Who is this choice relevant to?

Editor working with existing live tracks

You mainly edit tracks that have already been recorded and want to monitor them properly without paying for connections you won’t use. Apple Support explains that on a Mac, you can choose the audio output from devices including connected equipment.

Editor recording sources again

You want to record several microphones or other sources simultaneously and separately while editing. Steinberg and Focusrite specify the microphone preamps and line inputs available on each model.

Editor using multiple monitoring routes

For example, you want to use speakers or a separate external audio route as well as headphones. Check both the physical outputs and the available routing options; Steinberg, Audient and Focusrite describe these features for each model.

What should you look for in an audio interface?

First decide whether you’re only editing existing tracks or also recording sources again. Then consider which monitoring routes you need and whether the interface, computer and DAW work well together.

What to consider What should you check? Who is this important for?
The right inputs Count microphones, instruments and line-level sources separately, then compare each total with the number of inputs of the right type on the exact model. If I want to record several sources again at the same time while editing, I need to know whether I can connect each one separately. Around 36% of consumers prioritise having enough suitable inputs.
Monitoring routes Distinguish between screens, speaker pairs and headphones; check the output pairs and software routing. If I want to use speakers or an external route as well as my headphones, I look at the connections and the mix I can send to each route. Around 29% of consumers give monitoring routing top priority.
Computer and DAW Check the operating system, available connection and driver requirements against the exact model; then assign the correct inputs and outputs in your DAW. If I want to keep using my existing computer and DAW, the interface needs to be compatible and work correctly as an audio device. Around 21% of consumers prioritise compatibility.
Features and expandability Make a note of what you use now and any specific expansion you have planned; if you’re considering ADAT, check whether you’ll need compatible digital equipment. I don’t want to pay for connections I won’t use, but I do want to know whether my specific expansion plan is possible. Around 14% of consumers mainly value suitable features without unused capacity.

Which buying mistakes can you avoid?

  • Confusing two screens with two audio mixes

    Your visual workspace doesn’t determine how many audio outputs you need. That depends on the headphones, speakers and separate mixes you want to use.

    Count your monitoring devices and the routes you want, rather than your screens.

  • Mistaking the total number of inputs for the number of microphone inputs

    An interface may combine microphone and line inputs. So the total number of connections doesn’t tell you how many microphones you can connect directly at once.

    Check the type of each input and count the sources you want to record separately at the same time.

    If you later want to record more microphones at once than the available suitable inputs allow, you may need additional compatible equipment.

  • Assuming extra outputs automatically provide separate mixes

    Physical outputs and independently adjustable routing are two different things. According to MOTU, the RCA outputs on the MOTU M4 mirror other outputs and don’t provide extra independent output pairs.

    Check the routing for the exact model and make sure your DAW supports the monitoring setup you want.

Brands to compare

Steinberg

The UR44C is worth considering if you want to record several microphones at once as well as edit.

  • Steinberg specifies four microphone preamps, two headphone connections and a loopback function for streaming.
  • You may not need the extra features to edit existing tracks; also check which mix you can set for each output.

Focusrite

The fourth-generation Scarlett 4i4 could suit a compact workspace, with two microphone preamps and additional line inputs.

  • Focusrite describes this model as offering a separate mix for the headphone and line outputs.
  • The two additional line inputs aren’t two extra microphone preamps; these specifications apply to the fourth generation.

Audient

The iD14 MKII is an option if you’re looking for two microphone preamps, four line outputs and the option to expand digitally via ADAT.

  • Audient lists dual headphone connections, direct monitoring and loopback for the iD14 MKII.
  • You’ll need compatible ADAT equipment to connect more microphones. Check the specifications before buying; those for the MKII don’t automatically apply to other iD14 versions.

MOTU

The M4 is worth considering if you want two microphone/instrument inputs alongside separate line inputs and outputs.

  • MOTU specifies four balanced TRS line outputs and one stereo headphone output.
  • According to MOTU, the RCA outputs mirror other outputs; they don’t provide extra independent output pairs.

Joybuy products for this use

Related products coming soon.

Frequently asked questions

Do I need two audio outputs because I have two screens?

No, not just because you have two screens. Choose your outputs based on the headphones, speakers and separate mixes you want to use. Also select the intended audio device on your computer and in your DAW; according to Apple Support, the screen and audio output settings described apply specifically to Mac.

What should I check during the initial setup?

Check the connection and software requirements for your exact interface, then assign the correct audio inputs and outputs in your DAW. In its Cubase guide, Steinberg recommends checking the driver and buffer settings: a smaller buffer reduces latency but puts more strain on your computer.

How should I maintain the interface?

Follow the manual for the model you’ve bought. For the M series, MOTU says to disconnect the device before cleaning and use only a dry cloth; this instruction doesn’t automatically apply to other models.

Who can help if my interface, bought in the Netherlands, isn’t working properly?

If you’ve bought the product as a consumer in the Netherlands, you can contact the seller if something goes wrong. According to the Dutch government, there’s no fixed statutory guarantee period in the Netherlands; what you can reasonably expect from a product depends on the product and the circumstances of the purchase.

Can I publish an edited recording of a live session without permission?

Not simply because you edited the audio yourself. According to the Dutch government, you need the creator’s permission to use copyright-protected music. If an organisation processes information about identifiable people, it must have an applicable legal basis under the GDPR, according to the Dutch Data Protection Authority. Consent is one possible legal basis, but not automatically the only one.