough power, you may need to use an alternative power supply.
Before buying, check the model’s specifications, the port available on your computer and which alternative power supplies are permitted.
A separate power supply or cable could take up a spare socket.
According to Ableton, a smaller buffer reduces latency but puts more strain on the CPU. Your DAW project’s settings, drivers and plug-ins can also have an impact.
Test your own project and adjust the buffer to suit live recording and your computer’s workload.
Setting up drivers and fixing stuttering can take extra time.
According to MOTU, the MOTU M2’s RCA outputs mirror its TRS outputs, so they don’t provide an extra independent stereo pair. With the Scarlett 2i2 4th Gen, a jack plugged into the front disables the corresponding microphone input.
Check the signal routing and which connections you can use at the same time.
If you aren’t recording new sources, the listening connections are more likely to determine whether you need an interface than the number of recording inputs.
First, make a note of what you connect now and which sources you actually want to record at the same time.
The Scarlett 2i2 4th Gen is worth considering for a listening setup with one pair of headphones and one stereo pair of monitors. It also has inputs for anyone who wants to record.
The iD4 MKII is an option for a compact listening setup, provided your computer’s USB connection meets its power requirements.
The M2 combines USB bus power, a headphone output, two combination analogue inputs and MIDI, making it an option if you want to connect equipment as well as edit tracks.
The SSL 2+ MKII is worth considering if two people want to adjust their headphone volumes independently or if you need extra line outputs.
The UR22C is an option if you’re combining editing with MIDI, recording or monitoring new inputs.
Not necessarily. First check whether your computer has the wired listening connections and controls you need. If you aren’t recording a new source, you can also disable the audio input in Ableton Live. This advice applies to Live and not necessarily to every DAW.
Choose a bus-powered model only if your computer’s USB port meets that model’s requirements. Focusrite specifies a minimum of 5 V and 0,9 A for the Scarlett 2i2 4th Gen; if USB power is insufficient, you may need a separate power supply.
No. According to Ableton, a smaller buffer reduces latency but increases the load on your CPU, and can cause stuttering. Adjust the setting depending on whether you’re recording live and how demanding your project is.
If a product is faulty, the seller is responsible under the statutory guarantee. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands. For an ordinary online consumer purchase, you generally have 14 days from delivery to change your mind, subject to legal exceptions, as explained by ACM ConsuWijzer.
No. According to the Dutch government information on Business.gov.nl, CE is not a quality mark but a declaration by the manufacturer that the product complies with the applicable EU rules. A CE mark therefore doesn’t prove that an interface records or plays audio better.