Who is this guide for?

Solo guitarist using one microphone

Wants to record guitar with minimal setup and mainly needs to decide how much of the room the microphone will pick up. Shure and RØDE describe microphone setups in which using one microphone can be a starting point.

Guitarist who wants to record in stereo

Wants to use two microphones at the same time and needs to consider channel layout and microphone phase. RØDE describes stereo techniques where microphone placement plays a part.

Recording multiple sources

Wants to capture other sources at the same time as the guitar microphones, such as vocals, a pickup or a separate room microphone. Tascam specifies four microphone/line inputs for the US-4x4HR.

What should you look for when choosing?

Start by counting how many signals you want to record at the same time, on separate tracks. Then check the connections, monitoring features and setup you’ll need in the room.

What to consider What to look for Who is this important for?
Mono and room sound Check that there’s a suitable microphone input and that it provides the phantom power your microphone needs, according to its manual. If I’m using one microphone, I mainly want to capture the guitar without the room overpowering it. Around 33% of consumers prioritise simple mono recording and manageable room sound.
Stereo pair Check that you can record with two microphones at the same time; try different positions and listen to the recording in mono too. I want to use two microphones at once to create a stereo image and be able to hear how the recording sounds together. Around 27% of consumers prioritise stereo recording with two microphones.
Additional sources Count the signals you’ll record at the same time and check which connections share a channel, such as a microphone and instrument input. If I want to record a pickup or vocals separately as well as the guitar microphones, I need to know how many inputs are available at once. Around 20% of consumers prioritise having room for at least three separate sources.
Setup and monitoring Check your computer’s USB and power requirements, and look at the headphone and monitor features. I record in a hall and want to connect my computer and hear myself while I play. Around 20% of consumers prioritise practical setup and monitoring.

Common buying pitfalls

  • Assuming two inputs will take two microphones and a pickup

    With the Focusrite Scarlett 2i2 4th Gen, Focusrite says that plugging a jack into an input disables the microphone input for that channel. This means not every combination of microphones and instruments is available at the same time.

    Before you buy, list all the signals you want to record at once and check which connections share a channel.

  • Assuming a higher bit depth will prevent clipping or room noise

    Steinberg’s manual describes a 32-bit integer format for the UR22C under suitable software conditions; that doesn’t automatically mean 32-bit float recording. Bit depth also doesn’t change how much of the room the microphone picks up.

    Assess the recording format and level control separately, and make a test recording in the room.

  • Choosing a stereo pair without checking the phase

    RØDE explains that differences in the time it takes sound to reach each microphone can cause unwanted changes when the signals are combined.

    Try different microphone positions and listen to the recording in mono too.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for a setup with one or two microphones; check the channel layout if you also want to connect a pickup.

  • Focusrite specifies two XLR microphone inputs, Auto Gain and Clip Safe.
  • Plugging a jack into a front input disables the corresponding microphone input. These features won’t automatically fix room noise or every instance of overload.

MOTU

The M2 has two combination inputs for anyone who wants to record up to two microphone, line or instrument signals at the same time.

  • MOTU specifies separate 48 V switches and monitor switches for each input, a headphone output and USB bus power.
  • Two inputs still limit the number of sources you can record separately.

Audient

The EVO 4 is a compact two-channel setup for anyone who wants to use two microphones at the same time and values shared level adjustment.

  • Audient lists two microphone preamps, Smartgain, Monitor Mix and stereo linking.
  • According to Audient, Smartgain sets input levels, but it doesn’t replace a test recording or careful microphone placement.

Tascam

The US-4x4HR is designed for a setup that needs more than two separate inputs.

  • Tascam specifies four microphone/line inputs; two of these can alternatively be used as instrument inputs.
  • For use with an iPhone or iPad, Tascam specifies an additional battery pack or mains adaptor. You don’t need extra channels for one guitar microphone.

Steinberg

The UR22C is a two-channel option for anyone using the MIDI connection or DSP monitoring in their recording setup.

  • Steinberg specifies two microphone preamps and DSP monitoring.
  • The manual describes 32-bit integer with a suitable driver and software; don’t assume this means 32-bit float recording or protection against clipping.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I always need 48 V phantom power for an acoustic guitar?

No, it depends on the microphone. Check your microphone’s manual to see whether it needs phantom power, then check that your chosen interface supplies it to the input you’ll be using.

Why does a recording in a hall sound different from what I expected?

Microphone position and distance affect the balance between the guitar and the room, as Shure explains. Make test recordings from different positions. If you hear unwanted room noise, try recording closer to the instrument and listen again.

How can I avoid problems with a stereo setup?

Record each microphone on a separate channel and check the positioning by listening to the combined signal in mono as well. RØDE highlights phase differences as something to consider with stereo techniques; Audient says the EVO 4’s two inputs can be linked for a stereo guitar pair.

What if the interface doesn’t work properly with my computer or develops a fault later?

Before you buy, compare the system, USB and power requirements for the exact model with your computer. For consumer purchases in the Netherlands, statutory guarantee applies if a product doesn’t meet what you could reasonably expect under normal use; according to ACM ConsuWijzer, the seller is responsible for finding a solution.

Can I record in a community hall and publish the recording?

That depends on what you record and how you use the recording. The Dutch Data Protection Authority considers identifiable people in audio recordings to be personal data; processing outside an applicable private-use exemption requires a GDPR legal basis. According to the Dutch government, you may not distribute or make other people’s copyrighted music publicly available without permission. Check the arrangements with the venue, performers and any rights holders too: buying an interface doesn’t give you the right to publish a recording.