Who is this choice relevant to?

Editor of existing loops

You mainly edit material that has already been recorded and want to check first whether your computer’s audio output is up to the job. Musicmaker and Techboer cover differences in features and uses as part of the decision-making process.

Creator adding instruments

You edit loops and record instruments too. Focusrite, Arturia and MOTU describe models with audio inputs; if your equipment uses five-pin MIDI, MIDI in/out is another point to consider.

Listener at a standing desk

You switch between headphones and monitors and want the connections and controls to be easy to reach. Arturia describes separate headphone and monitor controls on the MiniFuse 2; check the physical layout of each model.

What should you look for when choosing?

Start by testing whether your current computer output does the job. Then consider which controls and connections you actually need for your desk setup and any instruments you plan to use.

Consideration What should you check? Who is this important for?
Whether you need an interface Test your existing audio output with your headphones or monitors and the software you use to edit loops. If I only edit existing loops, I don’t want an extra device if my current connection already does the job. Around 40% of consumers prioritise avoiding unnecessary hardware.
Audio and MIDI connections Count the sources you want to record at the same time and check whether your equipment uses USB or five-pin MIDI. If you want to connect external instruments or MIDI equipment as well as working with loops, focus on the inputs and connections you need. Around 30% of consumers say this is their main consideration.
Controls at your desk Check the position of the headphone socket, volume controls, monitor outputs and USB connection on the model you’re considering. If I often switch between headphones and monitors while working, I want to be able to reach the relevant controls from my standing desk. Around 20% of consumers prioritise accessible listening and volume controls.
Loopback Check how the model routes computer audio to your recording software and how to prevent feedback. If you want to record or share computer audio, you may need loopback; it isn’t necessarily required for straightforward editing. Around 10% of consumers name loopback as their main requirement.

Common things to consider

  • Focusing only on the maximum sample rate

    Musicmaker highlights that the features of an audio interface vary depending on how you use it. The maximum resolution alone won’t tell you whether the connections and controls are right for editing loops at your desk.

    First, make a note of your audio sources, listening equipment and preferred controls. Then compare the specifications that matter for your setup.

  • Assuming a USB hub port can power anything

    Arturia specifies a maximum of 250 mA at 5 V for the MiniFuse 2’s hub port. A connected device that needs more power may therefore require a separate power supply.

    Check the power consumption and connection method of your controller or other USB equipment before plugging it into the hub port.

  • Enabling loopback without checking the routing

    A software signal routed back into the system can create an unwanted feedback loop.

    Check the settings for your interface and recording software. Focusrite advises muting the relevant loopback channels in your recording software to prevent feedback.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen may suit you if you want two analogue inputs and separate headphone controls.

  • Focusrite specifies two analogue inputs and two balanced TRS line outputs. Focusrite documents stereo loopback for the fourth generation.
  • Check the loopback settings and don’t assume that every Scarlett model includes this feature. The listed 2i2 specifications don’t mention five-pin MIDI ports.

Arturia

The MiniFuse 2 is an option if you want five-pin MIDI and a USB hub port as well as audio connections.

  • Arturia specifies two inputs, MIDI in/out and separate controls for headphones and monitors.
  • According to Arturia, the USB hub port delivers a maximum of 250 mA at 5 V. Check that this meets the power requirements of the device you want to connect.

MOTU

The M2 may be worth considering if visible level meters, two inputs and five-pin MIDI suit your setup.

  • MOTU specifies a colour display with meters, MIDI in/out and separate monitor and headphone controls. MOTU also describes loopback channels via the driver.
  • Check the current system requirements for your computer. MOTU’s comparisons of speed and quality are manufacturer claims, not independent comparisons for this type of setup.

Audient

The iD4 is a compact option if you mainly connect one microphone and one instrument and want two headphone sockets.

  • Audient lists one microphone preamp, one instrument input and two headphone sockets.
  • This model may not be right for you if you need to use two microphones at once or connect five-pin MIDI to the interface. Claims about improved sound come from Audient itself.

Steinberg

The UR22C is an option if you’re looking for two inputs, MIDI and an adjustable mix of direct input and computer audio.

  • Steinberg lists MIDI in/out, a monitor mix and loopback.
  • The maximum resolution of 32-bit/192 kHz stated by Steinberg doesn’t, on its own, prove a practical benefit when editing existing loops.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do you need to install an interface just to edit existing loops?

Not necessarily: start with your computer’s audio output and editing software. Extra hardware is most useful when you need a specific connection, control or recording feature. For any model you choose, also check that it supports your operating system.

How can you prevent a whistling sound or echo when using loopback?

Check the routing and loopback channels in your recording software. Focusrite advises muting these channels to prevent a feedback loop; the available modes and settings vary by model and software.

Can an extra USB hub and MIDI connections be used interchangeably?

No, they serve different purposes. The Arturia MiniFuse 2 has both MIDI in/out and a USB hub port; according to Arturia, the port is limited to 250 mA at 5 V. Check the connection method and power requirements of your own equipment.

What warranty and cooling-off period apply to an online purchase in the Netherlands?

According to the Dutch government, there is no fixed statutory warranty period for all products in the Netherlands; however, the seller must supply a product that meets the terms of the agreement. For online purchases from a business, a 14-day cooling-off period applies in many cases, subject to statutory exceptions.

Which product regulations are relevant when buying a new interface in the Netherlands?

Electrical and electronic equipment placed on the market in the EU must comply with the applicable EU rules, including those on electromagnetic compatibility and the restriction of certain hazardous substances. According to the European Union, CE marking is required where applicable harmonised rules stipulate it; the mark alone does not prove that an interface is compatible with your computer. Check the product information and required markings for the specific item you’re considering.