Who is this guide for?

Percussionist recording in a reverberant room

You want a usable recording without expecting a new interface to fix the room’s acoustics. Start with the sound of your instrument and microphone placement, then choose enough inputs for your actual set-up. Shure explains how room acoustics and microphone placement affect a recording.

Drummer who wants to record separate tracks

You want to record several drums or other percussion sources at the same time on separate tracks. To work out what you need, count the mic preamps rather than just the advertised total number of inputs.

Solo performer recording with several microphones

You’re playing and adjusting levels at the same time, so being able to set multiple input levels quickly and monitor the sound clearly both matter. Even after automatic gain setting, check the loudest parts of your performance.

What should you look for?

Compact recording with two microphones

Choose this if: you’re happy to record with no more than two microphones at a time and want a straightforward monitoring set-up.

Trade-off: you’ll have fewer mic channels than with a larger drum set-up, and microphone placement and room sound will still make a difference.

A medium-sized set-up with four microphones

Choose this if: you want to record up to four microphones separately at the same time. The Audient EVO 8 and Steinberg UR44C each have four mic preamps.

Trade-off: automatic gain setting doesn’t replace checking the levels of your loudest hits.

A larger drum or percussion set-up

Choose this if: you want to connect eight microphones directly at the same time; the Scarlett 18i20 4th Generation, U-PHORIA UMC1820 and EVO 16 each have eight built-in mic preamps.

Trade-off: more microphones mean a larger set-up and may also pick up more reflections from the room.

What to consider What to look for when buying Who is this important for?
Reducing unwanted room sound Work out which microphone set-up gives you the right balance of direct sound and room ambience. Then choose enough mic inputs for that set-up. If I’m recording in an untreated room, I want to reduce unwanted reflections first and choose the number of inputs afterwards. That’s why around 36% of consumers prioritise room sound.
Enough mic inputs Make a channel list and count the built-in mic preamps. Don’t count line inputs or digital expansion inputs as mic preamps you can use directly. If you want to record several percussion sources at the same time on separate tracks, you’ll need enough independent mic channels. Around 29% of consumers prioritise the number of microphones they can use at once.
Levels and monitoring Check how you set and monitor each input. Test the loudest hits you expect to play, then listen to see whether the monitoring set-up suits your session. If I’m playing and adjusting levels at the same time, I want to be able to follow the recording signal clearly and check my settings. Around 21% of consumers prioritise level control and monitoring.
Computer and expansion Compare the system requirements for the exact model with your computer and DAW. If you plan to expand your set-up, check what additional equipment you’ll need. If you want to connect the interface to your existing computer or already have a specific expansion plan, check that they’ll work together first. Around 14% of consumers prioritise computer compatibility and expansion.

Common buying mistakes

  • Confusing the total number of inputs with mic preamps

    An interface with four analogue inputs doesn’t automatically have four mic preamps. The MOTU M4 has two mic/line combo inputs and two line inputs; the Steinberg UR44C has six inputs and four D-PRE mic preamps.

    For the exact model, compare the number of built-in mic preamps with the number of microphones you want to connect at the same time.

  • Expecting an interface upgrade to treat your room acoustics

    The room and microphone placement affect the sound before it reaches the interface. A different interface won’t remove those reflections.

    First, assess the sound of your instrument, the room and the microphone positions. Shure suggests moving closer to the sound source or using isolation to reduce unwanted room sound; check that the instrument still sounds balanced afterwards.

  • Confusing ADAT expansion with built-in mic preamps

    A digital ADAT connection provides an expansion option; it doesn’t automatically give the interface an extra mic preamp.

    For your initial set-up, count the preamps already on the interface. Treat expansion as a complete signal chain and check what extra equipment and connections you’ll need.

Brands to consider

Focusrite

The Scarlett 18i20 4th Generation is designed for a larger set-up with eight microphones connected directly.

  • Focusrite lists eight mic/line preamps and features such as Auto Gain and Clip Safe.
  • ADAT offers digital expansion, but it won’t fix poor room acoustics and isn’t an extra built-in mic preamp in its own right.

Audient

The EVO 8 has four mic preamps and the EVO 16 has eight. Choose based on how many inputs your set-up needs, not just the EVO name.

  • According to Audient, Smartgain can set the levels of four inputs at once on the EVO 8.
  • Check the levels yourself after automatic setting, especially during the loudest parts.

Behringer

The U-PHORIA UMC1820 is an option if you’re looking for eight built-in mic preamps.

  • Behringer lists eight combo inputs with mic preamps and ADAT.
  • ADAT is a digital expansion connection and is separate from the number of built-in mic preamps.

Steinberg

The UR44C has four mic preamps for a set-up with up to four microphones connected directly.

  • Steinberg lists six inputs and four D-PRE mic preamps.
  • Don’t count the other inputs as extra built-in mic preamps.

MOTU

The M4 suits compact recording with up to two microphones connected directly.

  • MOTU lists two mic combo inputs, two additional line inputs and hardware direct monitoring.
  • The two line inputs don’t replace mic preamps if you want to connect more than two microphones directly.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Can an audio interface remove reverb from my untreated room?

No. Microphone placement, the instrument and the room’s acoustics all affect what gets recorded. Shure recommends experimenting with moving closer to the sound source or using isolation if you’re getting unwanted room sound. Always check that the instrument still sounds right afterwards.

How do I set up an interface with several microphones?

Don’t connect more microphones directly than the model supports. Set the levels for each input and check them using the loudest passages you’ll play. Smartgain and Auto Gain are features on specific models, not a substitute for checking the levels yourself.

Can I play acoustic drums at home as much as I like if I record through an interface?

No. An audio interface won’t make audible percussion quiet. The Government of the Netherlands recommends discussing noise issues with your neighbours and lists your landlord, owners’ association or local council as possible next steps. The agreements or rules that apply will depend on your situation.

Who can help if a product is faulty, and should I buy extra cover?

If a product is faulty, the seller must provide a solution. According to the Government of the Netherlands, there’s no fixed statutory guarantee period in the Netherlands. Extra cover is most relevant if its terms offer more than your statutory rights.

Is CE marking required for an audio interface sold in the Netherlands?

That depends on the EU rules that apply to the specific electrical or electronic product. Where those rules require CE marking, it is mandatory. CE is a conformity marking, not a quality mark for recording performance.