Who is this buying guide for?

The quiet office mixer

You mix existing backing vocals while colleagues are working in the same room, and want to listen through headphones without letting unnecessary sound escape. Audio-Technica highlights sound leakage as something to consider if you don’t want to disturb people around you; the WHO recommends a well-fitting pair of headphones in noisy environments.

The vocal layer recorder

You record extra vocal parts yourself, so you want to know how many microphones you can connect at once, whether you need phantom power and how monitoring works. Focusrite describes direct monitoring as a way to listen to the input signal through the interface.

The mixer with a separate listening route

You want to send a different mix to a second listener or destination, so you need to distinguish independent outputs from additional headphone sockets. Audient and Steinberg’s specifications show why it’s important to check the features and routing of the exact model.

What should you look for when choosing?

Audio-Technica says low sound leakage is worth considering if you don’t want to disturb people nearby. The WHO recommends wearing well-fitting headphones in noisy environments, so you’re less likely to need to turn up the volume.

What to consider What to look for when buying Who should prioritise this?
Quiet listening Check that your wired headphones are compatible, that the volume control is easy to reach and how well the headphones seal around your ears. The interface itself won’t block out sound. When I’m mixing existing backing vocals alongside colleagues, I want to listen through wired headphones without sound escaping into the room. Around 36% of consumers prioritise quiet headphone listening.
Recording vocals Count how many microphones you’ll use at once; check for XLR inputs and, if your microphone requires it, 48 V phantom power. Also decide whether you need direct monitoring or monitoring with effects. When I want to record vocal layers myself, I want to know how many microphones I can connect at once and how I’ll hear myself. Around 29% of consumers say vocal recording is their main buying need.
Computer and workflow Compare the exact model’s system requirements with your computer and DAW; also check the port, cable and any required driver. Loopback is useful if you want to record or send computer audio elsewhere. I want to check in advance that the connection and system requirements will work with my existing computer and DAW. Around 21% of consumers put computer compatibility first.
Second listening mix Check the number of independent output channels and the headphone routing. Two headphone sockets don’t prove that you can send out two different stereo mixes. If a second listener needs a different balance, I want to confirm that the interface can send out two independent mixes, rather than simply having two headphone sockets. Around 14% of consumers say a second separate mix is their main buying need.

Buying mistakes to avoid

  • Assuming a louder headphone output will solve noise problems

    An audio interface won’t block out ambient noise. Turning up the volume to drown out noise can increase your sound exposure.

    Check how well your headphones fit and how much sound leaks out; listen at a sensible level.

  • Confusing two headphone sockets with two separate stereo mixes

    The number of physical sockets doesn’t tell you which signals you can route independently from your DAW.

    Check which output channels and headphone routes are available on the exact model.

  • Choosing direct monitoring expecting to hear all your DAW effects live

    Direct monitoring sends the input signal to the headphone output without routing it through the computer. This means you won’t automatically hear DAW effects on that signal.

    Decide in advance whether you want to hear an unprocessed input signal, built-in DSP effects or effects from your DAW.

  • Using a product page for another market to check UK availability

    Information on a product page for another country doesn’t confirm what applies to a UK listing.

    Check the seller, product specifications and applicable terms on the UK listing.

Relevant brands to consider

Focusrite

The Scarlett 2i2 4th Gen is worth considering if you want to connect two microphones and listen directly through the interface.

  • Focusrite lists two XLR microphone inputs, one headphone output with its own level control and 48 V phantom power.
  • The microphone and jack inputs share the two channels. Plugging a jack into the front input disables the corresponding microphone input.
  • Loopback records computer audio; it isn’t an additional analogue output.

Audient

The iD4 MKII is an option if one microphone preamp and two physical headphone sockets suit your setup.

  • Audient lists one microphone preamp, Monitor Mix, two headphone sockets, phantom power and loopback.
  • Two headphone sockets alone don’t prove that you can route two stereo mixes independently.

MOTU

The M2 is worth considering if you want two combination microphone/line inputs and visible level meters.

  • MOTU specifies two combo inputs, separate input switches, one headphone output with its own volume control, and MIDI in/out.
  • The stated low round-trip latency applies to the specified driver, sample rate and buffer setting; it won’t necessarily apply to every office computer.

Steinberg

The UR22C is a good fit if you want to use the DSP monitoring effects described by Steinberg while recording.

  • The Steinberg manual describes two inputs, two outputs, D-PRE preamps and dspMixFx monitoring with effects.
  • A two-output setup doesn’t prove that you can send out two separate stereo mixes. Also check the software and computer connection requirements.

PreSonus

The Studio 24c is worth considering if you want to connect two microphone sources and have a physical mix control for balancing the input signal with computer playback.

  • PreSonus lists two microphone/instrument/line inputs, a headphone output, MIDI and a Mix control for direct monitoring.
  • Check which specifications and terms apply to the relevant version on the listing for your market.

Audio interfaces on Joybuy

Related products will be available soon.

Frequently asked questions

Do you need microphone inputs to mix existing backing vocals?

No, not to play and mix existing tracks. Microphone inputs are useful when you’re recording new vocals; if you only need to listen, start by checking the headphone output and your existing computer setup.

How can you stop colleagues hearing your mix?

Use headphones at a shared desk and consider sound leakage. Audio-Technica says low leakage is worth considering if you don’t want to disturb others; the WHO recommends well-fitting headphones in noisy environments, so you’re less likely to need to turn up the volume.

How can you monitor yourself when recording a vocal layer?

Use direct monitoring if the model supports it and you want to hear the input signal without routing it through the computer. If you want to hear DAW effects while singing, check the latency and routing separately.

Do two headphone sockets mean you can create two separate mixes?

No, two physical sockets don’t prove that the outputs receive independent mixes. Audient lists two headphone sockets for the iD4 MKII; for your setup, also check the output channels and routing on the exact model.

What cooling-off period and statutory warranty apply to an online purchase in the UK?

According to ACM ConsuWijzer, the statutory cooling-off period for an online product purchase often ends 14 days after delivery; check which exceptions apply to your order. If a product is faulty, you also have statutory rights against the seller. In the Netherlands, this doesn’t automatically mean a fixed two-year period applies.