Who might need an audio interface?

Editing existing guitar tracks

You edit or mix recorded files and don’t need to connect a microphone or guitar. Ableton describes an audio interface as a way to connect microphones, instruments and other sources to a computer, so first check whether your computer’s audio output is enough.

Guitarist recording with one microphone

You want to record an acoustic guitar part in a student bedroom and mainly need a suitable microphone input and manageable monitoring. Shure points out that microphone placement also matters when recording in a room with unwanted room sound.

Recording two sources

You want to record two microphones, or a microphone and guitar pickup, simultaneously using separate inputs. Check the number of usable inputs and how they’re assigned: Focusrite, for example, states that a jack connection disables the XLR input on the same channel.

What should you look for when choosing one?

Ableton describes interfaces as a way to connect microphones and instruments, while Shure stresses that microphone placement also matters when recording in a room. So start by considering what you want to record and listen to at the same time.

What to consider What should you look for? Who is this important for?
Editing existing recordings only Check that your software and headphones work with your computer’s existing audio output. If I’m only editing existing files, I want to find out first whether my computer’s output is up to the job; around 21% of consumers prioritise avoiding unnecessary recording inputs.
One microphone in a student bedroom Check for an XLR microphone input and whether your microphone needs 48 V; try different microphone positions too. When I record an acoustic guitar with one microphone, I want the right connection and need to take the room into account; around 29% of consumers prioritise this recording need.
Two simultaneous sources Count microphone preamps and instrument inputs separately; check whether an XLR and jack connection share the same channel. If I want to record two sources at once, I need to know whether each has its own usable input; around 29% of consumers start by checking the number of simultaneous inputs.
Headphone monitoring and compatibility Check the headphone output, direct monitoring and support for your operating system and audio software. When I want to hear the guitar and existing tracks while playing, I look at the monitoring options and connection to my computer; around 21% of consumers make this their main consideration.

Common buying mistakes

  • Assuming two inputs mean two freely interchangeable microphone channels

    The number of connections alone doesn’t tell you whether you can use two microphones at the same time. On the Scarlett 2i2 4th Gen, a jack connection disables the XLR input on the same channel; according to Audient, the iD4 MKII has one microphone preamp.

    Before buying, map out which sources you want to connect at the same time and check which inputs are available on each channel.

    If your planned sources can’t all be connected at once, you may need a different interface.

  • Expecting a different interface to fix what you hear in the room

    When recording with a microphone, unwanted room noise or the room’s acoustics can also be captured. An interface won’t change the recording environment.

    First, try different microphone positions and recording conditions; then decide which interface features you need.

  • Switching on 48 V without checking your connected equipment

    Phantom power isn’t intended for every microphone or connection. Focusrite warns of risks with certain unbalanced or incorrectly connected equipment.

    Check the manuals for your microphone, cable and interface, and switch off phantom power when it isn’t needed.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is worth considering if you’re thinking of recording with two microphones or a combination of microphone and instrument.

  • Focusrite lists two microphone preamps, instrument modes and direct monitoring.
  • A jack connection disables the XLR input on the same channel; 48 V is applied to both microphone inputs.

Audient

The iD4 MKII is worth comparing if you want to connect one microphone and one instrument directly.

  • Audient lists one microphone preamp, one JFET instrument input, 48 V, two headphone outputs and a monitor mix.
  • Its one listed microphone preamp won’t be enough if you want to use two microphones at the same time.

Behringer

The UMC202HD is a two-channel model worth comparing for two microphones, or one microphone alongside an instrument source.

  • Behringer lists two XLR/jack inputs, instrument-level switching, 48 V and direct monitoring.
  • These model specifications alone don’t demonstrate a difference in recording quality.

Arturia

The MiniFuse 2 is worth comparing if MIDI connections are also important to you.

  • Arturia lists two inputs, MIDI in/out, 48 V and a control that mixes the input signal with the computer signal.
  • Check which sources you’ll use with each input and whether they suit your recording plans.

Steinberg

The UR22C is worth comparing if you want to use MIDI or the loopback function described, as well as recording guitar.

  • Steinberg lists two microphone preamps, one Hi-Z input, MIDI in/out and a monitor mix.
  • According to Steinberg, loopback is designed to combine incoming sound with computer audio for streaming; it isn’t essential for ordinary guitar editing.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need an audio interface if I’m only editing existing guitar recordings?

Not necessarily. If your computer’s audio output works with your software and headphones, you can start with that. An external interface is mainly useful when you need extra recording inputs or specific monitoring options.

How do I connect a condenser microphone?

First, check whether your microphone needs phantom power. Connect a microphone that requires 48 V to a suitable XLR microphone input and follow the manuals for your microphone and interface. PreSonus states that a jack connection doesn’t provide the same phantom power.

What can I do if monitoring through my recording software sounds delayed?

Use direct monitoring if your interface offers it. If you want to hear effects through your software, check the driver and buffer setting. Ableton explains that a smaller buffer can reduce latency, but it puts more strain on your computer.

What are my rights if the interface breaks soon after purchase?

With normal use, you can expect a product to do what you could reasonably expect of it. ACM ConsuWijzer explains that Dutch statutory guarantees don’t have a fixed duration for every product; if a product is faulty, the seller is your point of contact for an appropriate solution.

What conformity rules apply to an audio interface sold in the Netherlands?

Electrical and electronic equipment covered by the applicable EU rules must meet conformity requirements, and may need the required CE marking before being placed on the market. Your Europe and EUR-Lex describe the applicable EU rules; this general framework doesn’t confirm that a specific model or listing complies with them.