Who is this guide for?

Percussionist in a flat where sound carries

You’re recording one instrument or a small setup and want to distinguish its direct signal more clearly from room noise. Shure explains how microphone distance plays a part; the interface itself won’t remove ambient sound.

Multi-track percussion recording

You want to record several drums or other sound sources at once on separate tracks. As Focusrite explains, recording with multiple microphones requires enough microphones and microphone preamps.

Player with a wide dynamic range

You want to record loud strokes without clipping and monitor the incoming signal through headphones as you play. Features such as input level meters and monitoring options vary by model.

What should you look for?

First, work out how many microphones you want to use at once. Then compare the features for checking recording peaks and monitoring the signal.

What to consider What should you check? Who is this important for?
Room noise and microphone placement Try different microphone positions and listen to the recording through headphones. Placing a microphone close to the source can change the tone. When I record percussion in a room where sound carries, I first want to find a usable balance between the instrument and room noise. Around 36% of consumers prioritise this balance.
Number of microphones Count the built-in microphone preamps and compare that number with how many microphones you want to record separately at once. If you want to record several percussion sources at once on separate tracks, you’ll need enough microphone preamps; around 29% of consumers prioritise this.
Loud strokes Check the meters and input level during your loudest strokes, and see which peak-handling features each model offers. If I play dynamically, I want to be able to check peaks before recording a full take. Around 21% of consumers prioritise avoiding clipping.
Monitoring and connections Check the headphone socket, monitoring function and compatibility with your computer. Consumers who want to monitor through headphones while playing and use the interface with their own computer prioritise this; that’s around 14% of consumers.

Common pitfalls

  • Assuming four inputs means four microphone inputs

    The total number of inputs doesn’t always tell you how many microphones you can connect directly at once. Focusrite specifies that the Scarlett 4i4 4th Generation has two microphone preamps and two additional line inputs.

    Make a note of how many microphones you want to use at once, then compare that with the number of built-in microphone preamps.

  • Expecting the interface to remove room noise

    Sound picked up by a microphone in the room can end up in your recording. Changing the microphone position can alter the balance between direct and ambient sound, but it can also affect the tone.

    Test the position with headphones, and bear in mind that percussion may also be audible outside your recording.

  • Counting ADAT channels as built-in microphone inputs

    The Audient iD14 MKII has two built-in microphone preamps and an optical input for expansion; you’ll need suitable external equipment to use the additional channels.

    Check which inputs are available directly and what external equipment you’ll need for the expansion you’re considering.

Brands to compare

These examples can help you compare models and connection options. Mentioning a brand doesn’t mean every product from that brand is recommended.

Focusrite

The Scarlett 2i2 4th Generation has two microphone preamps, while the Scarlett 18i20 4th Generation has eight built in.

  • Focusrite lists Auto Gain and Clip Safe for the Scarlett 2i2 4th Generation.
  • The Scarlett 4i4 4th Generation has two microphone preamps, despite the number in its model name.

MOTU

The M2 is worth comparing if you’re looking for two microphone inputs, visible level meters and hardware monitoring.

  • MOTU specifies two combination mic/line and instrument inputs, with monitoring for each input.
  • The M2 doesn’t have enough built-in microphone preamps for more than two microphones at once.

Audient

The iD14 MKII combines two built-in microphone preamps with an optical ADAT input.

  • Audient lists direct monitoring and an optical input for up to eight additional channels.
  • You’ll need suitable external equipment for those extra channels; they aren’t built-in microphone preamps.

Behringer

The UMC404HD is worth comparing if you want to connect four microphones at once to separate inputs.

  • Behringer specifies four microphone preamps and four combination XLR/TRS inputs.

PreSonus

The Studio 1824c is an example of an interface with eight built-in microphone preamps.

  • PreSonus lists eight built-in microphone preamps in its product specifications.
  • The number of inputs alone doesn’t determine whether a larger setup is right for your space or recording plans.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a better audio interface make my noisy room sound quiet in the recording?

No, an interface won’t remove the room noise picked up by the microphone. According to Shure, moving a microphone closer to the sound source can improve the balance between direct and ambient sound, but placing it too close can change the tone. So start by assessing the microphone position.

Are four inputs automatically suitable for four microphones?

No, check how many built-in microphone preamps there are. Focusrite specifies that the Scarlett 4i4 4th Generation has two microphone preamps and two additional line inputs.

How can I check my recording setup before making a full take?

Listen through headphones while you test the microphone position, and check the level during your loudest strokes. Focusrite also recommends allowing for players who start playing harder during a recording.

What should I check in the Netherlands if my percussion might disturb the neighbours?

Don’t assume there’s one nationwide time or decibel limit for noise from neighbours. The Dutch government says that municipalities set their own rules, so check the rules that apply to your address. An interface won’t reduce the physical sound of the instrument.

What cooling-off period applies when buying online from a business?

According to the Dutch government, a 14-day cooling-off period applies to distance purchases in many cases, although exceptions and specific conditions may apply. Also check which microphones, cables and any ADAT expansion equipment you’ll need for your setup.