Who is this choice relevant to?

Solo mixer at a shared desk

You mainly mix existing jazz tracks through a single pair of headphones and want to keep your setup simple. Focusrite and Arturia’s specifications make it easier to compare the headphone and line outputs available on each model.

Mixer who listens back with someone else

You want to listen with another musician and need to know whether each pair of headphones can have its own volume or mix. Solid State Logic and Audient describe different connection and routing options for their models.

Mixer who also records

You’re working on a demo now, but may want to record instruments simultaneously or connect extra monitoring equipment later. Compare the physical inputs and line outputs for this; an optical expansion input is not the same as an extra physical microphone input.

What should you look for?

What to consider What should you check? Who is this important for?
Mixing on one pair of headphones Check whether there’s a headphone output, and look at its volume control and specifications. If you usually mix existing tracks on your own at a shared desk, you’ll want to connect your headphones directly and adjust the volume. Around 29% of consumers put solo headphone mixing first.
Listening together Check the number of headphone outputs, separate volume controls and whether you can route a second mix. If you regularly work with another musician and want to listen back together, check that both connections provide the volume and signal you need. Around 23% of consumers prioritise listening with two pairs of headphones.
Extra listening route Check how many separate analogue line outputs are available and whether they suit your preferred setup. If you want to connect a second listening setup or external equipment, look at the line outputs and routing options; they don’t replace headphone outputs. Around 18% of consumers focus mainly on extra analogue outputs.
Computer connection Check the USB connection, cable and power requirements, as well as the system and driver requirements for the exact model. If you need the interface to work with the computer at your shared desk, check in advance that the connection and power requirements suit your setup. Around 18% of consumers make compatibility with their own computer their top priority.
Recording multiple sources at once later on Count the physical microphone and line inputs. For ADAT, also check what extra equipment you’ll need and how many channels are available at your chosen sample rate. If you want to record several instruments at once later, work out how many sources you’ll need to connect directly and whether you’ll need to expand the setup. Around 12% of consumers prioritise future multichannel recording.

Common buying mistakes

  • Mistaking the total number of outputs for the number of headphone connections

    According to MOTU’s specifications, the MOTU M4 has four analogue TRS line outputs and one headphone output. Line outputs aren’t automatically connections for multiple pairs of headphones.

    Check the headphone connections, their volume controls and any separate routing options individually.

    You may need an additional headphone amplifier or a different interface to connect another pair of headphones.

  • Assuming two headphone connections always provide two independent mixes

    A second connection and a separate DAW signal are different features. The routing you choose can also affect the volume control.

    Check the manual for the exact model and set both listening routes to a low volume before using them.

  • Counting an ADAT input as a ready-to-use microphone input

    An optical input provides an expansion route, but it isn’t the same as extra physical microphone inputs on the interface. The number of channels available also depends on the sample rate.

    Start by counting the analogue inputs available. If you’re expanding the setup, check what extra equipment and settings you’ll need.

    Suitable additional equipment may be needed to use digital expansion.

Brands to compare

Focusrite

The Scarlett 2i2 4th Gen suits a compact setup, while the Scarlett 4i4 4th Gen is worth considering if you need extra analogue connections.

  • According to the official specifications, the Scarlett 2i2 4th Gen has one headphone output and a stereo pair of line outputs. The Scarlett 4i4 4th Gen has extra analogue connections.
  • Check the generation: these specifications don’t automatically apply to older Scarlett models. They’re manufacturer specifications, not an independent sound comparison.

MOTU

The M4 is worth a look if four analogue line outputs and clearly visible level meters suit your setup.

  • MOTU specifies four balanced TRS line outputs.
  • According to MOTU, the M4 has one headphone output. The model specifications don’t prove that the interface will sound better for every jazz mix.

Solid State Logic

The SSL 2+ MKII could be a good fit if two people will be using headphones at the same desk.

  • The manual describes two headphone outputs with separate volume controls. Output B can receive a different mix via DAW outputs 3–4.
  • You’ll need the right routing to get a different mix. Make sure you’re looking at the SSL 2+ MKII, not the SSL 2 MKII or an earlier generation.

Audient

The iD14 MKII is worth considering if you’re looking for two headphone connections, four line outputs or the option to expand via ADAT later on.

  • Audient lists two headphone connections, four line outputs and an optical input.
  • According to Audient, DAW thru bypasses the volume control on that output. Check your preferred cue mix settings and routing before using it.

Arturia

The MiniFuse 2 could suit a compact setup where MIDI and a built-in USB hub would also come in handy.

  • Arturia specifies one headphone output, one stereo pair of outputs, MIDI I/O and a USB hub.
  • The hub function doesn’t give you a second headphone output. Arturia warns that some unpowered USB hubs don’t provide enough power.

Related products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I need lots of microphone inputs to mix jazz tracks that have already been recorded?

Not just to mix existing tracks. First work out how many headphone and line outputs you need. Count the physical microphone and line inputs too if you also want to record several new sources at once.

Can I connect an audio interface through a USB hub?

Check the power and cable instructions for the exact model. Arturia says that some unpowered hubs don’t provide enough power for the MiniFuse 2 and recommends using a powered hub if you connect it via a hub. This is model-specific information, not a general rule for all interfaces.

Can I set up a separate headphone mix on the Audient iD14 MKII without any extra steps?

Audient describes a cue mix route in the iD software for this. Bear in mind that, according to the manufacturer, the DAW thru option bypasses the volume control on that output, which could make the signal unexpectedly loud.

What warranty applies to a purchase as a consumer in the Netherlands?

According to ACM ConsuWijzer, you’re entitled to a product that, under normal use, meets the expectations you were entitled to have of it. If a product develops a fault too soon, the seller must resolve the issue under the terms of the statutory guarantee; a separate manufacturer’s warranty doesn’t replace this right.

Can I return an interface bought online if it isn’t right for me?

For a consumer purchase made online, ACM ConsuWijzer says you generally have a statutory cooling-off period of up to 14 days after delivery. Check the applicable exceptions and return conditions; this is a statutory arrangement, not a trial period offered by a brand.