Who might need an interface?

Loop editor using headphones

You mainly edit existing loops while other people work at the same desk. Listening discreetly and being able to adjust the volume easily matter; first check whether your computer’s headphone output already meets your needs.

Maker who also records

As well as loops, you record things such as a guitar, synthesiser or microphone. Choose connections that suit your sources, and check the monitoring and driver support too.

Maker with external equipment

You want to connect MIDI equipment at the same desk or route computer audio to another application. First decide whether those connections are really part of your workflow.

What should you look for when choosing?

Keep using your computer’s audio output

Choose this if: you edit existing loops, don’t record from an external source and are happy using wired headphones with your computer.

Bear in mind: you won’t automatically get physical headphone controls, monitor outputs or extra instrument inputs.

An interface for headphones and monitors

Choose this if: you switch between headphones and connected active monitors at your shared desk, or want to adjust the listening volume directly.

Bear in mind: having separate volume controls doesn’t mean two listeners each get an independent mix; the MOTU M2 and Arturia MiniFuse 2 each have one headphone output.

An interface for recording or extra routing

Choose this if: you record instruments, use external MIDI equipment or want to route computer audio to a separate recording or streaming setup.

Bear in mind: extra inputs, MIDI and loopback add little if all you do is edit existing files; loopback also needs to be routed correctly to prevent feedback.

Ableton points out that a smaller buffer can reduce latency, but puts more strain on the processor. This is generally less important for simply cutting and arranging audio offline than it is for real-time playback or recording.

What to consider What to look for Who should prioritise this?
Discreet listening and volume control Check the number of headphone outputs, the connector size and whether the headphones and monitors can be controlled separately. MOTU and Arturia describe models with dedicated headphone volume controls. If I mainly want to listen discreetly and adjust the volume quickly at a shared desk, I look at the controls. Around 40% of consumers say discreet listening is their top buying priority.
Stable editing and drivers Check support for your operating system and DAW. Ableton says a smaller buffer can reduce latency, but puts more strain on the processor. If I mainly want to play and edit existing loops smoothly, I check the driver and buffer setting first. Around 30% of consumers give top priority to a computer workflow that suits their needs.
Inputs for your equipment Compare the connections on the exact model with your microphones, instruments, monitors and cables. Focusrite notes that on the Scarlett 2i2 4th Gen, connecting a 6.35 mm plug disables the corresponding microphone input. If I want to record an instrument or microphone as well as loops, the input type needs to suit my equipment. Around 20% of consumers put connections for recording external audio at the top of their list.
MIDI or loopback Check whether your equipment needs five-pin MIDI and whether your DAW or streaming application uses loopback. For loopback, follow the model-specific routing instructions to prevent a feedback loop. If I connect external MIDI equipment or want to record computer audio separately, these connections are essential. Around 10% of consumers make MIDI or extra audio routing their top buying priority.

Buying pitfalls

  • Buying an interface just because you edit audio files

    Extra inputs and direct monitoring are mainly useful for recording and connecting equipment. You can also edit existing loops without an external recording source.

    First, try your current wired listening setup and work out what specific problem it doesn’t solve.

    An extra device can also mean more cables and setup work without changing your core workflow.

  • Confusing a separate headphone control with two independent listening setups

    The MOTU M2 and Arturia MiniFuse 2 each have one headphone output. On the MiniFuse 2, the headphone signal follows the monitor output, although its volume can be adjusted separately.

    Check not only the number of volume controls, but also the number of outputs and whether the routing you need is possible.

    If two users need their own headphone mix at the same time, you may need additional equipment.

  • Enabling loopback without checking the recording output

    Focusrite warns that an incorrectly configured loopback route can cause a feedback loop.

    Follow the model’s instructions and mute the loopback recording track or set its output to ‘none’.

Brands to consider

MOTU

The M2 is an example of an interface for one headphone listener who also needs monitor control, two combo inputs and MIDI.

  • MOTU specifies separate volume controls for headphones and monitors.
  • The M2 has one headphone output; separate volume control doesn’t mean two users get their own mix.

Arturia

The MiniFuse 2 is a good example for a compact desk where separate headphone volume control and five-pin MIDI connections are useful.

  • Arturia specifies dedicated headphone volume control, MIDI in and out, and loopback.
  • The headphone output carries the same audio signal as the monitor output; separate volume doesn’t mean a separate mix.

Focusrite

The Scarlett 2i2 4th Gen is an example for anyone who also wants to connect two audio sources or use stereo loopback.

  • Focusrite specifies two XLR and two 6.35 mm connections.
  • Connecting a 6.35 mm plug disables the corresponding microphone input. Focusrite also warns that incorrectly configured loopback can cause a feedback loop.

Steinberg

The UR22C is an example for anyone looking for MIDI in and out and live input monitoring as well as audio editing.

  • Steinberg specifies 2-in/2-out, MIDI in and out, monitor mix and loopback for streaming.
  • The stated maximum resolution of 32-bit/192-kHz is a device specification. On its own, it doesn’t show that existing loops will sound noticeably better.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to buy an audio interface to edit existing loops?

No, not just for that: start with your computer’s headphone output if it works well for you. An interface becomes useful if you need extra inputs, physical volume controls, or a different driver and monitoring workflow.

How do I set up an interface for real-time playback?

Select a driver that suits your operating system and audio software, then test a buffer setting that works reliably. Ableton says a smaller buffer can reduce latency, but puts more demands on the processor.

Do I need MIDI or loopback?

Only if those features are part of your workflow. MIDI in and out are for compatible external equipment; loopback routes computer audio to a recording or streaming setup and must be configured to prevent a feedback loop.

What are my rights if an audio interface I bought online doesn’t work properly?

With normal use, you can expect the product to do what was agreed, according to ACM ConsuWijzer; the seller is responsible for providing an appropriate solution under the legal guarantee. For online consumer purchases, you generally have up to 14 days from delivery to change your mind, subject to legal exceptions.

What rules apply to the device and to other people’s loops?

Electrical or electronic equipment placed on the market in the Netherlands must comply with the applicable EU product rules. Where CE rules apply, CE marking and an EU declaration of conformity are required; Business.gov.nl emphasises that CE is not a quality mark. According to the Dutch government, permission is generally required to make other people’s copyrighted music available to the public or distribute it.