Who is this choice relevant to?

Podcast or recording series creator

If you regularly record speech or music, setting the gain while recording and comparing the loudness of finished episodes are two separate steps. Focusrite explains how to set an interface’s gain, while the EBU treats loudness normalisation as a separate process.

Creator with limited mains sockets

If you don’t want to use a mains socket for your interface, check whether your computer’s USB port meets the power requirements of the model you choose. Manufacturers specify different requirements for USB power.

Creator recording multiple sources

If you record microphones, instruments or stereo sources at the same time, count the inputs that are genuinely available and check their type. On some interfaces, an XLR and jack socket share the same channel.

What should you look for when choosing?

First, count how many sources you need to record at the same time. Then check USB power requirements and decide separately how you’ll monitor recording gain and assess the loudness of finished files.

Consideration What to look for when buying Who is this important to?
Consistent levels Check which meters or gain-assist features are available. Compare the loudness of finished files separately in software. If I’m recording a series, I want to check the input level and compare the loudness of episodes afterwards; around 34% of consumers prioritise consistent levels.
No extra mains socket Compare the model’s power requirements with your computer’s USB port. Audient specifies a minimum of 0.9 A at 5 V via USB 3.0 for the iD4 MKII. If mains sockets are in short supply, I want to know whether my computer can power the interface; around 33% of consumers prioritise power from their computer.
Inputs for simultaneous sources Count the microphone, line and instrument inputs you need. Focusrite states that using a jack socket on the Scarlett 2i2 4th Gen disables the corresponding XLR input. If I want to record multiple sources at the same time, I want to know in advance which connections can be used simultaneously; around 20% of consumers choose primarily based on the number and type of inputs.
Monitoring while recording Check for direct monitoring and the headphone or monitor outputs you need. A monitor volume control does not adjust the recorded file. If I want to check what I’m hearing through headphones or monitors while recording, I look at the monitoring options; around 13% of consumers prioritise monitoring.

Common buying mistakes

  • Confusing Auto Gain with automatic loudness normalisation

    Auto Gain helps you set the input level while recording. It won’t automatically make finished files the same loudness.

    Check recording peaks as you record, then use software to compare the loudness of finished files separately.

  • Assuming ‘USB-powered’ means ‘works with every USB port’

    If a computer port doesn’t supply enough power, you may still need an additional power connection.

    Compare the exact model’s power requirements with your computer’s specifications and check whether additional power is needed.

  • Counting XLR and jack inputs as separate channels

    On the Focusrite Scarlett 2i2 4th Gen, connecting a jack disables the corresponding XLR microphone input.

    Count the channels available for simultaneous use and check which type of input each source needs.

Brands to compare

Focusrite

The Scarlett 2i2 4th Gen is an option if you need two recording channels with Auto Gain and Clip Safe. The Scarlett Solo 4th Gen and 4i4 4th Gen have different connection configurations.

  • Focusrite states that the 2i2 4th Gen can be powered via USB by most computers and offers Auto Gain and Clip Safe.
  • A USB port that doesn’t supply enough power may require an additional power source. Gain features won’t automatically make finished recordings the same loudness.

MOTU

The M2 suits a setup with two flexible analogue inputs and clear meters for input and output levels.

  • MOTU specifies separate gain controls and USB power for the M2.
  • The meters don’t replace software-based loudness measurement for finished recordings. Also check your computer’s system requirements.

Audient

The iD4 MKII is designed for a compact setup with one microphone and a separate instrument input.

  • Audient specifies USB bus power and direct monitoring.
  • Audient specifies a minimum of 0.9 A at 5 V via USB 3.0. The iD4 MKII doesn’t offer the same choice of microphone inputs as a model with two microphone preamps.

Solid State Logic

The SSL 2 MKII is worth considering for a setup with two analogue inputs and stereo loopback for computer use.

  • SSL describes the SSL 2 MKII as bus-powered and specifies two microphone preamps and loopback.
  • These are manufacturer specifications, not an independent performance comparison. Loopback won’t automatically normalise loudness.

Steinberg

The UR22C is an option if you need MIDI and loopback as well as two inputs.

  • Steinberg specifies two inputs, MIDI in and out, and a loopback function for the UR22C.
  • These features are only useful if they suit your setup. Check how the interface is powered with the computer you intend to use it with.

Audio interface options

Related products coming soon.

Frequently asked questions

Will an audio interface automatically make my recordings the same loudness?

No, not with an interface’s input features alone. Set the recording gain without clipping, then use software to compare the loudness and peak levels of finished files. The EBU recommendation of −23 LUFS applies to a specific programme use and isn’t a general setting for home recordings.

Can I connect a USB-powered interface to any USB port?

No, the port must meet the power requirements of the model you choose. Audient specifies a minimum of 0.9 A at 5 V via USB 3.0 for the iD4 MKII; Focusrite states that the Scarlett 2i2 4th Gen needs a separate power connection if USB power is insufficient. Compare the requirements with your computer’s specifications.

What should I check when connecting microphones and instruments?

Check which type of input each source needs and how many inputs are available at the same time. On the Scarlett 2i2 4th Gen, connecting a jack disables the corresponding XLR input, so don’t count it as an additional simultaneous channel.

How does the legal guarantee work when buying in the Netherlands?

According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands; a product must do what you can reasonably expect of it. If there’s a fault, the retailer is your point of contact. A manufacturer’s guarantee is an extra and doesn’t replace this right.

What should I look for in product safety, and how should I dispose of an old interface?

The Dutch government states that electronic devices sold in the EU must have a CE marking; check the product information, especially if it’s offered by a seller outside the EU. According to the Dutch government, when you buy a new electrical appliance of a similar type, you can hand in your old one through the retailer under the old-for-new scheme.