Which audio interface is right for you?

Editing existing live tracks

You’ve already recorded the session and mainly need suitable playback and listening outputs. Extra microphone inputs aren’t automatically a deciding factor. Thomann Netherlands highlights the number of inputs and how they connect as important considerations for live studio musicians.

Planning future multitrack recordings

You want to record several microphones at once in a future session and edit each source separately afterwards. Count the built-in microphone preamps separately from channels available only through compatible external equipment and ADAT.

Editing and recording overdubs

You’re editing a live session and also recording parts at home. Check how you can monitor the new input signal alongside the existing tracks, and whether the interface is compatible with your computer and recording software.

What should you look for?

When editing at home, extra inputs matter most if you also want to record new sources simultaneously. For overdubs and listening, the signal routing options are also important.

Compact two-input interface

A good fit if: you mainly edit existing tracks or record no more than two sources at once.

Bear in mind: this number of inputs won’t be enough for a future session with more than two microphones recorded on separate tracks.

Desktop interface with extra routing or expansion

A good fit if: you want different listening mixes or plan to expand later with compatible external equipment.

Bear in mind: digital expansion channels aren’t built-in microphone inputs; for example, the Audient iD14 MKII has two built-in microphone preamps.

Interface with eight built-in microphone preamps

A good fit if: you want to record several microphones simultaneously as separate tracks in a future live session.

Bear in mind: extra inputs matter less if you’re only editing existing material; the number of ADAT channels may depend on the sample rate and configuration.

Priority What to look for Who should consider this?
Separate live tracks Count the built-in microphone preamps separately from the ADAT channels, and check the channel capacity at your chosen sample rate. Focusrite explains that the number of available ADAT channels may decrease at higher sample rates. If I want to record several microphones simultaneously onto separate tracks in a future live session, I’ll count the built-in inputs and expansion separately. Around 36% of consumers make separate live tracks their top buying priority.
Listening routes Check whether the headphones can have their own mix, or only their own volume control. Focusrite describes separate mixes for headphones and line outputs on the Scarlett 4i4; Arturia says that the MiniFuse 2 headphone output mirrors the monitor output. If I want to hear different signals through speakers and headphones, I’ll look for independent routing. Around 29% of consumers make listening routes their top priority.
Monitoring overdubs Check for direct monitoring, the balance between live inputs and computer playback, and whether you want to hear software effects while recording. If I’m recording a new part while the existing session plays, I want to monitor both signals clearly. Around 21% of consumers cite overdub monitoring as their top buying priority.
Computer and software For the exact model version, check support for your operating system, connection and required software features. MOTU lists macOS 12 or later among the requirements for the M2. If I want to keep using my current computer, I’ll first check that the interface and the features I need will work with it. Around 14% of consumers make computer compatibility their top buying priority.

Common buying mistakes

  • Counting every listed input as a built-in microphone input

    ADAT channels require compatible external equipment and aren’t the same as built-in microphone preamps. Audient lists two built-in microphone preamps and up to eight additional channels via ADAT for the iD14 MKII; Focusrite lists eight built-in microphone preamps for the Scarlett 18i20.

    Make a note of how many microphones you want to connect directly and how many channels are available only through expansion.

  • Mistaking a second volume control for a second monitor mix

    A separate volume control doesn’t automatically mean the headphones receive a different signal. Arturia says that the MiniFuse 2 headphone output mirrors the monitor output; Focusrite describes independently adjustable mixes for the Scarlett 4i4.

    Decide whether you need a different mix or just a separate volume control for your headphones.

  • Assuming the number of ADAT channels stays the same at every sample rate

    For Scarlett models with ADAT, Focusrite explains that fewer channels may be available per optical connection at higher sample rates.

    Compare the number of tracks you need with the documentation for your model, ADAT mode and sample rate.

Relevant brands to consider

Focusrite

The Scarlett range spans the compact 2i2, the more flexible 4i4 with extra routing options, and the 18i20 for sessions with more microphones.

  • According to Focusrite’s model specifications, the Scarlett 4i4 has two microphone preamps and separate mixes for headphones and line outputs.
  • Focusrite lists eight built-in microphone preamps for the Scarlett 18i20.
  • The 4i4 isn’t a substitute for an interface with eight built-in microphone channels if you need to use all eight at once.

Behringer

The UMC1820 is worth considering if you need several built-in microphone inputs and more than one listening option.

  • Behringer lists eight microphone preamps and two headphone outputs.
  • The manufacturer describes ADAT expansion with eight extra channels at 44,1 or 48 kHz, which requires an external preamp.
  • These model specifications aren’t an independent assessment of recording quality.

Audient

The iD14 MKII is designed for a smaller desktop setup, with the option to expand digitally later.

  • Audient lists two built-in microphone preamps, direct monitoring, loopback and an ADAT input for up to eight additional channels.
  • The additional ADAT channels require compatible external equipment; they aren’t built-in microphone inputs.

MOTU

The M2 is a compact two-channel option; the M4 adds analogue line inputs and extra line outputs.

  • MOTU lists two microphone, line or instrument inputs for the M2.
  • According to MOTU, the M4 has two of these inputs, plus two analogue line inputs.
  • The M4’s extra line inputs aren’t additional built-in microphone preamps.

Arturia

The MiniFuse 2 is a compact option if two inputs and a MIDI connection suit your home setup.

  • Arturia lists two inputs, two outputs and MIDI I/O.
  • According to Arturia, the headphone output mirrors the monitor output, so its separate volume control doesn’t automatically provide a separate mix.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need eight inputs to edit an existing live session?

No, not just to edit tracks that have already been recorded. Eight built-in microphone preamps are mainly useful if you want to record several microphones separately at the same time in future; for existing sessions, also consider listening routes and computer compatibility.

Can I use ADAT expansion without an extra device?

You’ll need compatible external equipment, such as a preamp, to use additional ADAT channels. Check the sample rate and configuration too: Focusrite explains that fewer ADAT channels may be available at higher sample rates.

What should I set up to record an overdub alongside the existing session?

Select the right input and output in your recording software, then decide whether you want to monitor the new part directly through the interface or through the software. The UMC1820 describes mixing live inputs with computer playback; the controls vary by model.

What rights do I have if I buy online and the product is faulty?

For an eligible online consumer purchase from a business, the Dutch government generally provides a 14-day cooling-off period. In the Netherlands, you’re also covered by statutory guarantees, with no fixed statutory guarantee period; if a product is faulty, contact the seller. How this applies to you depends on the circumstances of the purchase and the fault.

Which product markings are relevant for audio equipment?

Check the markings for the specific model. According to Your Europe, the European Union’s information portal, CE marking applies only to products covered by harmonised EU rules that require it; CE isn’t an independent quality mark. The EU also describes the WEEE marking, showing a crossed-out wheeled bin, for electrical and electronic equipment on the EU market.