Who are these audio solutions for?

Recording a single speaker

You want to capture a short introduction clearly using a simple computer setup. In this situation, microphone placement in the hall may matter more than having extra interface channels. Shure explains why the microphone’s distance and position make a difference.

Organiser recording several microphones

You want to record several speakers at the same time and need enough microphone inputs, not just a high total number of inputs. Tascam, RØDE and Focusrite product specifications list the number of microphone inputs available on each model.

Recording without a computer

You need to move equipment between rooms or record independently. With the Zoom H6essential, power, storage and the selected recording mode all matter. Zoom also explains how to use it as a USB audio interface.

What should you look for in an audio interface for speech?

Start with the limiting factor in your setup: speech clarity at the speaking position, the number of separate microphones, recording without a computer or connecting to an existing mixer.

What to consider What to look for Who is this important for?
Clear speech Make a test recording from the actual speaking position and listen back. If the recording sounds reverberant, move the microphone closer to the speaker. If I’m recording a speaker in a reverberant hall, I want to position the microphone close to their voice and check the sound of the recording beforehand. Around 40% of consumers put speech clarity first.
Separate microphone inputs Count the microphones you’ll use at the same time and check how many suitable microphone inputs each model has. If I want to record several speakers at the same time on separate tracks, I need a suitable input for every microphone. Around 30% of consumers prioritise recording microphones separately.
Recording without a computer Check whether the device can record independently, and test the power supply, storage, recording mode and playback beforehand. If there isn’t a computer available during the introduction, I want to be able to record independently and check the file on the spot. Around 20% of consumers put recording without a computer first.
Connecting to the hall mixer Ask which output the mixer provides and whether you need one mixed signal or separate microphone recordings. Then check that the input is suitable. If I want to use the existing hall mixer, the connection needs to suit its output and the signal it provides. Around 10% of consumers prioritise connecting to existing hall audio equipment.

Common pitfalls when recording in a hall

  • Buying a better interface to fix room reverb

    An interface can’t separate the speaker’s voice from reverb that the microphone has already picked up. Shure points out that a microphone can’t improve the acoustics of a room.

    Test the microphone in the actual speaking position and listen to a short recording before choosing your equipment.

    You may still need to change the microphone position or find another way to deal with background noise.

  • Confusing the total number of inputs with the number of microphone inputs

    Not every input is a microphone input. The Focusrite Scarlett Solo 4th Gen has one XLR microphone input, so check the connections on the exact model you’re considering.

    Count your microphones and other audio sources separately, then compare them with the appropriate input types on the device.

  • Using a portable recorder without preparing power and storage

    Recording independently requires different preparation from connecting an interface to a computer.

    Make a full test recording before the event and check that you can find and play back the file.

    You may need suitable storage media and a suitable power supply.

Brands to consider

Focusrite

The Scarlett Solo 4th Gen and 2i2 4th Gen are USB interfaces for computer recording. Focusrite lists one XLR microphone input on the Solo and two on the 2i2.

  • The number of XLR microphone inputs makes it easy to tell these models apart.
  • Check that the number of inputs suits all the microphones and other sources in your setup.

PreSonus

The Studio 24c is a computer interface with two microphone, instrument or line inputs. PreSonus also lists level meters and a mix control for direct monitoring.

  • Its combination of inputs and a mix control may suit a compact computer setup with direct monitoring.
  • The two inputs don’t allow you to connect more than two separate microphones directly.

Tascam

The US-4x4HR is a computer interface with four microphone/line inputs. Tascam also lists two headphone outputs.

  • Four microphone/line inputs give you room to connect several suitable sources.
  • Check the power requirements and system compatibility for your computer. This model isn’t a standalone recorder.

Zoom

According to Zoom, the H6essential is a portable recorder with four XLR/TRS inputs that can also work as a USB audio interface.

  • Its recording and interface functions give you different ways to use the device in a recording setup.
  • For standalone recording, you’ll need to prepare the power supply, storage and recording mode. Microphone placement still matters.

RØDE

According to RØDE, the RØDECaster Pro II has four combo inputs, physical faders and the option to record to microSD, USB storage or a computer.

  • Its physical mixing controls and recording options may be useful if you genuinely need those features.
  • The extra controls and production features aren’t necessarily needed for a short spoken introduction.

Audio solutions at Joybuy

Related products will be available soon.

Frequently asked questions

Do I need to switch on phantom power for a condenser microphone?

Only if the microphone requires it. The Focusrite Scarlett Solo 4th Gen has a switchable 48V function. Check your microphone’s specifications before switching on the power.

What should I test before the introduction starts?

Make a short test recording from the actual speaking position, listen back through headphones and check the input level. If the microphone is far from the speaker, the recording may sound reverberant and be difficult to understand, whatever interface you use. Shure highlights the importance of microphone placement.

What should I do if a device bought in the Netherlands turns out to be faulty?

If you bought it as a consumer, contact the seller. According to the Rijksoverheid, they can’t send you to the manufacturer to resolve the issue. A manufacturer’s warranty doesn’t replace your statutory rights, and the appropriate solution depends on the fault and the circumstances.

Can an organisation record identifiable speakers and share the recording without further consideration?

No, buying recording equipment doesn’t give you that right. The Autoriteit Persoonsgegevens says an organisation must first determine an applicable legal basis under the GDPR and inform the people concerned about, among other things, the purpose and use of the recording. The appropriate legal basis depends on the specific event and how the recording will be used; consent isn’t automatically the only possible legal basis.