Who needs an audio interface?

Editor working with existing loops

You mainly cut, arrange and review audio files. Before paying for recording inputs, first check whether your computer’s audio output does the job. Ableton also recommends using your built-in sound card to investigate audio problems.

Producer recording instruments

You edit digital audio and record your own instruments too. The number of sources you want to connect at once, and the right type of input, determine which interface suits your setup.

Live loop performer

You record parts while listening to your DAW. Driver support and buffer settings matter when monitoring through software; direct monitoring uses a different signal path.

What should you look for when choosing one?

Start with what your current setup is missing: extra inputs for recording, a suitable monitoring route for playing live, or loopback for capturing audio from your computer.

What to consider What to look for Who is this important for?
Whether you need an interface Test your DAW with your computer’s built-in audio output and your usual headphones or speakers. Then decide which extra feature you need. If I only edit existing loops, I want to know whether my current output works well enough before buying extra hardware. Around 40% of consumers prioritise digital editing.
Number and type of inputs Work out how many signals you record at once and whether you need microphone, line, instrument or MIDI connections. When I record instruments, the inputs need to suit my sources and be usable at the same time. Around 30% of consumers prioritise recording instruments.
Monitoring and latency Check that the drivers support your operating system and adjust the buffer to find a stable balance. A smaller buffer can reduce delay, but it puts more strain on the processor. If I play live and want to hear the sound through my DAW, the driver and buffer matter to my workflow. Around 20% of consumers prioritise live monitoring.
Loopback Check whether the exact model can route computer audio to a virtual input, and how to set this up in your recording or streaming software. When I want to record or stream audio from another computer application, I need a suitable loopback route. Around 10% of consumers prioritise capturing computer audio.

Common pitfalls

  • Buying an interface because audio editing supposedly requires one

    You can use your computer’s audio output for existing files; an interface’s physical inputs only matter when you connect external sources.

    Try your current output with a loop project first, then work out which specific feature you’re missing.

  • Assuming ‘2-in/2-out’ means two identical inputs

    The number of inputs and outputs alone doesn’t tell you which connections are available. For example, Audient lists one microphone preamp and one instrument input for the iD4 MKII.

    Compare the input types and the number of signals you want to record at once with your instruments.

    A stereo instrument may need a different interface or a modified connection setup.

  • Assuming a stated low latency is guaranteed for your entire setup

    The driver, buffer, operating system and DAW processing all play a part. A smaller buffer also puts more strain on the processor.

    Check compatibility with your system and try a stable buffer setting with one of your own projects.

  • Assuming the MiniFuse 2’s USB hub can power anything

    Arturia specifies a maximum of 250 mA at 5 V for the hub.

    Check the power consumption of the device you want to connect.

    Equipment with higher power consumption may need a separately powered connection.

Brands to consider

Focusrite

The Scarlett 2i2 4th Generation is a compact option for editing loops and recording instruments.

  • Focusrite lists two analogue inputs, support for up to 24-bit/192 kHz and stereo loopback for this model.
  • The extra inputs aren’t necessary if you only work with existing audio files. Loopback channels and settings can vary between applications.

MOTU

The M2 could suit a compact setup, with two versatile analogue inputs and MIDI in/out.

  • MOTU specifies two XLR/TRS combo inputs for microphone, line or guitar, plus a headphone output.
  • These are the manufacturer’s specifications; check they’re suitable for your computer setup and instruments.

Arturia

The MiniFuse 2 combines two inputs with MIDI in/out and a USB hub for a workspace with extra equipment.

  • Arturia lists loopback after update 1.5 and a USB hub.
  • According to Arturia, the hub supplies up to 250 mA at 5 V. Check the power consumption of any equipment you connect.

Steinberg

The UR22C is an option if you’re looking for MIDI and a monitor mix function alongside analogue recording.

  • Steinberg lists two inputs and outputs, MIDI in/out and loopback.
  • According to Steinberg, when loopback is enabled it mixes incoming signals with computer playback. Check that this suits the recording channels you need.

Audient

The iD4 MKII suits a compact setup if you want to record a microphone or instrument, among other things.

  • Audient lists one microphone preamp, one instrument input, two line outputs and two headphone connections.
  • Don’t assume that ‘2-in/2-out’ means you have two line inputs for a stereo synthesiser; check the exact input types.

Products on Joybuy

Related products coming soon.

Frequently asked questions

What should you try first if there’s a delay when playing live?

Check the selected audio driver and buffer setting in your DAW. Ableton recommends ASIO on Windows; a smaller buffer can reduce latency, but it puts more strain on the processor.

Is loopback the same as opening an existing loop file?

No. Loopback routes audio playing on your computer to a virtual input for recording or streaming; you import an existing audio file directly into your DAW. Focusrite warns against monitoring loopback on the Scarlett 2i2 4th Generation in a way that creates a feedback loop.

What can you do if your audio keeps stuttering?

Check the supported drivers and firmware, and also test your computer’s built-in sound card. Ableton recommends this test to help find out whether the interface is the cause.

What rights apply when buying online from a business in the Netherlands?

The Dutch government states that online purchases from a business usually come with a 14-day cooling-off period, although there are exceptions. You’re also entitled to a product that’s fit for purpose. The Netherlands has no fixed statutory guarantee period, and the seller is your point of contact if a product is faulty.

What product safety requirements apply to an interface sold in the Netherlands?

The relevant European product rules apply to electrical and electronic equipment. Dutch government guidance lists the required conformity assessment, CE marking and EU Declaration of Conformity as conditions of sale; a product listing alone doesn’t confirm that a specific item meets these requirements.

Can you publish an edited loop containing someone else’s music?

An audio interface doesn’t give you the rights to use music. According to the Dutch government, a copy made for personal use must not be distributed or made public. You may need the creator’s permission for other uses of copyright-protected music.