Who is this for?

Loop editor with no plans to record

You mainly work with existing files and want to check first whether your current playback device and headphones or speakers are enough. Audacity explains how to import and play audio files.

Producer with few power sockets

You want a separate connection for your headphones or monitors, but would rather not need an extra mains adapter for the interface. The power available from the computer port you use is a factor; active speakers may also need their own power connection.

Producer who also plays live

You sometimes record an instrument or stereo source, connect MIDI equipment or play a software instrument. In that case, the number of inputs, any MIDI connections, and your audio buffer and driver settings all matter. Ableton explains that a smaller buffer can reduce latency, but puts more demand on your computer.

What should you look for when buying?

Use your computer’s existing output

Best if: you’re editing existing audio files and can connect your current headphones or speakers without any problems.

Trade-off: you don’t need an extra interface, but you won’t automatically gain extra physical connections for recording.

USB-powered interface

Best if: you want separate headphone or monitor outputs and also want to record one or more sources.

Trade-off: bus power can remove the need for a separate adapter for the interface, but the power available from your computer port still matters.

Interface with MIDI or a USB hub

Best if: you actually want to connect MIDI equipment or a compatible USB peripheral.

Trade-off: extra connections aren’t needed for editing files alone; the Arturia MiniFuse 2’s hub is also limited to 250 mA at 5 V, according to Arturia.

What to consider What to look for when buying Who is this most relevant to?
Avoid buying an unnecessary interface First, test whether your current headphones or speakers and playback device are suitable for importing and listening to files. If I’m only editing existing loops, I want to know first whether my current connection is enough. Around 25% of consumers prioritise avoiding unnecessary hardware.
Power without an extra socket Compare the exact model’s power requirements with those of the USB port or hub you’ll use. Also check separately how active speakers are powered. When spare mains sockets are in short supply, I want to know whether my computer port can power the interface. Around 38% of consumers put reliable USB power first.
The right monitoring outputs Check the connector type, stereo monitor outputs and volume control; also make sure your current headphones or monitors can be connected. If I switch between headphones and monitors, I want to be able to connect and control both conveniently. Around 25% of consumers prioritise suitable monitoring connections.
Recording and playing live Count how many audio inputs you need at the same time and check separately whether you need MIDI connections. Assess buffer and driver settings on your own computer. Anyone who might record an instrument or play a software instrument later will want connections and settings suited to the task. Around 12% of consumers prioritise new recordings or responsiveness.

Buying pitfalls

  • Assuming a USB-C connector means you’ll never need an adapter

    The power available over USB varies between computers and ports. Focusrite states that insufficient power can cause the Scarlett 2i2 4th Gen to show a flashing red USB symbol and produce no audio.

    Check the power specification for the exact model and the USB port or hub you plan to use.

    If there isn’t enough power, this model may need a separate power source and cable.

  • Buying an interface just to open existing audio files

    Audacity doesn’t list a separate recording interface as a requirement for importing and playing audio files. An interface only adds useful connections if you need them.

    Try your existing playback setup first, and only buy extra connections when you have a specific use for them.

  • Assuming the built-in USB hub can power any device

    Arturia lists a limit of 250 mA at 5 V for the MiniFuse 2’s hub.

    Compare this limit with the peripheral’s power consumption and take its connection requirements into account.

    A device that needs more power will require a different, suitable USB power source.

  • Assuming a latency figure tells you whether an interface is right for editing loops

    Latency depends on factors including the buffer, driver, plug-ins and computer workload. When you’re cutting and playing existing loops, live monitoring isn’t automatically a priority.

    Focus on latency if you’re playing live, and test the relevant settings on your own computer. Ableton notes that a smaller buffer can reduce latency, but puts more demand on your computer.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is worth considering if you want two recording channels and plan to use the interface over USB.

  • Focusrite says most computers can provide data and power through a single USB connection.
  • Focusrite warns that insufficient power can prevent this model from producing audio; the optional 5V input may then require a separate power source.

Audient

The EVO 4 is a compact two-channel option for anyone looking for USB bus power and headphone and speaker outputs.

  • Audient lists USB 2.0 bus power, two microphone preamps and a monitor mix function.
  • How well it works in practice also depends on your computer and the connections available.

Arturia

The MiniFuse 2 could be a good fit if you want to use MIDI I/O or a small USB hub as well as audio inputs.

  • Arturia lists headphone and balanced monitor outputs, as well as MIDI connections, for the MiniFuse 2.
  • According to Arturia, the built-in hub delivers up to 250 mA at 5 V, so it isn’t a general-purpose power solution for peripherals.

MOTU

The M2 is a USB-powered option for two recording sources if you also want MIDI or clear level meters.

  • MOTU lists two combination audio inputs, MIDI In and MIDI Out, and USB bus power.
  • A latency figure measured with a specific driver, sample rate and buffer setting isn’t a general guarantee for every computer or use case.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I edit existing loops without an audio interface?

Yes, if your software can import the files and your current playback device and headphones or speakers do the job. An interface is mainly useful if you need extra physical monitoring connections or inputs.

Does USB bus power mean I’ll never need a separate adapter?

No. It also depends on the power supplied by the computer port you’re using. Focusrite states that insufficient power can prevent the Scarlett 2i2 4th Gen from producing audio; this model has a separate 5V input if needed.

Do I need MIDI if I’m only editing existing loops?

Not to import and play existing audio files. MIDI connections only matter if you want to connect a MIDI device; if so, check that your chosen model has the connections you need.

Does direct monitoring reduce latency for a software instrument?

No. Direct monitoring lets you listen to an incoming audio signal directly, but it doesn’t remove the processing time of a software instrument. Buffer, driver, plug-ins and computer workload can all affect software instruments.