Who is this guide for?

Jazz mixer working with existing tracks

You mix pre-recorded tracks at a small desk and want to connect and control your monitors or headphones with ease. Extra recording channels aren’t a priority for you.

Headphone mixer with limited space

You have little room for speakers and do most of your mix checking on headphones. Pay attention to the connection, the controls and the requirements of your headphones.

Musician looking to expand a demo

You also want to record instruments or use external equipment. The number of sources you can connect at once and the available output routes are key considerations.

What should you look for?

Start with your listening setup, then work out how many sources you want to record at once. Extra outputs are most useful when you need a separate mix or another signal route.

Consideration What to look for when buying Who is this important for?
Reliable listening at a small desk Check that the monitor outputs suit your speakers and that the interface fits comfortably on your desk. Also consider where you’ll place your monitors. If you want to assess an existing mix through monitors, you’ll need to know whether they can be positioned well in your listening space. Around 40% of consumers prioritise their listening setup.
Mixing on headphones Check the plug size, the headphone level controls and whether you need a separate headphone mix. If you have little room for speakers, you’ll want to connect and use your own headphones comfortably. Around 30% of consumers prioritise headphone listening.
Recording new jazz tracks Count how many microphones, instruments or other sources you want to record at once, and check which types of inputs you’ll need. If you want to record several sources at once during your next demo session, you’ll need enough suitable inputs. Around 20% of consumers prioritise the option to expand.
Separate mixes or external equipment Check whether the outputs can be controlled independently and can receive the DAW signals you need. If you want to use a separate monitor mix or an external effects route, the actual signal routing matters. Around 10% of consumers focus on having this extra route.

Common buying mistakes

  • Buying more inputs to improve the sound of existing tracks

    Inputs are for new sources. When playing back existing tracks, your monitoring outputs and monitor setup are more relevant. Genelec points out that the room and speaker placement also affect what you hear.

    First, count the sources you want to record at once and decide whether you need another output route in addition to the main stereo pair.

    Unused connections won’t improve your existing mix, and additional routes may also mean extra cables.

  • Assuming every extra output gives you an independent mix

    According to MOTU, the RCA outputs on the MOTU M2 mirror the analogue output. Focusrite states that the line and headphone outputs on the Scarlett 2i2 4th Gen share the same audio signal.

    Look in the model specifications for separately assignable DAW outputs, not just the number of connections.

    If you later need independent routing, you may need a different interface.

  • Taking USB-C or two headphone sockets as a guarantee of full compatibility

    Audient lists specific USB power requirements for the iD4 MKII. Having two headphone sockets doesn’t in itself mean you’ll get two independent headphone mixes.

    Check the manual for the exact model, your computer’s port and power supply, and the signal routing you want to use.

Brands and models to consider

Focusrite

The Scarlett 2i2 4th Gen suits a compact stereo setup; the Scarlett 4i4 4th Generation is worth considering if you need separate mixes and extra line outputs.

  • Focusrite specifies separate level controls for the monitors and headphones on the Scarlett 2i2; both outputs share the same audio signal.
  • According to Focusrite, the headphone and line outputs on the Scarlett 4i4 can be assigned separate mixes.

MOTU

The M2 is designed for anyone looking for a pair of stereo monitor outputs and visible meters on the unit.

  • MOTU lists two microphone, line or instrument inputs, plus a colour display with input and output meters.
  • According to MOTU, the RCA outputs mirror the analogue output, so they don’t provide an independent extra stereo pair. The stated dimensions are 19,05 × 10,8 × 4,5 cm; check that it will fit on your desk.

Audient

The iD4 MKII suits headphone-focused mixing and a small amount of additional recording, for example with one microphone and one instrument.

  • Audient lists two headphone sockets, one microphone preamp and one instrument input.
  • This model isn’t suitable for recording two microphones at once. Also check Audient’s stated USB power requirements for your computer.

Solid State Logic

The SSL 2+ MKII may suit a setup with several listeners or additional output routes.

  • Solid State Logic lists four balanced outputs and two headphone outputs with separate volume controls.
  • These connections are most useful if you’ll actually use them; extra routes aren’t automatically necessary for a single stereo mix.

Steinberg

The UR22C is a compact two-channel option if MIDI connections or the monitor mix it offers are useful for your setup.

  • Steinberg lists two inputs and outputs, MIDI in and out, and a monitor mix.
  • These extra features won’t automatically improve your mix if you’re only listening to existing audio tracks through a single stereo pair.

Related products

Related products coming soon.

Frequently asked questions

Do I need more than two inputs to mix existing jazz tracks?

Not just to play back those existing tracks. Choose the number of inputs based on what you might want to record simultaneously in future, and consider the outputs separately for your monitors and any monitoring or effects route.

How do I connect the interface without getting a misleading impression of the mix?

Connect suitable monitors to the designated line outputs and position them symmetrically in relation to your listening position. Genelec explains that the room and monitor placement affect what you hear; switching to a different interface won’t automatically correct these factors.

What is direct monitoring for?

When recording a new part, direct monitoring lets you hear the input signal through the monitoring output with very little delay, according to Focusrite. It doesn’t offer a separate benefit when mixing pre-recorded tracks.

Who should I contact if an interface bought online develops a fault?

For a consumer purchase in the Netherlands, you can claim your statutory guarantee from the seller. ACM ConsuWijzer explains that the seller must fix a fault free of charge if the product breaks sooner than could reasonably be expected under normal use. Online purchases generally also come with a 14-day cooling-off period after delivery; exceptions and conditions may apply.

Does an audio interface need a CE mark to be sold in the Netherlands?

If an audio interface is covered by applicable harmonised EU product rules, it must comply with them and carry the required CE mark before being placed on the EU market. The European Commission explains that the manufacturer is responsible for assessing conformity. A CE logo in an advert alone doesn’t confirm that a specific listing meets all applicable requirements.