Who is this relevant for?

Solo speaker in a noisy room

You record short pieces on your own and want to find out how much room noise your microphone picks up. Microphone placement matters more than extra interface features, as Shure explains in its advice on microphone placement and recording technique.

Creator who wants to monitor recording levels

You sometimes speak more loudly or quietly, or record several takes, and want to hear yourself without distracting latency and spot peaks. Focusrite, MOTU and PreSonus describe level or monitoring features for their respective models.

Creator recording with a second speaker

You sometimes record with a guest and need two separate microphone inputs to do so. Focusrite, MOTU and RØDE list two microphone inputs for the models relevant here.

What should you look for when choosing?

Compact interface with one microphone input

Best for: recording one voice when you don’t need to use a second XLR microphone at the same time.

Keep in mind: an instrument input isn’t automatically a second microphone input; also check that the gain is suitable for your microphone.

USB interface with two microphone inputs

Best for: you and a guest recording at the same time, each with an XLR microphone.

Keep in mind: extra inputs, Auto Gain or meters won’t automatically remove background noise.

Production interface with built-in processing

Best for: if you also want onboard controls, recording to storage media or adjustable speech processing.

Keep in mind: a noise gate is no substitute for a suitable recording location or careful microphone placement.

What to consider What to look for Who is this important for?
Room noise Make a test recording and assess the microphone position. Check whether any processing, such as a noise gate, suits your recording needs. If I’m recording in a noisy room, I first want to know how much sound the microphone picks up from the space. Around 36% of consumers say clear speech despite room noise is their main concern when buying.
Levels and monitoring Check whether you can hear yourself through headphones and whether you want to use meters or an automatic level feature. If I vary how loudly I speak, I want to be able to assess the level and hear myself while recording. Around 29% of consumers give level control and monitoring the highest priority.
Number of voices Count the separate XLR microphone inputs, not just the total number of inputs. If I want to record with a guest at the same time, I need a microphone input for each voice. Around 21% of consumers say recording two voices simultaneously is their main concern when buying.
Setup and accessories Check what’s included with the exact version and its USB, power and computer requirements. If I want to put together a working setup, I want to know what I already have and what I still need. Around 14% of consumers give an easy, complete setup the highest priority.

Common pitfalls

  • Confusing a noise gate with a quiet recording room

    A noise gate can reduce sound between spoken sentences, but it doesn’t guarantee that background noise will disappear while you’re speaking. RØDE describes it as part of the processing on the RØDECaster Duo.

    First, make a test recording where you’ll actually be speaking and listen back before choosing any processing.

    Allow extra time to try out the recording location and microphone position, and to record new takes if needed.

  • Reading ‘two inputs’ as ‘two microphones’

    A compact interface may have an instrument input as well as a microphone input. So the total number of inputs doesn’t tell you how many microphones you can connect at the same time.

    Check how many separate XLR microphone inputs the exact model has.

    If you later want to use a second XLR microphone at the same time, you may need a different interface.

  • Assuming an interface is a complete recording bundle

    What’s included varies by version. For example, the standalone Focusrite Scarlett 2i2 4th Gen and the AudioBox GO Creator Bundle described by PreSonus don’t have the same contents.

    Compare what’s included with the exact version against what you already own before ordering.

    You may need to buy a microphone, XLR cable or headphones separately if they aren’t included with the version you choose.

  • Choosing a low-output microphone without checking the gain

    The gain you need depends on the microphone. Shure specifies at least 60 dB for voice-over with the SM7B; this isn’t a general requirement for all microphones.

    Compare the gain requirements of your exact microphone with the interface specifications.

    If the combination doesn’t suit your intended setup, you may need a suitable preamp or a different interface.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is worth considering if you want to connect two XLR microphones or need automatic level control.

  • Focusrite lists two preamps, up to 69 dB of gain, Auto Gain and Clip Safe for this model.
  • According to Focusrite, the standalone 2i2 doesn’t include a microphone; its features won’t make the room quiet.

Audient

The iD4 MKII is a compact option to consider for recording one voice with direct monitoring or loopback.

  • Audient lists one microphone preamp, Monitor Mix and two headphone outputs.
  • The instrument input isn’t a second microphone input; also check the stated USB power requirements.

MOTU

The M2 is worth considering if two microphone inputs and visible meters are important to you.

  • MOTU lists two XLR/TRS combo inputs, separate monitoring and level meters.
  • These specifications don’t mean that background noise will be removed from a recording.

PreSonus

The AudioBox GO is a compact option to consider for one XLR microphone; the Creator Bundle is a separate version.

  • PreSonus lists one mic/line combo input and a mixing control for monitoring on the standalone GO.
  • According to PreSonus, only the separately named Creator Bundle also includes a microphone and headphones.

RØDE

The RØDECaster Duo is worth considering if, alongside two microphones, you also want onboard controls, recording to storage media and onboard processing.

  • RØDE lists two combo inputs, recording to microSD or USB storage, and features including an adjustable noise gate.
  • These manufacturer specifications don’t prove that speech recorded in a noisy flat will be free from background noise.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Will an audio interface remove noise from neighbours or traffic?

No, not on its own. Test the microphone position and recording location. A noise gate can reduce sound between sentences, but it can’t guarantee a recording free from background noise while you’re speaking.

How do I connect an XLR microphone and monitor the recording?

Use an XLR microphone input, adjust the gain with a speech test and listen through the headphone output. Only switch on 48 V if your microphone or intermediate device requires it, and check the relevant manuals first.

Do I need two microphone inputs for one speaker?

No, one microphone preamp is enough for one XLR microphone. If you want to use two XLR microphones at the same time, choose a model with two separate microphone inputs; ‘2-in’ on the packaging alone isn’t enough to tell you.

What should I check about returns and faults after an online purchase?

According to the Dutch government, many online purchases from a business come with a 14-day cooling-off period, although there are exceptions. If a product is faulty, you may be entitled to a free repair or replacement. Check who the seller is and which terms and conditions apply to your order.

Can I publish recognisable recordings of other people’s voices in an introduction?

According to the Dutch Data Protection Authority, a sound recording in which someone is recognisable may be personal data. If the GDPR applies to the processing, you need a valid legal basis; consent is one possible basis, but it isn’t automatically the only one. Whether publication is permitted in your situation depends on the circumstances.