Who is this choice relevant to?

Mixer working with existing jazz tracks

You want to assess an existing recording in your home office using monitors or headphones. Listening connections and controls matter more than a large number of recording inputs. This reflects the differences between uses described by Interface.nl.

Creator who overdubs parts

You mix, but also occasionally record vocals or instruments. Choose the number of physical inputs according to what needs to be recorded at the same time, and check the monitoring function while recording. Focusrite and MOTU describe models with different types of inputs.

Recorder of small jazz sessions

You want to capture several sources separately during a single performance. When comparing channels, look at the difference between analogue line inputs, microphone preamps and digital expansion. Audient describes ADAT expansion for the iD14 MKII.

What factors should guide your choice?

First decide whether you’ll mainly mix existing tracks or record new sources at the same time. Then choose based on the listening setup you want, the type of input you need and how the interface connects to your computer.

What to consider What should you check? Who is this for?
Your preferred listening setup Monitor and headphone outputs; whether both receive the same mix. If I’m mainly assessing existing stereo mixes, I want to know which listening setup I actually need. Around 36% of consumers make monitoring their top priority.
Sources to record simultaneously For each source, note whether you need a microphone, line or instrument input. If I want to record several parts separately at the same time, I count the suitable physical inputs for each source type. Around 29% of consumers prioritise inputs for simultaneous recording.
Headphones and monitoring Check the number of connections and the monitoring controls for recording. If I use headphones during an overdub or listen with someone else, I want to know what monitoring and mix routing are available. Around 21% of consumers make this their top priority.
Computer compatibility Compare the operating system, USB port, power requirements and necessary drivers. If I want to connect the interface to my own computer, I check the model’s power and software requirements in advance. Around 14% of consumers prioritise compatibility.

Common buying pitfalls

  • Mistaking four inputs for four microphone inputs

    According to Focusrite and MOTU, the Focusrite Scarlett 4i4 4th Gen and MOTU M4 each have two microphone preamps alongside two additional line inputs. So the total number of inputs doesn’t tell you how many microphones you can connect directly.

    Before comparing interfaces by channel count, make a note of the input type required for every source you want to record at the same time.

    If you later want to use more microphones at once, you may need suitable additional hardware.

  • Assuming an extra headphone socket means a separate mix

    A physical connection on its own doesn’t tell you how the audio is routed. Focusrite states that the headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal.

    If a musician needs to hear something different from the person listening on the monitors, check the routing documentation for that exact model.

  • Counting ADAT channels as built-in analogue inputs

    According to Audient, the Audient iD14 MKII has two microphone preamps and an optical ADAT input; the additional channels require compatible external equipment.

    First compare the connections on the interface itself, and plan for any expansion separately.

    ADAT expansion requires a compatible external digital preamp or converter.

  • Checking only the USB connector

    A compatible connector doesn’t guarantee that the power supply and software requirements will also suit your computer. For bus-powered operation of the iD14 MKII, Audient specifies a minimum of 0.9 A at 5 V through a USB 3.0 port.

    Compare the port, available power and current system and driver requirements with the documentation for your chosen model.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is a compact two-channel option; according to Focusrite, the Scarlett 4i4 4th Gen adds two line inputs and separate output mixes.

  • Focusrite lists two balanced line outputs and one headphone output for the Scarlett 2i2 4th Gen.
  • On the Scarlett 2i2 4th Gen, the headphone and line outputs share the same signal; the differences listed here don’t automatically apply to other Scarlett models.

MOTU

The M2 is an option with two analogue inputs; according to MOTU, the M4 adds two analogue line inputs.

  • MOTU lists input monitoring and direct monitoring controls for the M2.
  • The M4’s two additional inputs are line inputs without built-in microphone preamps. Check the system requirements for the exact model.

Audient

The iD14 MKII is suited to a workspace with two microphone preamps where ADAT expansion or extra line outputs are desired.

  • Audient lists four line outputs, two headphone connections and an optical ADAT input for the iD14 MKII.
  • ADAT expansion requires compatible external equipment. For bus-powered operation, Audient specifies a minimum of 0.9 A at 5 V via USB 3.0.

Arturia

The MiniFuse 4 is worth considering if four inputs and two physical headphone connections are important to you.

  • Arturia lists four inputs, four outputs and two headphone connections for the MiniFuse 4.
  • The number of headphone connections doesn’t confirm that two separate mixes can be set independently.

RME

The Babyface Pro FS is worth considering if you’re looking for more extensive routing and might later expand with an external ADAT converter.

  • RME describes expansion for the Babyface Pro FS in combination with an external ADAT converter.
  • That expansion doesn’t mean all the additional analogue connections are built in.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do you need lots of microphone inputs to mix existing jazz tracks?

No, not for mixing alone: choose recording inputs according to the sources you want to capture at the same time. According to Focusrite and MOTU, the Scarlett 4i4 4th Gen and MOTU M4 each have two built-in microphone preamps; the other two analogue inputs are line inputs.

What should you look for when connecting an interface in a home office?

Check the type of monitor and headphone connections, the USB port, the power supply and the system requirements for your chosen model. For bus-powered operation of the iD14 MKII, Audient specifies a minimum of 0.9 A at 5 V via USB 3.0; this model-specific requirement doesn’t automatically apply to other interfaces.

Is direct monitoring the same as loopback?

No. Direct monitoring lets you hear a connected input; loopback sends audio from your computer back to recording software. Focusrite describes loopback for recording computer output, while MOTU lists input monitoring for the M2. Check separately how DAW monitoring works with effects.

What should you check for computer compatibility?

Compare the specific model’s system requirements, available USB port, power supply and necessary drivers with your computer. For the iD14 MKII, Audient specifies a minimum of 0.9 A at 5 V via USB 3.0 for bus-powered operation.

What cooling-off period and product rights apply to an online purchase in the Netherlands?

According to the Dutch government, when you buy as a consumer you’re entitled to a product that works properly, and the Netherlands has no fixed statutory warranty period. For many online distance purchases from a business, you have 14 days to change your mind, although there are exceptions. An additional manufacturer’s warranty doesn’t replace your statutory rights.