DAW mixer at a single desk
You mix existing electronic tracks and mainly want a practical way to connect your monitors and headphones. Focusrite describes the Scarlett 2i2 4th Generation as a 2-in/2-out interface for this compact setup.
If you’re only mixing existing tracks in your DAW, focus on the connections and volume controls for your monitors and headphones; you won’t need extra recording inputs. If you also record synthesizers or want separate outputs for other equipment or a second listening setup, choose an interface with the connections you need. Check its routing, computer compatibility and DAW support too.
You mix existing electronic tracks and mainly want a practical way to connect your monitors and headphones. Focusrite describes the Scarlett 2i2 4th Generation as a 2-in/2-out interface for this compact setup.
You want to record line-level hardware as well as mix, or connect via MIDI. The number of devices you need to connect at the same time will help determine your choice. Focusrite and MOTU describe models with extra connections for these uses.
You want an additional output route or to use two pairs of headphones, so you’ll need to check the routing available on each model. Focusrite, MOTU and Audient describe various options for extra outputs or headphone connections.
Start with the devices you want to connect now and the routes you’ll actually use. Then decide whether you need extra inputs, outputs or MIDI.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Monitors and headphones | Check the monitor outputs and headphone connection, and how the volume for each is controlled. | I mainly want to listen to existing tracks through one pair of monitors and headphones. Around 33% of consumers prioritise a single stereo mix. |
| Hardware and extra routes | Count the line inputs, independently controllable line outputs and any MIDI ports you need to use at the same time. Also check the DAW routing. According to MOTU, the RCA outputs on the MOTU M4 mirror the TRS outputs, so they don’t provide extra independent routes. | If I want to connect synthesizers or external equipment, the inputs and independent outputs I need matter. Around 27% of consumers prioritise hardware or extra routes. |
| Computer and DAW | For the exact model, check the operating system, USB port, power requirements and instructions for drivers and your DAW. | I want to check in advance that the interface will work with my computer, USB power supply and DAW. Compatibility is the main concern for around 20% of consumers. |
| Recording and monitoring | Check the inputs you need and how direct monitoring and DAW routing work for the way you record. | If I also record parts, I want to know how I’ll hear the incoming signal. Around 20% of consumers prioritise recording and monitoring. |
According to MOTU, the RCA outputs on the MOTU M4 mirror the TRS outputs. So the number of connections alone doesn’t tell you how many independent routes are available.
Check both the physical outputs and the available routing before planning a second listening or effects route.
You don’t need recording inputs to play back existing DAW tracks. The number of connections mainly matters if you want to record external devices.
First, map out what you want to connect now: monitors, headphones and any external devices. Then count the inputs and outputs you need.
The USB power requirements Audient lists for the iD14 MKII apply specifically to that version. Don’t assume they apply to another iD14 model without checking.
Compare the full model name and check the power requirements for the exact version you’re considering.
The Scarlett 2i2 4th Generation is a compact 2-in/2-out option. The Scarlett 4i4 4th Generation is worth considering if you need extra line inputs, line outputs or MIDI.
The M4 is worth considering if you’re looking for analogue connections, MIDI and easy-to-read level meters.
The iD14 MKII could suit you if you’re looking for two headphone connections, extra line outputs or digital expansion via ADAT.
The Studio 24c is a 2-in/2-out option with MIDI, for anyone who also wants to record instruments.
Not just to play back existing tracks. Start with the outputs for your monitors and headphones. Choose suitable inputs if you also want to record a synthesizer, microphone or other external signal.
Compare the connections on your monitors and headphones with those on the exact interface model, and start with the volume turned down. Check the manual to see how to control the outputs you want to use in your DAW or its companion software.
No. Direct monitoring lets you hear the incoming signal. If you want to hear the processed signal while recording, check the routing in your DAW.
According to ACM ConsuWijzer, when you buy a product online you generally have a statutory cooling-off period of up to 14 days after delivery, subject to legal exceptions. ACM ConsuWijzer also says you’re entitled to a product that remains fit for purpose for as long as you could reasonably expect it to.
The Dutch national government states that noise nuisance between neighbours may be covered by the General Municipal By-law (APV) in many municipalities. Check your local council’s rules for your address.