Who is this buying guide for?

Solo editor who needs to keep things quiet

You edit existing percussion tracks in a shared office and want to listen through well-fitting headphones without turning the volume up unnecessarily. VeiligheidNL explains that a good seal can reduce background noise and sound leakage.

Editor who also records

You correct the timing of existing tracks and sometimes record new parts. Keep DAW playback of edited audio separate from direct monitoring of a live input; Focusrite explains that monitoring both can make the same signal audible twice.

Editor who works with others

You listen back to sessions with someone else or may want to record additional percussion sources later. Consider the number of headphone outputs and recording inputs separately: they don’t tell you the same thing.

What should you look for when buying?

First decide how you want to listen, then consider whether you’ll also record live while working, and finally work out how many inputs you’ll need for any recordings.

What to consider What should you check? Who is this important for?
Quiet, controlled listening Check that the interface has a headphone connection and lets you control the output volume. Well-fitting, closed-back headphones can reduce background noise; VeiligheidNL stresses that this doesn’t mean you should listen at a higher volume. When I’m reviewing existing tracks in the office, I want to listen through well-fitting headphones without turning the volume up unnecessarily. Around 36% of consumers prioritise quiet, controlled listening.
Timing and monitoring Check that the interface is compatible with your computer and DAW. Direct monitoring is relevant for a live input; Focusrite recommends turning off DAW monitoring if you hear the same signal twice. When I’m correcting the timing of existing tracks and sometimes recording, I want to review edits through the DAW and keep that separate from live monitoring. Around 29% of consumers prioritise timing and monitoring.
Listening together Check the number of headphone outputs, whether you can control the volume for each output and, if you need different mixes, whether that specific interface supports them. SSL lists two independent headphone outputs with separate volume controls on the SSL 2+ MKII. When I’m listening to a session with a colleague, I want to know whether we can control the volume separately and whether we might need different mixes. Around 21% of consumers make listening together their top priority.
Recording percussion later Count how many microphone and line inputs you need for each source. MOTU specifies two combo microphone/line inputs and two additional line inputs for the M4. If I want to record several percussion sources at once later, I’ll need enough inputs of the right type. Around 14% of consumers prioritise having room to expand their recording setup.

Common buying mistakes

  • Assuming direct monitoring helps you tighten up existing tracks

    Direct monitoring lets you hear a connected live input; it isn’t the way to review the edited result in your DAW. Focusrite explains the difference in its guide to direct monitoring.

    Listen to timing corrections through DAW playback. Use direct monitoring when recording a new live part.

  • Assuming two headphone connections mean two independent mixes

    Physical connections alone don’t prove that listeners can hear different mixes. Focusrite documents two independent headphone mixes for the Scarlett 18i16 4th Gen.

    For the exact model, check the number of connections, volume controls and supported headphone routing separately.

  • Confusing the total number of inputs with the number of microphones you can record at once

    The MOTU M4 has two combo microphone/line inputs and two separate line inputs. Focusrite lists four microphone preamps for the Scarlett 18i16 4th Gen.

    Map out your future setup by microphone or line source, then count how many simultaneous inputs of the right type you’ll need.

    A planned multichannel recording may require additional suitable preamps or expansion equipment.

Relevant brands to consider

Focusrite

The Scarlett 2i2 4th Gen is an option for a compact workspace; the Scarlett 18i16 4th Gen is more suitable if you want to connect more microphone sources or need independent headphone mixes.

  • Focusrite specifies one 6,35 mm headphone output and two analogue input channels for the 2i2 4th Gen. For the 18i16 4th Gen, the manufacturer lists four microphone preamps and two independent headphone mixes.
  • You don’t need the extra inputs on the 18i16 just to edit existing files. Before planning a drum setup, check how many inputs accept microphones.

Solid State Logic

The SSL 2+ MKII could be a good fit if two people need to listen at once and control the volume separately.

  • Solid State Logic specifies two independent headphone outputs with separate volume controls and four balanced outputs.
  • The SSL 2+ MKII has two recording channels: extra playback routes aren’t extra microphone inputs.

MOTU

The MOTU M4 is worth considering if you want to connect line-level sources, such as a drum machine, as well as edit audio.

  • MOTU specifies two combo microphone/line inputs, two additional line inputs and one headphone output.
  • Not all four analogue inputs are microphone inputs, so check which type of input you need for each source.

Audient

The iD4 MKII is a compact option to consider if headphone playback and a limited number of recording inputs are all you need.

  • Audient specifies headphone performance at different loads.
  • Audient lists a minimum USB power requirement of 0,9 A at 5 V via a USB 3.0 port or later. Check that your computer meets this requirement.

RME

The Babyface Pro FS is a more advanced option to explore if you need specific routing or a portable production setup.

  • RME lists a 6,35 mm and a 3,5 mm headphone connection, each with a different amplifier stage.
  • Two connections don’t prove that there are two independently adjustable headphone mixes. Check the routing separately if this feature matters to you.

Audio interfaces at Joybuy

Related products will be available soon.

Frequently asked questions

Do I need direct monitoring to tighten up existing percussion tracks?

No, not for listening to and editing tracks that have already been recorded through your DAW. Direct monitoring is designed to let you hear a connected live input directly; Focusrite recommends turning off duplicate monitoring if you hear the same signal twice as a result.

How can you stop a noisy office from making you keep turning up your headphones?

Choose well-fitting, closed-back headphones and keep the listening volume at a sensible level. VeiligheidNL explains that reducing background noise and sound leakage can help limit the need to turn up the volume; an audio interface can’t replace a good headphone seal.

Can you use your interface with any office computer without checking anything first?

No. For the exact model, check the USB power requirements, operating system and any drivers needed for your computer and DAW. For example, Audient lists a minimum USB power requirement for the iD4 MKII, while MOTU publishes separate system requirements for the M4.

Are you automatically limited to a two-year legal guarantee in the Netherlands?

No. According to the Dutch government, the Netherlands has no fixed statutory guarantee period: a product must do what you can reasonably expect it to do. If a product is faulty, the seller is your point of contact, and any manufacturer’s guarantee is additional. This applies to consumer purchases and not necessarily to a business purchase made by the office.

Can you always return an interface bought online within 14 days?

No, this doesn’t automatically apply to every online purchase. According to the Dutch government, consumers often have 14 days to change their mind when a purchase qualifies as a distance sale, but there are exceptions and the rules vary depending on the type of purchase. Check who the seller is and whether you’re making a consumer or business purchase.