Quiet bedroom mixer
You mainly mix existing folk tracks on headphones and want to work out whether an interface would add anything.
If you’re only mixing existing folk tracks, you don’t necessarily need an audio interface: Bax Music notes that a computer’s built-in audio chip is often good enough for computer-based work. If you also want to record or connect external monitors, choose one based on how many microphone and instrument inputs you need at once, its monitoring options and your computer’s connections.
You mainly mix existing folk tracks on headphones and want to work out whether an interface would add anything.
You want to record your own folk parts; whether you need a direct instrument input or two microphone inputs depends on your recording setup.
You switch between mixing and recording on a laptop, so you need to consider USB power, available ports and straightforward monitoring.
A good fit if: you’re not recording anything and your current computer and headphones already meet your needs.
Trade-off: in that case, an interface won’t add any essential recording inputs.
A good fit if: you want to record vocals and a directly connected guitar at the same time, for example.
Trade-off: one microphone preamp isn’t enough to use two microphones at once.
A good fit if: you want to record vocals and an acoustic guitar using separate microphones, for example.
Trade-off: check the connections on each model; on the Scarlett 2i2 4th Gen, connecting a front jack disables the corresponding microphone input.
First decide whether you’ll only be mixing or recording too. Then count the sources you want to connect at once and check that your laptop can power the interface.
| What to consider | What should you look for? | Who is it for? |
|---|---|---|
| Quiet, practical mixing | Check whether your current headphone output does the job. If you’re connecting monitors, make sure their inputs match the interface outputs. | If I’m mixing existing folk tracks on headphones in a student room, I want to know whether my current setup is good enough. Around 36% of shoppers prioritise practical, quiet mixing. |
| Simultaneous inputs | For each source, note whether you’re connecting a microphone, instrument or line-level signal. One mic/line input plus one instrument input isn’t the same as two microphone inputs. | If I want to record vocals and guitar at the same time, the inputs need to suit both sources. Around 29% of shoppers prioritise having enough inputs for simultaneous recording. |
| Laptop and monitoring | Check the model version, operating system, computer port and USB power requirements. Direct monitoring lets you hear the input directly; a smaller software buffer puts more demand on the CPU. | If I switch between mixing and recording on my laptop, I want to make sure the connection and monitoring options suit my workflow. Around 21% of shoppers prioritise laptop compatibility. |
| Features you’ll use | Think about what you’ll actually record and check whether any software and cables are included with the specific offer. | If I want to avoid paying for inputs or features I won’t use, I’ll start with what I need to record. Around 14% of shoppers prioritise avoiding features they won’t use. |
Mixing existing tracks doesn’t automatically mean you need microphone or instrument inputs.
Start with your listening and connection needs, and only choose an interface if it solves a specific problem.
The AudioBox GO combines one mic/line combo input with a separate instrument input; the Scarlett 2i2 4th Gen has two XLR microphone inputs.
For each source you want to record at the same time, note whether you’ll be using an XLR microphone, instrument or line-level signal.
A selection of interfaces on Interface.nl dated 17 March 2025 lists 24-bit/192 kHz for the iD4 MKII, while Audient gives a maximum of 24-bit/96 kHz for the MKII.
Check the exact generation and the manufacturer’s latest documentation before letting the sample rate influence your choice.
The Scarlett 2i2 4th Gen is an option if you’re looking for two microphone inputs and separate instrument connections.
The iD4 MKII is suited to a compact setup with one microphone and one directly connected instrument.
The AudioBox GO combines a microphone/line input with a separate instrument input, for vocals and direct guitar, for example.
The MiniFuse 2 is an option if you want two inputs and may connect MIDI equipment.
The SSL 2 MKII is designed for a desktop setup with two microphone channels and two headphone connections.
Not necessarily. First check whether your computer’s headphone output and your current listening setup meet your needs. Recording inputs won’t solve a recording problem if you’re only mixing.
Use direct monitoring if you want to hear the input without routing it through the software. If you hear an echo, check whether the same input signal is also being sent back through your recording software. A smaller buffer can speed up software monitoring, but it increases the load on the CPU.
Check that the USB port you’re using can meet Audient’s power requirement: a minimum of 0.9 A at 5 V via a suitable USB 3.0 port. This applies to the iD4 MKII and isn’t a general requirement for all interfaces.
Many consumer purchases made at a distance come with a 14-day cooling-off period; check the terms of the specific purchase. According to the Dutch government, there’s no fixed period for the statutory guarantee: a product must conform to the agreement, and the seller is your point of contact if it’s faulty.
No. According to the Dutch government, CE isn’t a quality mark: it means the manufacturer declares that the product meets the applicable EU rules. The logo doesn’t prove audio performance.