Who is this choice relevant to?

Mixers with few power sockets

If you’re mixing existing tracks on a computer, USB power can mean the interface itself doesn’t need a mains socket. Check that your computer’s port supplies enough power, though: Focusrite specifies a minimum of 5 V at 0.9 A for the Scarlett 2i2 4th Gen.

Mixers switching between headphones and monitors

You want to listen to your mix through headphones and possibly through your existing speakers too. Check that the connections are compatible and find out what happens to the monitor outputs when you plug in headphones.

Producers who also record hardware

If you want to record a synthesiser as well as mix, for example, the number of inputs you can use at once and the right input type matter more than extra connections you won’t use.

What should you look for?

Start with how the interface is powered and how you want to listen to your mix. Then consider whether you need extra inputs or independently controlled listening routes.

What to consider What to look for when buying Who is this important for?
Power without an extra mains socket Check the power requirements of the exact model and what your computer’s port can supply. Remember to account separately for the power needed by monitors and other equipment. If your main aim is to avoid needing a separate socket for the interface, consumers put power supply first; around 36% prioritise this.
Being able to listen to your mix Check the headphone output, stereo outputs and cables, and whether plugging in headphones mutes the monitors. If you want to assess your existing track through headphones or your own monitors, the listening route is crucial; around 29% of consumers prioritise monitoring.
Recording external equipment Count how many sources you want to record at once and check that the connections are suitable for line, microphone or MIDI signals. For consumers who want to record a synthesiser as well as mix, for example, the right inputs matter; around 21% prioritise recording hardware.
Separate listening routes Check the number of outputs, separate volume controls and which signals can genuinely be routed independently on each model. If you need several listening destinations or separate headphone controls, extra routes are worth considering; around 14% of consumers put these first.

Common buying mistakes

  • Assuming USB power will power your whole studio

    USB power can run the interface, but it tells you nothing about the power requirements of connected equipment. Active monitors need their own power supply. Focusrite says that insufficient USB power can affect the operation of the Scarlett 2i2 4th Gen.

    Before buying, make a list of the equipment in your setup and check whether each item needs mains power. For the interface, compare its USB power requirements with the port you plan to use.

  • Confusing direct monitoring with listening to the mix

    Direct monitoring is designed for listening to an input signal. To assess an existing dance track, you’ll want to hear the output from your music software.

    Check the playback route from your DAW. Only consider extra monitoring for recording if you’re also going to record external sources.

  • Assuming more physical outputs mean more independent mixes

    A higher number of connections doesn’t guarantee that you can listen to different signals separately. According to MOTU, the RCA outputs on the MOTU M2 mirror the other outputs; on the Audient EVO 4, Audient says the monitors are muted when you plug in headphones.

    Check how the outputs are mirrored or muted on the exact model, and what routing its software offers.

  • Using an extra USB port as a universal power supply

    Arturia says the USB hub on the Arturia MiniFuse 2 supplies up to 250 mA at 5 V. It isn’t a universal power solution for everything you might connect.

    Compare the power needs of the device you want to connect with the hub’s stated limit.

Brands to consider

Focusrite

The Scarlett Solo 4th Gen is a straightforward USB-powered option for solo use; the Scarlett 2i2 4th Gen offers two recording inputs.

  • Focusrite says the Solo is powered through its USB connection to a computer and has a separate headphone control.
  • Focusrite specifies that the 2i2 4th Gen needs a minimum of 5 V at 0.9 A to work properly. The power available therefore also depends on the USB port you use.

Arturia

The MiniFuse 2 combines USB power with MIDI connections and a built-in USB hub.

  • Arturia says the computer connection powers the interface; the model also has MIDI in and out.
  • According to Arturia, the USB hub supplies up to 250 mA at 5 V. A passive hub placed before the interface may also fail to provide enough power.

MOTU

The M2 is worth comparing if you’re looking for two analogue inputs, stereo outputs and clear level meters.

  • MOTU specifies USB bus power, a headphone output, two balanced line outputs and mirrored RCA outputs.
  • Mirrored outputs aren’t the same as two stereo mixes that can be routed independently. The manufacturer’s general performance claims aren’t an independent comparison.

Audient

The EVO 4 could suit a solo mixer who switches between headphones and existing monitors.

  • Audient says it’s powered via USB and automatically mutes the monitor outputs when you plug in headphones.
  • This automatic muting won’t suit a setup where you need sound from the headphones and monitors at the same time.

Solid State Logic

The SSL 2+ MKII is worth comparing if separate headphone controls or extra analogue outputs matter to you.

  • The manual specifies USB bus power, two independently controlled headphone outputs and four balanced outputs.
  • If you only need one pair of headphones and one stereo mix, you may not use the extra outputs. The stated sound benefits aren’t an independent assessment.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do you need extra audio inputs to mix existing tracks?

No, not just to mix existing tracks. First decide how you want to listen to the mix. If you also want to record external equipment, check the number of inputs you can use at once and the right input type.

Will a USB-powered interface work with any USB hub?

There’s no guarantee. Arturia warns that some passive hubs don’t provide enough power for the MiniFuse 2. Focusrite specifies a minimum of 5 V at 0.9 A for the Scarlett 2i2 4th Gen, so check your computer’s port, the hub and the exact model.

What should you check before plugging in headphones?

Check that the plug fits and what happens to the monitor outputs when you connect your headphones. Audient says the outputs on the EVO 4 are muted automatically.

What are your rights when buying online in the Netherlands if the device isn’t suitable or is faulty?

For an online purchase by a consumer, you generally have a cooling-off period of up to 14 days after delivery, subject to legal exceptions; ACM ConsuWijzer explains this period. The product must also be of satisfactory quality, and the retailer is your point of contact if there’s a fault. The Dutch government says there’s no fixed, general period for statutory guarantees in the Netherlands.

Does an electronic audio interface need a CE marking?

If the device falls under the applicable EU rules, it must carry the required CE marking. The Dutch government lists CE marking as something to check for electronic devices. Check the specific product being offered, as model specifications alone don’t prove that a particular listing complies.