Percussionist using multiple microphones
You want to record the kick, snare, overheads or other percussion sources at the same time on separate tracks. Focusrite explains that each microphone used simultaneously needs its own interface input.
For a recording using up to two microphones, an interface with two microphone preamps may be enough. To record multiple percussion sources onto separate tracks, you need a suitable input for every microphone you want to use at the same time. With a drum machine, count its line outputs and the interface’s line inputs. If you plan to expand later via ADAT, make sure you also factor in a compatible external device and the channel capacity at your chosen sample rate.
You want to record the kick, snare, overheads or other percussion sources at the same time on separate tracks. Focusrite explains that each microphone used simultaneously needs its own interface input.
You record with one or two microphones and don’t want to buy a larger interface unless you need more simultaneous tracks. Focusrite also describes simple drum setups using two or three microphones.
You connect a drum machine or similar instrument via its line outputs, and choose your connections based on whether you want a mono, stereo or multi-channel recording. For a stereo drum machine, Focusrite describes using two line connections.
Start by counting the sources you want to record simultaneously on separate tracks. Then check that you have the right type of input, suitable monitoring and any expansion options you may need.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Separate microphone inputs | Count the microphones you want to record simultaneously on separate tracks, then check how many built-in microphone preamps can be used at the same time. | If I want to capture several percussion sources separately at the same time, I need a suitable input for each microphone. Around 31% of consumers rank multi-microphone recording as their top priority. |
| A simple recording setup | Check whether two microphone inputs cover your current recording plans, and decide whether you might want to record more sources simultaneously in future. | For a recording with one or two microphones, I don’t want to choose inputs I don’t need, but I accept that this leaves less room for additional separate tracks. Around 25% of consumers rank simple recording as their top priority. |
| Line inputs for electronic percussion | Count the instrument’s line outputs and check how many line inputs you’ll need to use at the same time. Stereo uses two channels. | If I connect a drum machine, I want the right line connections and enough channels for the recording I have in mind. Around 19% of consumers rank suitable connections for electronic percussion as their top priority. |
| Monitoring while you play | Check how many headphone outputs there are and whether the interface offers direct monitoring or a separately adjustable monitor mix. | If I need a useful headphone mix while playing, I check this before choosing extra recording channels. Around 13% of consumers rank monitoring as their top priority. |
| Expanding via ADAT | Check whether the interface has ADAT. You’ll also need to consider a compatible external preamp or converter, synchronisation and the channel capacity at your chosen sample rate. | If I want to add more inputs later, I need to know what extra equipment and connections I’ll need. Around 12% of consumers rank future expansion as their top priority. |
Digital expansion channels aren’t the same as built-in microphone inputs. The Focusrite Scarlett 18i20 4th Generation has eight analogue inputs, as well as digital connections for expansion.
Compare the number of microphone preamps you can use directly with your microphone setup, and count digital channels separately.
According to Audient, with the Audient EVO SP8, one optical connection carries eight channels at 44,1 or 48 kHz, and four at 88,2 or 96 kHz.
Check the entire signal chain, synchronisation and the number of channels you need at your chosen settings. Expansion also requires a compatible external device and optical connections.
Focusrite warns that phantom power can damage microphones connected with an unbalanced connection, including some older ribbon microphones.
Follow the microphone’s instructions and switch off 48 V when it isn’t needed.
The Scarlett 2i2 4th Generation is designed for smaller setups, while the Scarlett 18i20 4th Generation offers eight built-in microphone preamps and ADAT for larger sessions, according to Focusrite.
Audient describes the EVO 16 as having eight preamps and Smartgain, and the iD48 as having eight preamps and switchable analogue inserts.
According to PreSonus, the Studio 1824c has eight microphone preamps, ADAT and two stereo headphone outputs.
According to Behringer, the U-PHORIA UMC1820 has eight combination XLR/TRS inputs and ADAT.
Yes, a simple two-microphone recording is possible. You won’t get a separate track for every part of the kit, so microphone placement is important.
No. The Focusrite Scarlett 18i20 4th Generation has eight analogue inputs, as well as digital connections for expansion. Check the number of built-in microphone preamps for each model; digital expansion channels aren’t direct microphone inputs.
Check whether your microphone needs phantom power and how to switch it on using the interface. Focusrite warns that phantom power can damage microphones connected with an unbalanced connection, including some older ribbon microphones. Consult the microphone’s instructions and switch off 48 V if it isn’t needed.
According to ACM ConsuWijzer, a standard online consumer purchase usually comes with a statutory cooling-off period of up to 14 days after delivery, subject to legal exceptions. You’re also covered by the statutory guarantee if a product used normally doesn’t meet the standard you could reasonably expect; this isn’t automatically limited to the length of the manufacturer’s guarantee.
No. An audio interface doesn’t change the possibility of causing noise nuisance. The Government of the Netherlands advises trying to agree on arrangements together first, and then suggests contacting your landlord, local council or owners’ association, among others. This doesn’t set a nationwide playing time or noise limit that applies to every home.