Who is this choice relevant to?

Editor working beside a bright window

You edit existing percussion tracks and want to keep an eye on the controls and levels without distracting reflections. Your desk and screen position also matter: Arboportaal recommends setting up your screen so that your line of sight runs parallel to the window.

Editor who mainly listens on headphones

You listen repeatedly for timing and transients, so what you mainly need is a suitable headphone output and an easy-to-reach volume control. The number of recording channels is not automatically the deciding factor for monitoring this kind of work.

Editor who uses multiple listening routes

You switch between headphones and monitors, or want to give a second listener a different mix. So check which signals can be sent to the outputs, rather than simply counting the connections.

What should you consider when choosing?

One shared monitor mix

Suitable if: you edit existing tracks on headphones and, if needed, a pair of stereo monitors.

Bear in mind: Focusrite says the Scarlett 2i2 4th Gen uses the same signal feed for its headphone and line outputs.

Meters and extra line outputs

Suitable if: you want to see input and output levels on the unit, or need more physical line outputs.

Bear in mind: MOTU specifies a colour LCD and four balanced TRS line outputs for the M4; this doesn’t tell you how easy the meters will be to read where you work.

Separate monitor mixes

Suitable if: your headphones and monitors need different signals, or a second listener needs their own headphone output.

Bear in mind: Focusrite describes separate mixes for the headphone and line outputs on the Scarlett 4i4 4th Gen; two headphone outputs with separate volume controls don’t, by themselves, prove that every mix you want is available.

Recording percussion too

Suitable if: you want to connect live sources as well as edit, and need the inputs while recording.

Bear in mind: direct monitoring lets you hear a live input signal; it doesn’t change the playback route for tracks already recorded in your DAW.

Key consideration What should you check? Who does this matter to?
Controls in daylight Check the position of the meters and controls from your usual working position. Arboportaal recommends positioning your line of sight parallel to the window where possible; an LCD specification is no guarantee that the display will be readable in direct sunlight. If I work beside a bright window, I want to be able to see the meters and controls without distracting reflections. Around 36% of consumers give daylight visibility of controls their top priority.
Monitoring playback Check the headphone connector, monitor connections, volume control and computer compatibility. Focusrite says the Scarlett 2i2 4th Gen uses a shared signal feed for the headphones and line outputs. When editing existing tracks, I want to monitor playback clearly through my headphones or monitors. Around 29% of consumers put playback monitoring at the top of their list.
Independent monitor routes Check whether you can assign a separate mix to each output, rather than just looking for a separate volume control. Focusrite describes separate mixes for the Scarlett 4i4 4th Gen; Solid State Logic specifies two headphone outputs with individual volume controls for the SSL 2+ MKII. If a second listener or my monitors need a different signal, I want to be able to configure the outputs accordingly. Around 21% of consumers put independent monitor routes first when choosing.
Recording other sources later Count the inputs you’ll need to use simultaneously and check what type they are. According to MOTU, the M4 has separate line inputs as well as combo inputs; those line inputs are not extra microphone inputs. If I want to record percussion sources later, I want enough suitable inputs for them. Around 14% of consumers prioritise connections for future recording.

Common pitfalls

  • Assuming an LCD will be readable in sunlight

    A colour LCD specification doesn’t tell you how much reflections from your window will affect visibility.

    Check visibility from your usual working position, and tackle reflections first by repositioning your desk or using blinds.

  • Choosing direct monitoring for existing DAW tracks

    Direct monitoring is intended for the live input signal and doesn’t replace the playback route for a recorded track.

    When editing, start by checking the regular playback outputs. Only consider direct monitoring if you also record live.

  • Confusing the number of outputs with the number of mixes

    According to Focusrite, the Scarlett 2i2 4th Gen shares the signal feed between its line and headphone outputs; Focusrite describes separate mixes for the Scarlett 4i4 4th Gen.

    Check which signals can be assigned to each output on the exact model, rather than simply counting the connections.

Brands worth considering

Focusrite

According to Focusrite, the Scarlett 2i2 4th Gen is an option for one shared monitor feed, while the Scarlett 4i4 4th Gen is designed for separate mixes for headphones and line outputs.

  • Focusrite lists two balanced line outputs and a shared feed for the headphones and line outputs on the Scarlett 2i2 4th Gen.
  • The routing described for the Scarlett 4i4 4th Gen doesn’t automatically apply to every Scarlett model.

MOTU

According to MOTU, the M4 features input and output meters and four balanced line outputs.

  • MOTU specifies a colour LCD and physical controls for the M4.
  • The LCD specification doesn’t confirm that the meters will be easy to read beside a bright window. The extra line inputs are not microphone inputs.

Solid State Logic

According to Solid State Logic, the SSL 2+ MKII has two independent headphone outputs.

  • Solid State Logic lists separate volume controls for the two headphone outputs.
  • Two outputs alone don’t confirm that every DAW mix you want will be available without further configuration.

Audient

The iD14 MKII is worth considering if you’re weighing up headphone power and digital expansion.

  • Audient specifies headphone power for different loads.
  • Check the connection on your headphones and your computer’s USB power against the specifications for the exact model.

RME

According to RME, the Babyface Pro FS is designed for extensive internal mixing and output routing.

  • RME describes TotalMix FX and two different headphone connections for this model.
  • Those extra routing options aren’t necessarily needed to edit a single existing stereo mix.

Joybuy products

Related products will be available soon.

Frequently asked questions

Does direct monitoring make editing existing percussion tracks quicker?

No. Direct monitoring lets you hear a live input signal while recording. For DAW tracks that have already been recorded, use the regular playback route. If you hear the signal twice while recording live, turn off software monitoring to avoid doubling up.

What can you change if the meters or your computer screen are hard to see because of the window?

Where possible, position your line of sight parallel to the window, and use suitable blinds if you’re getting reflections. A colour LCD on an audio interface doesn’t, by itself, prove that the meters will be easy to read in direct sunlight.

Which connections should you check before setting up?

Check the USB connection and computer compatibility against the documentation for the exact model. Also check your headphone plug and monitor connections. For example, the MOTU M4 specifies USB-C, a 6.35 mm headphone socket and balanced TRS line outputs.

How do guarantees and the cooling-off period work when buying online in the Netherlands?

For a consumer purchase, the seller remains responsible for the statutory guarantee if the product doesn’t meet what you could reasonably expect under normal use; this guarantee isn’t automatically limited to two years. According to ACM ConsuWijzer, online purchases generally come with a cooling-off period of up to 14 days after delivery, subject to statutory exceptions.