Who is this buying guide for?

Editing existing drum tracks

You receive recordings to edit, mix and listen to at home. Your choice is mainly about having the right monitoring outputs and computer compatibility, rather than a large number of microphone inputs. MusicTech notes that one or two inputs are enough for many studio setups, while recording a drum kit may require more.

Recording acoustic drums at home

You want to use several microphones at the same time, so you’ll need enough microphone preamps. Thomann Blog describes a four-microphone setup for the kick, snare and two overheads.

Editing electronic drums

You’re using a drum module and want to find out whether it can send the audio or MIDI tracks you need to your computer. USB capabilities vary by model; for example, Roland describes USB audio and MIDI for the V71.

What should you look for when choosing?

Editing existing tracks

When: You receive drum recordings as files and mainly need connections for your computer, headphones and monitors.

Consider: Don’t pay for microphone channels you won’t use. The MOTU M4, for example, has two microphone preamps, plus separate line inputs, line outputs and MIDI.

Four microphones for acoustic drums

When: You want to record, for example, the kick, snare and two overheads simultaneously as separate tracks.

Consider: You’ll need four microphone preamps. Focusrite specifies four analogue inputs for the Scarlett 4i4 4th Generation, but only two of them are microphone preamps.

More microphones or room to expand later

When: You want to connect several microphones directly or expand digitally using suitable equipment.

Consider: The Scarlett 18i20 4th Generation, Audient EVO 16 and PreSonus Studio 1824c each have eight built-in microphone preamps. ADAT expansion requires additional equipment; the expansion described for the Scarlett 18i20 also has software and sample rate requirements.

Electronic drums via USB

When: Your drum module provides the audio or MIDI connection you want to use with your computer.

Consider: USB MIDI isn’t a recorded audio track. Check the capabilities of your exact module before choosing a separate interface for the drum input.

What to consider What should you check? Who is this important for?
Listening and editing Check computer compatibility, the headphone connection and monitor outputs, and whether you need separate output mixes. If I mainly edit existing tracks, I want to connect my headphones and monitors appropriately. Around 40% of consumers prioritise listening and editing.
Recording several microphones at once Count the microphones in your setup and compare that number with the built-in microphone preamps, not the total number of inputs. If I want to record the kick, snare and overheads separately, I need to be able to use all the microphones at the same time. Around 30% of consumers prioritise multitrack acoustic drum recording.
Computer and signal routing Compare the system requirements for your computer and count microphone, line, MIDI and monitor connections separately. If my computer connection and separate signal paths are decisive, I want to compare the connections I need in advance. Around 20% of consumers prioritise compatibility and routing.
Electronic drums Check whether USB supports audio, MIDI or both with your exact drum module, and which audio tracks are available. I want to find out what my drum module can send to my computer before choosing an interface with the right functions. Around 10% of consumers prioritise the module connection.

Common buying mistakes

  • Confusing the total number of inputs with the number of microphone preamps

    The Scarlett 4i4 4th Generation has four analogue inputs, but two of them are line inputs. You can’t connect four microphones directly without additional equipment.

    Count the built-in microphone preamps and the microphones you want to use at the same time separately.

  • Assuming ADAT means extra microphone inputs are built in

    Optical expansion requires suitable additional equipment. The expansion of the Scarlett 18i20 4th Generation to 16 ADAT channels described by Focusrite also has specific software and sample rate requirements.

    First check the number of built-in preamps and what equipment and settings you’ll need for the expansion you want.

  • Automatically choosing a large separate interface for electronic drums

    A drum module may offer USB audio and MIDI, but the available features and number of audio tracks depend on the model.

    Check your module’s manual and decide whether you want to edit audio, MIDI or both.

Brands to compare

Focusrite

The Scarlett 2i2 and 4i4 4th Generation are designed for a compact workspace, while the Scarlett 18i20 4th Generation has eight built-in microphone preamps.

  • The Scarlett 18i20 4th Generation has eight built-in microphone preamps.
  • The Scarlett 4i4 4th Generation has four analogue inputs, but only two microphone preamps. The expansion to 16 ADAT channels described here requires Focusrite Control 2 version 1.490 and a sample rate of 44.1 or 48 kHz.

MOTU

The M4 combines two microphone preamps with additional line and MIDI connections for a desk setup with several signal paths.

  • MOTU specifies four analogue inputs and four balanced TRS line outputs.
  • Two of the inputs are XLR/TRS microphone/line combo sockets; check your computer’s system requirements.

Audient

The EVO 16 is designed for setups that need eight microphone channels straight away, with optical expansion as an option.

  • Audient specifies eight preamps and optical expansion.
  • Check the exact channel configuration for your intended sample rate and expansion equipment.

PreSonus

The Studio 1824c is worth comparing if you need eight built-in microphone preamps and an ADAT input.

  • PreSonus specifies eight microphone preamps and an ADAT input for additional channels.
  • Check which additional equipment and settings are right for your intended setup.

Related products

Related products coming soon.

Frequently asked questions

Do I need eight inputs to edit existing drum recordings?

No, not just because the existing files contain several tracks. First decide which headphones, monitors and outputs you want to use. Extra microphone preamps are mainly relevant if you’re recording several microphones at once yourself.

Can I connect four drum microphones to an interface with four inputs?

Not necessarily: the total number of inputs doesn’t tell you how many microphone preamps are available. Focusrite specifies two microphone preamps and two additional line inputs for the Scarlett 4i4 4th Generation, so check the input types before choosing a four-microphone setup.

What do I need to set up for ADAT expansion?

First check the requirements for the exact model and any additional equipment. For expanding the Scarlett 18i20 4th Generation to 16 ADAT channels, Focusrite specifies Focusrite Control 2 version 1.490 and a sample rate of 44.1 or 48 kHz.

What costs and rights apply if my interface develops a fault?

Count microphones and any expansion equipment separately; an ADAT port doesn’t provide extra microphone preamps on its own. If your interface develops a fault, you can contact the seller. The Government of the Netherlands states that there is no fixed statutory guarantee period in the Netherlands for every product.

Is a CE marking on an audio interface enough to know that it complies with the rules?

A CE marking is required when the relevant EU rules require it for the product, but it isn’t independent certification by a central EU body. The European Commission explains that the manufacturer declares the product’s conformity. Check the product and seller information for any specific offer.