Who is this buying guide for?

Quietly mixing existing tracks

You’ve already recorded your tracks and want to mix on headphones in a quiet home studio. Focusrite specifies a dedicated headphone volume control for the Scarlett 2i2 4th Gen, while Audient lists two headphone connections on the iD4 MKII.

Recording vocals and guitar

You also mix new recordings and want to connect vocals and guitar. Focusrite and MOTU each specify two microphone inputs for their Scarlett 2i2 4th Gen and M2; just check how many of the chosen interface’s inputs can be used at the same time.

Separate monitor routes needed

You want to send a separate mix to headphones or a line output as well as your own stereo mix. Focusrite describes separate mixes for the headphone and line outputs on the Scarlett 4i4 4th Gen.

What should you look for when choosing?

Start with your monitoring setup, then count the recording inputs you’ll need to use at the same time, and finally check the connection to your computer.

What to consider What should you look for? Who is this important for?
Quiet headphone mixing Check the type of connection, the volume control and whether your headphones are compatible. Two connections don’t automatically mean you can create two separate mixes. If I’m mixing existing tracks without speakers, I want to connect my headphones easily and adjust the volume. Around 36% of consumers say quiet mixing is their top priority.
Recording vocals and guitar at the same time For each source, note whether you’ll use an XLR microphone or an instrument jack, and check whether plugging in a jack disables an XLR input. If I want to record vocals and guitar at the same time, the inputs need to suit my choice of microphone and instrument. Around 29% of consumers prioritise inputs that can be used simultaneously.
Connecting to your computer Check the exact model’s requirements against your operating system, DAW, USB port and available power. Audient specifies a minimum of 0.9 A at 5 V via USB 3.0 for the iD4 MKII. If I want to use the interface with my existing computer and software, I check the system and power requirements in advance. Around 21% of consumers put this compatibility first.
Separate monitor or line mixes Check whether the headphone and line outputs share the same signal feed. Focusrite describes separate mixes for the headphone and line outputs on the Scarlett 4i4 4th Gen. If I want to send a musician or external equipment a different mix, I need independent routing. Around 14% of consumers say separate monitor routes are their top priority.

Common buying mistakes

  • Assuming two inputs means two microphone inputs can be used at once

    The Audient iD4 MKII has one microphone preamp. On the Focusrite Scarlett 2i2 4th Gen, plugging in a jack disables the corresponding XLR input.

    Before you choose, map out which microphone and instrument connections you’ll need to use at the same time on each channel.

Relevant brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for two suitable recording sources, while Focusrite says the Scarlett 4i4 4th Gen offers separate mixes for the headphone and line outputs.

  • Focusrite specifies separate volume controls for the headphones and main output on the Scarlett 2i2 4th Gen.
  • The line and headphone outputs on the Scarlett 2i2 4th Gen share the same signal feed. Plugging in a jack disables the corresponding XLR input.

Audient

The iD4 MKII is designed for a compact setup with one microphone preamp and one instrument input.

  • Audient specifies two headphone connections and direct monitoring.
  • The iD4 MKII has one microphone preamp. Two headphone connections don’t automatically mean two independent mixes. Audient specifies a minimum of 0.9 A at 5 V via USB 3.0.

MOTU

The M2 has two combo inputs and is designed for a compact recording and mixing setup.

  • MOTU specifies two independently controlled microphone inputs and clear input and output meters; the M2 also has MIDI.
  • The RCA outputs mirror the TRS outputs, so they don’t provide a separate monitor route. Check the system requirements for your computer.

PreSonus

The Studio 24c is designed for two recording sources and has a physical mix control for direct input monitoring.

  • PreSonus specifies two microphone, instrument or line inputs, balanced monitor outputs and MIDI.
  • Direct input monitoring doesn’t in itself mean that headphone mixes can be routed independently.

Arturia

The MiniFuse 2 combines two combo inputs with MIDI and a built-in USB hub.

  • Arturia lists one headphone output and a USB hub.
  • According to Arturia, a device connected to the hub must not draw more than 250 mA, so check the power consumption of any connected equipment.

Audio interfaces at Joybuy

Related products will be available soon.

Frequently asked questions

Do you need two microphone inputs if you’re only mixing existing tracks?

No, you don’t need two microphone inputs to play back and mix tracks that have already been recorded. Choose extra inputs based on what you might want to record at the same time in future; the Audient iD4 MKII has one microphone preamp, while MOTU specifies two for the M2.

What does direct monitoring do when recording vocals or guitar?

According to Focusrite’s manual, direct monitoring sends the input signal to the monitor outputs. If you want to hear effects applied in your DAW, also check your software’s monitoring settings; assess an existing mix through the playback route.

What should you check before connecting, and when listening for long periods?

Check the exact model’s port, power and software requirements before connecting it. Audient specifies a minimum of 0.9 A at 5 V via USB 3.0 for the iD4 MKII; Arturia specifies a maximum of 250 mA for equipment connected to the MiniFuse 2 hub. The World Health Organization advises keeping the volume down and taking breaks when listening for long periods.

What are your return and warranty rights when buying online in the Netherlands?

For eligible distance purchases from a business, the Dutch government generally provides a 14-day cooling-off period; exceptions and the terms of the purchase still apply. There is no fixed term for the statutory warranty in the Netherlands: if a product is faulty, the seller is your point of contact.

Which product safety rules apply to an audio interface in the Netherlands?

The Netherlands Enterprise Agency (RVO) states that EU rules and, where applicable, CE marking apply to certain product groups, including electrical and electronic equipment. The applicable requirements depend on the device; according to RVO, CE marking is the manufacturer’s declaration that a product complies with the relevant legal requirements, not an independent safety certification. Check the documentation for the version you’re considering.