Who is this choice relevant to?

Quiet mixer at a shared desk

If you mainly work on existing folk tracks, you’ll want to listen through headphones with ease and adjust the monitor level. Bax Music, Audient and MOTU outline connection and monitoring considerations for this kind of setup.

Vocal and guitar recorder

If you may want to record vocals and an instrument simultaneously to separate tracks as well as mix, check how many suitable inputs are available at the same time. Focusrite, MOTU and Steinberg provide details on relevant connections and channel layouts.

User who moves between workstations

If you move the interface between computers or workstations, check the USB connection, power requirements and software compatibility for your computer. Audient, MOTU and Steinberg provide model-specific information about connections and power.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Listening quietly and adjusting the volume Check the type of headphone socket, the headphone and monitor level controls, and whether connected headphones can be adjusted independently. If I mix at a shared desk, I want to listen through headphones and adjust the volume easily. Around 33% of consumers say quiet listening is their top purchasing priority.
Recording simultaneously List the sources you want to record at the same time and check whether each channel is suitable for a microphone, line-level or instrument input. Also check whether any connections disable others. If I want to record vocals and an instrument as separate tracks, I need to know which inputs I can use at the same time. Around 25% of consumers prioritise simultaneous recording.
Connections and power Check the operating system and version, available USB port and power requirements. Include any USB hub in your setup too. If I want to use the interface with my own computer or one I use temporarily, I want to know in advance whether the connection and power requirements are suitable. Around 25% of consumers say computer or workstation compatibility is their top priority.
Extra session controls Check whether the exact model offers meters, MIDI and the type of monitoring you need. Distinguish between hardware monitoring and audio routed through the DAW. If I record as well as mix, or connect MIDI equipment, I want the features to suit those sessions. Around 17% of consumers prioritise extra controls, MIDI or monitoring.

What to consider when buying and using

  • Counting every socket as a separate recording channel

    On the Focusrite Scarlett 2i2 4th Generation, using a front-panel jack input disables the corresponding XLR input. This means you can’t necessarily use every visible socket independently at the same time.

    Plan out your recording setup and check the channel layout in the manual for the exact model.

  • Assuming USB-C always provides enough power

    Power requirements depend on the model and the computer port. Audient specifies a minimum of 0.9 A at 5 V through a USB 3.0 port for the iD4 MKII. Focusrite warns that some computer ports may not provide enough power under certain loads.

    Check the power requirements for both the interface and computer before using a shared hub or moving between workstations.

  • Turning up your headphones to drown out background noise

    According to the World Health Organization, the risk of hearing damage is linked to both sound level and listening duration.

    Start at a low volume and avoid listening loudly for long periods. Don’t choose a listening setup based only on its maximum output power.

Brands to compare

Audient

The iD4 MKII is worth considering for a compact mixing setup where you usually use headphones and occasionally connect one microphone and an instrument.

  • Audient lists two headphone sockets and controls for direct monitoring.
  • The model has one microphone preamp. Audient specifies a minimum power supply of 0.9 A at 5 V through a USB 3.0 port; check that your computer can provide this.

Focusrite

The Scarlett 2i2 4th Generation is an option to compare if you want to connect two microphones at the same time and mix through headphones.

  • Focusrite specifies two microphone preamps and one headphone output.
  • Using a front-panel jack disables the corresponding XLR input. So don’t count every socket as an independent channel.

MOTU

The M2 is worth considering if you want physical level meters and MIDI in and out alongside a two-channel interface.

  • The product specifications list a colour display with input and output meters, MIDI in and out, and USB power.
  • MOTU’s specified round-trip latency of 2.5 ms applies at 96 kHz with a 32-sample buffer. This figure won’t necessarily apply with other settings or computers.

Steinberg

The UR22C is an option to compare if you need two inputs, MIDI and a monitor mix control for recording.

  • Steinberg lists two inputs, one Hi-Z option, MIDI in and out, and monitor mix control.
  • Check the exact connections and system requirements for your computer and recording setup.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need two microphone inputs to mix existing tracks?

No, not for mixing alone. Choose the number of inputs based on the sources you want to record at the same time. If you later want to record two microphones separately, check how many microphone inputs can be used simultaneously.

How do I connect headphones and monitors to a Scarlett 2i2 4th Generation?

Focusrite describes connecting headphones with a 6.35mm TRS plug to the headphone output, and monitors to the left and right outputs. You’ll need a suitable adaptor for headphones with a smaller plug. Also check the connections on your monitors.

Why can I hear a delay when recording?

Check whether you’re listening to the live input through direct monitoring or through your DAW. Direct monitoring controls are available on the Audient iD4 MKII and Steinberg UR22C, among others. A manufacturer’s stated latency only applies to the test settings provided.

What can I do if an interface bought in the Netherlands develops a fault during normal use?

Contact the seller. According to the Dutch government, the Netherlands has a statutory guarantee with no fixed legal guarantee period. What you can expect depends, among other things, on the product and the circumstances. A manufacturer’s guarantee does not replace your statutory rights.

What rules must an electrical audio interface meet to be sold in the Netherlands?

According to Business.gov.nl, sellers of electrical or electronic equipment must ensure that products comply with the applicable European rules on safety and interference. CE marking is required when the relevant product legislation requires it for that device. This general information doesn’t confirm whether a particular model complies.