Mobile live-session editor
You edit recorded tracks on a laptop and have few power sockets available. You want to listen through headphones or stereo speakers without paying for recording inputs you don’t need.
When editing existing recordings, what matters most is how you listen through headphones or speakers, and whether your computer port can power the interface. If you’re also recording new sources, count the inputs you can use simultaneously. For separate monitor mixes, check that the model has dedicated outputs and routing options.
You edit recorded tracks on a laptop and have few power sockets available. You want to listen through headphones or stereo speakers without paying for recording inputs you don’t need.
You edit existing tracks and sometimes connect a microphone, instrument or stereo line source too. Check how many inputs you need to use at the same time and which monitoring connections suit your setup.
As well as your own monitoring route, you may want to send out a separate analogue signal. Check both the physical outputs and the routing options: counting the connections alone isn’t enough.
Distinguish between playing back existing recordings and recording new sources. Also check that the power supply and monitoring routes suit the equipment you actually use.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Power without an extra socket | Compare the power requirements of the exact model with your computer port and any hub. Check whether an additional 5V power supply might be needed. | If I use my laptop somewhere with few power sockets, I want to know whether the interface will work from that connection. Around 36% of consumers put power without an extra socket first. |
| Listening to existing tracks | Check the headphone socket and volume control, as well as the connection to any active speakers. | When I’m mainly listening back to a live session, I want connections that suit my headphones or speakers. Around 29% of consumers prioritise monitoring. |
| Recording new sources | Make a note of how many microphone, instrument and line channels you use at the same time. Also check whether any inputs are mutually exclusive. | If I want to record sources while editing, I need to know how many inputs are available at once. Around 21% of consumers put additional recording capability first. |
| Separate monitoring routes | Decide whether your headphones and speakers can receive the same mix. If not, check whether the model offers separate, routable channels. | When I need a separate analogue mix or output, independent routes matter more than extra sockets. Around 14% of consumers put separate routing first. |
The connection alone doesn’t tell you whether your computer can supply enough power. Focusrite specifies that the Scarlett 2i2 4th Gen requires a computer port capable of supplying 1.5 A via USB-C; Audient lists specific power requirements for the iD4 MKII.
Compare the requirements of the exact model with your computer port and test your setup before relying on bus power.
If the port doesn’t meet the requirements, you may need a suitable additional power solution, which could still require a power socket.
With the Scarlett 2i2 4th Gen, you may need both mono jack inputs for a single stereo line source. Connecting a jack also disables the corresponding XLR input.
Before buying, map out which sources need to be connected at the same time and which inputs will actually remain available.
If you want to record more sources at once than the model can handle, you’ll need to consider a different connection setup or interface.
According to Arturia, the MiniFuse 2’s headphone output mirrors the monitor output. MOTU likewise describes the M2’s RCA outputs as mirroring the analogue output signal.
If you need different mixes, check the model specifications to see whether the outputs can be routed separately.
The Scarlett Solo 4th Gen is designed for a compact recording and listening setup; the Scarlett 2i2 4th Gen has two simultaneous mono inputs.
MOTU describes the M2 as a two-channel, USB-powered interface with MIDI and clear meters.
The MiniFuse 2 is designed for two recording sources, monitoring and MIDI in a USB-connected setup.
The iD4 MKII is a compact bus-powered option if this model’s microphone and instrument connections suit your setup.
The UR22C is a two-channel alternative worth considering if you also want MIDI and the DSP monitoring described by Steinberg.
No, not just to edit existing recordings. First decide how you want to play them back and listen; only count recording inputs if you’ll also be connecting new analogue sources.
Use input 1 for one channel and input 2 for the other, and set the inputs to line level. Focusrite describes each jack as a mono input; connecting a jack disables the corresponding XLR microphone input.
First check the interface’s power requirements and how much power the port or hub can supply. Arturia warns that a passive hub may not provide enough power for the MiniFuse, so check your model’s requirements and, if possible, try connecting it directly to a suitable computer port.
According to the Dutch government, when you buy remotely online from a business, you’re often entitled to a 14-day cooling-off period. Check the terms and any applicable exceptions; purchases from private individuals aren’t automatically covered by the same rules.
For a consumer purchase, the seller must offer a solution if the product is faulty, according to the Dutch government. The Netherlands doesn’t have a fixed statutory guarantee period; factors including the product’s expected lifespan and the circumstances of the purchase are taken into account.